Go Back   DriverHeaven.net > Forums > Graphics Cards > nVidia ForceWare Drivers > Windows XP & Linux nVidia Display Drivers

Notices

Reply
 
LinkBack Thread Tools Display Modes
Old Dec 21, 2004, 03:02 AM   #1 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

Serious Computer Problem - Help Please

Hi guys, i got a new Gcard from Gainward - FX 5600 256MB.
I first removed all the drivers and dl'd the 71,20 (Currently Using)
I took out my old card (MX440) and put it in.

Upon turning my computer on, i heard 1 Long Beep and 2 Short beeps ,
Meaning my Gcard was not detected or faulty, and it just wouldnt work no matter how many times i reset it.

Luckily i had my old comp, and i put the card into it, it ran flawlessly, which was quite strange.

I then took it out and put it into my good computer and it worked!, it got into windows, i installed the drivers and reset.
Then agian i heard those damn dreadful beeps, i kept reseting, and on third reset it worked and it got into windows, but it froze shortly after, as if no power to mouse but there as

I took my old card put it in, got onto net and talked to a friend who told me i should update my VIA p4pb 400-l mobo, so i did, and it worked out great, i could stay on for a while, and play games, but It started to randomly freeze again - and still does.

After reseting the beeps come ,and i gota reset/ turn comp of 2-4 times to get into it, and the freezes i have no idea how to fix

So any ideas would be GREATLY appriated, i was thinking it might be with the 71,21 Beta drivers, but maybe not.


A bit of info what happens when it randomly freezes, the screen goes black and it says Frequency Out of Range - H: 340KHz V:340Hz (thats crazy!! no monitor can support that , so why does it use it?), and then when i reset my comp wont detect my gcard untill i reset itliike 5-10 times

Please help

Last edited by Unemuzerexer; Dec 21, 2004 at 03:26 AM.
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 03:25 AM   #2 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

clear your CMOS (bios) via jumper or by removeing the motherboard battery
make sure the system is unplugged

wait 10 seconds and replace jumper to proper poition or , put battery back in board

boot, load power on defaults
see if that works
...............
check your temps and voltages
...............
see if there is an updated bios for your board
...............
make sure you have at lest a 250W-300W PSU
...............

try uping AGP voltage to 1.6V
................

try useing AGP 4x
..................

(also try useing driver cleaner) if you get it booting
__________________

Last edited by The_Neon_Cowboy; Dec 21, 2004 at 03:46 AM.
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 03:30 AM   #3 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

Sorry if i ask, but my parents will kill me if i kill this comp, so can u just tell me what this will do?

Thnx.
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 03:31 AM   #4 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

Should i try a different driver? too ? like the latest NVIDA one?
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 03:43 AM   #5 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

Quote:
Originally Posted by Unemuzerexer
Sorry if i ask, but my parents will kill me if i kill this comp, so can u just tell me what this will do?

Thnx.
clears and resets the bios to defaults...

Quote:
Originally Posted by Unemuzerexer
Should i try a different driver? too ? like the latest NVIDA one?
ya you can but you need to get it to boot properly / regularly
1st....

one thing at a time if it isn't booting right then it's not going to work right

fix boot , then worry about windows



.................


How about a full list of system spec's / hardware
__________________
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 03:45 AM   #6 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

K then , thnx
But 1 thing, someone told me if u reset the CMOS you gota set everything up again, and i have no idea what each settings should be, so will this be a problem?

P4 2.53
512 Ram
80 GIg HD
Gainward fx5600 256mb (not workingreally good)
VIA P4PB 400-L
what else?
DX 9.0C
Latest Mobo drivers + flashed bios to latest.
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 03:48 AM   #7 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

Quote:
Originally Posted by Unemuzerexer
K then , thnx
But 1 thing, someone told me if u reset the CMOS you gota set everything up again, and i have no idea what each settings should be, so will this be a problem?
Well depends.... most people can and do run on the defaults

is theis a custom / homebuilt system?
or a brand name like dell / compaq / hp / sony etc?

might go in and hand write down what everythings set on in the bios just in case ....
__________________
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 03:50 AM   #8 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

It was custom built, yeah i might do, first i'm try increasing Voltage -.-

if it only didnt freeze and say frequeny out of range - 340, (340 refresh rate) it wouldnt be sSOO bad .
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 03:52 AM   #9 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

Quote:
Originally Posted by Unemuzerexer
It was custom built, yeah i might do, first i'm try increasing Voltage -.-
ok the default AGP voltage is 1.5V
you want to try 1.6V just to see if it helps

if it doesn't you can safely leve it or set it back

(BTW: don't get agp & cpu voltage confused )
__________________
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 03:54 AM   #10 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

rofl i wont :P
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 04:36 AM   #11 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

Well i'm on my new gcard, reset jumper, changed Vto 1.6, and it loaded fine, hopefully it wont freeze, awell, only time tells, talk latee.r
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 04:55 AM   #12 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

Quote:
Originally Posted by Unemuzerexer
Well i'm on my new gcard, reset jumper, changed Vto 1.6, and it loaded fine, hopefully it wont freeze, awell, only time tells, talk latee.r
well good luck! might re install your video card drivers



.................................................. ................
if you get issues at this point
.................................................. ................

be sure to uninstall your graphics driver
try driver cleaner http://www.driverheaven.net/cleaner/
clean your nvidia display drivers only....

reboot
then re install your graphics driver...
(if neccecary use the NV fix in driver cleaner, if you get an install error)
__________________
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 04:57 AM   #13 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

Reset comp 4 times now, no probs, game froze tho, guessing its those beta drivers uninstalling them now, gona instal the 70,20, = good reviews, gona run the driver cleaner too D:
Unemuzerexer is offline   Reply With Quote
Old Dec 21, 2004, 05:25 AM   #14 (permalink)
The_Neon_Cowboy
DriverHeaven Extreme Member
 
The_Neon_Cowboy's Avatar
 
Join Date: Dec 2002
Location: U.S.A.
Posts: 16,122
The_Neon_Cowboy is on a distinguished road
System Specs

Quote:
Originally Posted by Unemuzerexer
Reset comp 4 times now, no probs, game froze tho, guessing its those beta drivers uninstalling them now, gona instal the 70,20, = good reviews, gona run the driver cleaner too D:
k let us know

(going to bed soon, it's 5 am here)
__________________
The_Neon_Cowboy is offline   Reply With Quote
Old Dec 21, 2004, 06:12 PM   #15 (permalink)
Unemuzerexer
DriverHeaven Junior Member
 
Join Date: Aug 2003
Posts: 47
Unemuzerexer is on a distinguished road

I changed drivers, and the freezing stopped, tho it feels kinda sluggish.

EDIT: Bah i had to reset my comp, and the beeping came back, but its strange cause after i reset my CMOS, it works fine again, dont know why :S

Last edited by Unemuzerexer; Dec 21, 2004 at 07:04 PM.
Unemuzerexer is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump




 

 
Powered by: vBulletin
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
SporeHeaven skin by Allan "Zardon" Campbell, for Electronic Arts. vBulletin implementation by Craig '5320' Humphreys

All times are GMT -5. The time now is 11:19 PM. Copyright ©2008 DriverHeaven.net