ATI Tray Tools Advanced Tweaks.

don9600xt · Sep 13, 2005, 02:56 PM

Hi Ray, I just installed the latest 5.8 radeon drivers and your latest tray tools on my new Abit9600XT card and have a couple of questions:

The Fan section of the Overclocking menu indicates " no supported hardware found ", but the vGuru panel that came with the card allows control of fan speed vs. core temp so the hardware appears to support fan control. Is this a bug or?

The other question is on the Screenshot menu I specified to store them as jpegs but they are stored as bmp. What am I doing wrong?

Finally, is there a plugin that works with your Tray Tools that allows me to display Core Temp and Fan speed other than using LCDC or Smartie which I couldn't get to display that data?

The program is excellent, Ray, thanks for your efforts.

*Ray Adams* · Sep 14, 2005, 06:46 AM

For FAN control. As I know ATT doens't support GigaByte boards with WinBond but I don't know about Abit 9600XT. Can you check it with RivaTuner?

About screenshots. Please read readme.txt about it. jpg/png will be only when any games are active and OSD enabled

Quote:

Finally, is there a plugin that works with your Tray Tools that allows me to display Core Temp and Fan speed other than using LCDC or Smartie which I couldn't get to display that data?

I don't understand. Do you mean plguinf for other LCD or other plugin for LCDC or Smartie?

don9600xt · Sep 14, 2005, 05:11 PM

Quote:

Originally Posted by Ray Adams

For FAN control. As I know ATT doens't support GigaByte boards with WinBond but I don't know about Abit 9600XT. Can you check it with RivaTuner?

About screenshots. Please read readme.txt about it. jpg/png will be only when any games are active and OSD enabled

I don't understand. Do you mean plguinf for other LCD or other plugin for LCDC or Smartie?

I ran RivaTuner, and do not see any fan speed in the hardware monitoring category. I do see core and ambient temp. Can these be displayed in ATT?

The Abit vGuru control panel monitors and reports fan speed so the info must be there. It also reports core temp, core and memory speed so that data is also present.

What I mean is: Is there a plugin for ATT that allows the display of core temp and fan speed that doesn't require me to run LCDC or Smartie?

Thanks

*Ray Adams* · Sep 15, 2005, 01:52 AM

If RivaTuner can show it, ATT showld shot it too.
Can you run RivaTuner with this parameters
RivaTuner.exe /i2cdump and send dump file to traytools(at)guru3d.com.

don9600xt · Sep 15, 2005, 11:56 AM

It's on its way, Ray.
Thanks

*Ray Adams* · Sep 15, 2005, 01:52 PM

sent pm to you

don9600xt · Sep 15, 2005, 06:57 PM

Ray, the data you want is available in RAR format at:

[color=white]http://personal.idcomm.com/dhf/images/i2cdumps.rar[/color]

read the readme.txt file which explains the dumps and images of the vGuru panel
http://personal.idcomm.com/dhf/images/i2cdumps.rar

sslaytanic · Sep 17, 2005, 11:28 AM

what does a "?" mean in that thread? just to leave it at default? deactivate it?

Callous · Oct 8, 2005, 02:31 AM

I was wondering where the option to change the clock speeds, then exiting ATI Tools when booting up into windows went.

I remember seeing this in an earlier version

Graham · Oct 25, 2005, 09:12 PM

Thank you for a terrific program, Ray. I am hoping that you can clarify something that has had me uncertain for some time. I trust this has not been asked a hundred times before.
If one has both ATI Control Panel and ATT installed, do the settings have to agree? If not, which program would take precedence? Would settings in ATI CP overrule ATT?
thanks.

*Ray Adams* · Oct 26, 2005, 01:22 AM

Quote:

Originally Posted by Graham

If one has both ATI Control Panel and ATT installed, do the settings have to agree?

No

. I've told a lot of times. ATT works directly with Catalyst settings when applying and reading settings. Control Panel and CCC - when applying its change Catalyst values but when displaying current settings both of them reads settings from their own values! I don't want to update thouse values too. Why I have to do their job? Developers from ATI thinks that nobody can Change actual settings for Catalyst so no needs to read real values

Quote:

If not, which program would take precedence? Would settings in ATI CP overrule ATT?
thanks.

ATT

dzjepp · Dec 7, 2005, 11:36 PM

Hi,

Can you please tell me how to remove the file right-click extension for att game profile. I am using the omega version of att.

Thanks.

*Ray Adams* · Dec 8, 2005, 02:35 AM

regsvr32.exe /U "here path to the ATT folder\attext.dll"

harris78 · Dec 20, 2005, 11:55 AM

Hi!
I have installed latest Omega drivers (5.12 based) and ATT but when I load ATT and try to play a game or just to go to screen properties-> advanced tab, the laptop freezes (I have an Acer laptop with x700 mobility). The same problem when I start 3Dmark05. I reinstalled the Drivers and ATT (I used driver cleaner pro, too) with no luck. If I don`t load the ATT everything is working fine. I have to say that I have the same problems also when I close ATT (so I have disabled the load with windows option of ATT).
Thanks!

*Ray Adams* · Dec 21, 2005, 02:19 AM

It is known issue with X700 Mobility. Open atitray.ini and change opt_disable_i2c=0 to opt_disable_i2c=1. Close ATT before make changes

Dyre Straits · Dec 29, 2005, 04:16 AM

Ray,

I'm presently using the Extreme ATi drivers based on CAT 5.13. After installing them, I've installed the newest ATT and finished CoD2 earlier tonight. Then I played around with FLATOUT for a little while. In BOTH of those games my quickkey for Screenshots worked flawlessly. (F12 saved to a folder on my D Drive.)

Well, now I've started up F.E.A.R. and the OSD is working but my quickkey for SSs isn't. Do you have any idea as to why not?

Thx!!

*Ray Adams* · Dec 30, 2005, 07:32 AM

HotKeys doesn't work under FEAR, because this game block all low level keyboard hooks.

Dyre Straits · Dec 30, 2005, 01:38 PM

Quote:

Originally Posted by Ray Adams

HotKeys doesn't work under FEAR, because this game block all low level keyboard hooks.

Ahhhhh. OK, thanks.

map · Jan 23, 2006, 07:53 PM

i think i screwed up. i was overclocking my card with the tray tools. after my last increase my machine runs fine, but now when ever i click on the tray tools my monitor shuts off and i have to hard boot my machine. any help?

highkick · Jan 23, 2006, 10:27 PM

NO expert here, but u could boot into safe mode and try to change the Tray Tools settings from there, or uninstall and Reinstall ATI TrayTools..

map · Jan 23, 2006, 11:58 PM

thanks, i tried safe mode and it wouldn't load tray tools. i don't see anyway to uninstall tray tools exclusively. oops, i was looking in control panel for the uninstall and all the time it was in the omega drivers.

OmegaRED · Feb 3, 2006, 06:08 PM

This might be a dumb question but can I uninstall Catalyst Control Panel if I'm using ATT and still get AI?

[hobo]eclipse · Feb 3, 2006, 06:17 PM

Quote:

Originally Posted by OmegaRED

This might be a dumb question but can I uninstall Catalyst Control Panel if I'm using ATT and still get AI?

pretty sure you'll be fine, i have never ran the CCC yet, and i always have the AI on low, or play around sumtimes on high in ATI tray tools, unless that is it just never worked!:P no, but remember when AI first came out Omega had it first in with radlinker before the officail cats even supported it.

BWX · Feb 14, 2006, 08:55 AM

Quote:

Originally Posted by Ray Adams

For thouse lazzy guyz who knows nothing about search engines and so on.
here is a small FAQ and a few descriptions about ATI Tray Tools Adavnced tweaks.
http://atitray.fangel.ru/viewtopic.php?t=44
______________
Stop asking me about full explanation!!! Look at the caption of Advanced Tweaks window! Advanced Registry Tweaks. This is just editor for external tweaks database files located in Database folder!

Quote:

Please enter your username and password to log in.

Username:
Password:
Log me on automatically each visit:

*Ray Adams* · Feb 15, 2006, 01:51 AM

I forces to close forum only for registered users , sorry.

BWX · Feb 15, 2006, 02:08 AM

Oic

~~Sanafabich~~ · Feb 15, 2006, 04:48 AM

Quote:

Originally Posted by Omegadrive

Quote:

Originally Posted by Ray Adams

Can moderators pin this topic please?

I did

geez, get a room!

I liked radlink better

BWX · Feb 15, 2006, 04:53 AM

Quote:

Quote:
Originally Posted by Omegadrive
Quote:
Originally Posted by Ray Adams
Can moderators pin this topic please?

I did

Quote:

Originally Posted by Sanafabich

geez, get a room!

I liked radlink better

Brilliant!

*Ray Adams* · Feb 16, 2006, 12:32 AM

Just opened forums only for read for all visitors

bryan065 · Feb 16, 2006, 12:48 PM

hi im new to this site. i've just downloaded the omega driver and installed it along with the ATI tray tools. but i ran into trouble;

whenever i open the tray tools, my computer goes to a blue error screen. ive restarted and tried it several times but same results. can anyone tell me wats wrong?

i have a sony VAIO pcg-k13.
P4 2.8Ghz
40GB hdd
384MB (128MB)
ATI RADEON IGP 345M

i'm not sure if i posted this in the right place but this is about ati tray tools ^^'' thanks.

Sep 13, 2005, 02:56 PM	#31
don9600xt DriverHeaven Newbie Join Date: Sep 2005 Posts: 4 Rep Power: 0	ATI Tray Tool install/config questions Hi Ray, I just installed the latest 5.8 radeon drivers and your latest tray tools on my new Abit9600XT card and have a couple of questions: The Fan section of the Overclocking menu indicates " no supported hardware found ", but the vGuru panel that came with the card allows control of fan speed vs. core temp so the hardware appears to support fan control. Is this a bug or? The other question is on the Screenshot menu I specified to store them as jpegs but they are stored as bmp. What am I doing wrong? Finally, is there a plugin that works with your Tray Tools that allows me to display Core Temp and Fan speed other than using LCDC or Smartie which I couldn't get to display that data? The program is excellent, Ray, thanks for your efforts.

Sep 15, 2005, 01:52 AM	#34
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	If RivaTuner can show it, ATT showld shot it too. Can you run RivaTuner with this parameters RivaTuner.exe /i2cdump and send dump file to traytools(at)guru3d.com. __________________ ATI Tray Tools

Sep 15, 2005, 01:52 PM	#36
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	sent pm to you __________________ ATI Tray Tools

Oct 25, 2005, 09:12 PM	#40
Graham DriverHeaven Newbie Join Date: Oct 2002 Location: Winnipeg, Canada Posts: 19 Rep Power: 0	ATT Question Thank you for a terrific program, Ray. I am hoping that you can clarify something that has had me uncertain for some time. I trust this has not been asked a hundred times before. If one has both ATI Control Panel and ATT installed, do the settings have to agree? If not, which program would take precedence? Would settings in ATI CP overrule ATT? thanks.

Dec 8, 2005, 02:35 AM	#43
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	regsvr32.exe /U "here path to the ATT folder\attext.dll" __________________ ATI Tray Tools

Sep 15, 2005, 11:56 AM	#35
don9600xt DriverHeaven Newbie Join Date: Sep 2005 Posts: 4 Rep Power: 0	It's on its way, Ray. Thanks

Sep 15, 2005, 06:57 PM	#37
don9600xt DriverHeaven Newbie Join Date: Sep 2005 Posts: 4 Rep Power: 0	Ray, the data you want is available in RAR format at: [color=white]http://personal.idcomm.com/dhf/images/i2cdumps.rar[/color] read the readme.txt file which explains the dumps and images of the vGuru panel http://personal.idcomm.com/dhf/images/i2cdumps.rar

Sep 17, 2005, 11:28 AM	#38
sslaytanic DriverHeaven Newbie Join Date: Jul 2005 Posts: 14 Rep Power: 0	what does a "?" mean in that thread? just to leave it at default? deactivate it?

Oct 8, 2005, 02:31 AM	#39
Callous DriverHeaven Junior Member Join Date: Dec 2004 Posts: 20 Rep Power: 0	I was wondering where the option to change the clock speeds, then exiting ATI Tools when booting up into windows went. I remember seeing this in an earlier version

Dec 7, 2005, 11:36 PM	#42
dzjepp Black Mesa Join Date: Jan 2003 Location: Chicago, IL Posts: 77 Rep Power: 0	Hi, Can you please tell me how to remove the file right-click extension for att game profile. I am using the omega version of att. Thanks.

Dec 20, 2005, 11:55 AM	#44
harris78 DriverHeaven Newbie Join Date: Dec 2005 Posts: 1 Rep Power: 0	Hi! I have installed latest Omega drivers (5.12 based) and ATT but when I load ATT and try to play a game or just to go to screen properties-> advanced tab, the laptop freezes (I have an Acer laptop with x700 mobility). The same problem when I start 3Dmark05. I reinstalled the Drivers and ATT (I used driver cleaner pro, too) with no luck. If I don`t load the ATT everything is working fine. I have to say that I have the same problems also when I close ATT (so I have disabled the load with windows option of ATT). Thanks!

Dec 21, 2005, 02:19 AM	#45
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	It is known issue with X700 Mobility. Open atitray.ini and change opt_disable_i2c=0 to opt_disable_i2c=1. Close ATT before make changes __________________ ATI Tray Tools

Dec 30, 2005, 07:32 AM	#47
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	HotKeys doesn't work under FEAR, because this game block all low level keyboard hooks. __________________ ATI Tray Tools

Jan 23, 2006, 07:53 PM	#49
map DriverHeaven Newbie Join Date: Jan 2006 Posts: 6 Rep Power: 0	i think i screwed up. i was overclocking my card with the tray tools. after my last increase my machine runs fine, but now when ever i click on the tray tools my monitor shuts off and i have to hard boot my machine. any help?

Jan 23, 2006, 10:27 PM	#50
highkick DriverHeaven Junior Member Join Date: Jul 2003 Posts: 75 Rep Power: 0	NO expert here, but u could boot into safe mode and try to change the Tray Tools settings from there, or uninstall and Reinstall ATI TrayTools.. __________________ ATI 9600 Pro (Retail BBA)

Jan 23, 2006, 11:58 PM	#51
map DriverHeaven Newbie Join Date: Jan 2006 Posts: 6 Rep Power: 0	thanks, i tried safe mode and it wouldn't load tray tools. i don't see anyway to uninstall tray tools exclusively. oops, i was looking in control panel for the uninstall and all the time it was in the omega drivers.

Feb 3, 2006, 06:08 PM	#52
OmegaRED In Fedor We Trust Join Date: Oct 2002 Location: Ottawa , Canada Posts: 4,788 Rep Power: 85 System Specs	This might be a dumb question but can I uninstall Catalyst Control Panel if I'm using ATT and still get AI? __________________

Feb 15, 2006, 01:51 AM	#55
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	I forces to close forum only for registered users , sorry. __________________ ATI Tray Tools

Feb 15, 2006, 02:08 AM	#56
BWX Spinal Tapped Join Date: Nov 2002 Location: USNY Posts: 19,570 Rep Power: 92 System Specs	Oic __________________ One Big Ass Mistake America

Feb 16, 2006, 12:32 AM	#59
Ray Adams DriverHeaven Addict Join Date: Aug 2004 Location: USSR Posts: 350 Rep Power: 0 System Specs	Just opened forums only for read for all visitors __________________ ATI Tray Tools

Feb 16, 2006, 12:48 PM	#60
bryan065 DriverHeaven Newbie Join Date: Feb 2006 Posts: 2 Rep Power: 0	hi im new to this site. i've just downloaded the omega driver and installed it along with the ATI tray tools. but i ran into trouble; whenever i open the tray tools, my computer goes to a blue error screen. ive restarted and tried it several times but same results. can anyone tell me wats wrong? i have a sony VAIO pcg-k13. P4 2.8Ghz 40GB hdd 384MB (128MB) ATI RADEON IGP 345M i'm not sure if i posted this in the right place but this is about ati tray tools ^^'' thanks.

LinkBacks (?) LinkBack to this Thread: http://www.driverheaven.net/windows-xp-2k-radeon-display-drivers/80292-ati-tray-tools-advanced-tweaks.html
Posted By	For	Type	Date
The Unofficial ATT Tweaks Thread - Guru3D.com Forums	This thread	Refback	Mar 16, 2009 10:59 AM
The Unofficial ATT Tweaks Thread - Guru3D.com Forums	This thread	Refback	Jan 25, 2009 04:11 PM
The Unofficial ATT Tweaks Thread - Guru3D.com Forums	This thread	Refback	Dec 6, 2008 10:59 AM
ATI tray Tools - - hardwareBG	This thread	Refback	Jun 24, 2008 04:50 AM
The Unofficial ATT Tweaks Thread - Guru3D.com Forums	This thread	Refback	Apr 7, 2008 03:00 AM
Advanced Registry Tweaks - Guru3D.com Forums	This thread	Refback	Mar 16, 2008 07:06 PM
Compaq v4000t ati x700 OVERHEATS! - NotebookForums.com	This thread	Refback	Mar 12, 2008 12:09 PM
The Unofficial ATT Tweaks Thread - Guru3D.com Forums	This thread	Refback	Feb 29, 2008 06:08 AM