Rate Catalyst 5.5 (CCC Only)

***Zardon*** · May 17, 2005, 02:29 PM

You know the drill, vote !

INSTG8R · May 17, 2005, 04:17 PM

See no significant changes good or bad

Robert McClelland · May 17, 2005, 06:23 PM

So far np with it

petri1 · May 18, 2005, 01:13 AM

well i have noticed that it sometimes tend to freeze for a short time but not that it freeze altogether but still it si a bit jerky but then again i don´t use it so often and because i don´t know everything and every option like i do with the old cp

so but ti works withou lock ups and so on

so i guess it has been improved from time to time and gets better all the time

so keep it up ATI

LDBlues · May 18, 2005, 02:08 AM

This time around....I get several errors while using the ccc. Not an improvement....and still their is no point in using it.

Poppi · May 18, 2005, 09:52 AM

Voting right now would give these drivers a 1. However, I will withhold my ballot and wait a reasonable amount of time for someone to help me with my Trackmania Sunrise issue in the main 5.5 thread.

Edit: Wrong thread. Will C and P to drivers poll. Mods. please feel free to delete this post.

Ricky1810 · May 18, 2005, 06:44 PM

Is it offtopic to ask whats the advantage in CCC over the classic control panel?

Ingmar Kalkman · May 20, 2005, 01:38 PM

Some obversations about the 5.5 CCC. I hope ATI keeps improving it.

- When installed over the 5.4 crash on the 3D viewer. Warning should be given that first CCC must be uninstalled.
- starts slow (why so much internet traffic???)
- some help index refers to wrong item (starting at "Video for Pre-Radeon(R) 9500 Series")
- loses 3d full screen gamma settings when window mode or <ALT> <TAB>
- wanted: option to automaticaly set highest refresh rate on resolution change
- wanted: easier acces to resolution change.

That's it for now.... Game on!

Zorg · May 20, 2005, 07:47 PM

Quote:

Originally Posted by Ingmar Kalkman

Some obversations about the 5.5 CCC. I hope ATI keeps improving it.

- When installed over the 5.4 ...!

The better way is uninstall old driver first, get Driver Cleaner and remove all debris (best in WinXP safe mode). Reboot and install new driver.

Ingmar Kalkman · May 20, 2005, 08:04 PM

Quote:

Originally Posted by Zorg

The better way is uninstall old driver first, get Driver Cleaner and remove all debris (best in WinXP safe mode). Reboot and install new driver.

Thanks! I knew that but I wanted to see if that was changed with the CCC version. When installing there even is a message "removing old version"... There is no warning displayed when installing over a previous version. This gives mr Avarage User the idea that everything is fine, while it's not... So either it should work or the user should be given a warning before installing the driver+CCC. IMHO of course

Edit: By the way... I climbed the Sydney harbour bridge...

Zorg · May 20, 2005, 09:11 PM

Quote:

Originally Posted by Ingmar Kalkman

..... This gives mr Avarage User the idea that everything is fine, while it's not... So either it should work or the user should be given a warning before installing the driver+CCC. IMHO of course

Edit: By the way... I climbed the Sydney harbour bridge...

CCC version is exactly the same procedure.
the older Radeon drivers up to 5.4 included a .txt file sorta readme. There is mentioned to uninstall first, but this file seems vanished in 5.5
Maybe they put it back in?

PS: I never have been to Sydney - do I miss something?

Ingmar Kalkman · May 23, 2005, 04:32 PM

Quote:

Originally Posted by Zorg

CCC version is exactly the same procedure.
the older Radeon drivers up to 5.4 included a .txt file sorta readme. There is mentioned to uninstall first, but this file seems vanished in 5.5
Maybe they put it back in?

PS: I never have been to Sydney - do I miss something?

Yeah, even a readme would be better than nothing.

Off Topic:
I only spend one day+evening in Sydney. Had a good time there. Lot's of things to do and see. Busy city centre. (I was on a one month trip on the east coast, from Cairns to Melbourne).
Now, how do we link Australia to the CCC so we keep the moderators away

jpinard · May 25, 2005, 01:12 AM

What do you mean there's no point to CCC. Isn't CAT AI enough reason?

UnTouchAble · May 25, 2005, 06:57 AM

Not really, you can change the AI with 3rd party applications, such as Ati Tray Tool, Radlinker etc. If you wanted to, you could always change it via Reg Editor.

jpinard · May 25, 2005, 05:44 PM

If ti's so easy t change, why doesn't the old cp have it? <confused>

NAZ2222 · May 26, 2005, 06:04 PM

I think that the old cp doesn't have it, because maybe AI need a constant program running and is not. But i dont how ATT use it, maybe it transfers that task for im self? can anyone put some light on this???

NAZ2222 · May 26, 2005, 06:09 PM

I have another question, i have an 9800 pro, dose it conpense to have ccc?? i heard some people complaining about load times, and on the relevance of having CCC to performance versus quality.t

Spyre · May 27, 2005, 01:23 AM

Quote:

Originally Posted by jpinard

If ti's so easy t change, why doesn't the old cp have it? <confused>

Because no more development work is being done on the old style CP

H3X4D3C1M4L · May 31, 2005, 05:18 PM

More responsive than the old ones...esp. with .NET 2.0 beta vs. 1.2

May 17, 2005, 02:29 PM	#1
*Zardon* enchanted Join Date: May 2002 Location: Driverheaven Posts: 32,260 Rep Power: 3150	Rate Catalyst 5.5 (CCC Only) You know the drill, vote !

May 17, 2005, 06:23 PM	#3
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Some Where in Ohio Posts: 6,348 Rep Power: 103 System Specs	So far np with it __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun"

May 18, 2005, 01:13 AM	#4
petri1 DriverHeaven Senior Member Join Date: Jul 2004 Posts: 780 Rep Power: 0	well i have noticed that it sometimes tend to freeze for a short time but not that it freeze altogether but still it si a bit jerky but then again i don´t use it so often and because i don´t know everything and every option like i do with the old cp so but ti works withou lock ups and so on so i guess it has been improved from time to time and gets better all the time so keep it up ATI __________________ [COLOR=#232d35] [COLOR=Red]Intel Core 2 Quad 9450@2,66GHZ PowerColor Ati Radeon HD4870 512mb Gigabyte GaE-X38 4GB Kingston Hyper X [/COLOR] [/COLOR]

May 18, 2005, 09:52 AM	#6
Poppi DH Admirer Join Date: Oct 2003 Posts: 253 Rep Power: 0	Voting right now would give these drivers a 1. However, I will withhold my ballot and wait a reasonable amount of time for someone to help me with my Trackmania Sunrise issue in the main 5.5 thread. Edit: Wrong thread. Will C and P to drivers poll. Mods. please feel free to delete this post. __________________ Last edited by Poppi; May 18, 2005 at 02:46 PM.

May 17, 2005, 04:17 PM	#2
INSTG8R DriverHeaven Senior Member Join Date: Dec 2004 Location: Canadian lost in Norway Posts: 555 Rep Power: 0	See no significant changes good or bad

May 18, 2005, 02:08 AM	#5
LDBlues DriverHeaven Junior Member Join Date: May 2004 Location: NC Posts: 48 Rep Power: 0	This time around....I get several errors while using the ccc. Not an improvement....and still their is no point in using it.

May 18, 2005, 06:44 PM	#7
Ricky1810 DriverHeaven Junior Member Join Date: Aug 2004 Posts: 24 Rep Power: 0	Is it offtopic to ask whats the advantage in CCC over the classic control panel?

May 20, 2005, 01:38 PM	#8
Ingmar Kalkman DriverHeaven Junior Member Join Date: Dec 2004 Posts: 20 Rep Power: 0	Some obversations about the 5.5 CCC. I hope ATI keeps improving it. - When installed over the 5.4 crash on the 3D viewer. Warning should be given that first CCC must be uninstalled. - starts slow (why so much internet traffic???) - some help index refers to wrong item (starting at "Video for Pre-Radeon(R) 9500 Series") - loses 3d full screen gamma settings when window mode or <ALT> <TAB> - wanted: option to automaticaly set highest refresh rate on resolution change - wanted: easier acces to resolution change. That's it for now.... Game on!

May 25, 2005, 01:12 AM	#13
jpinard DriverHeaven Addict Join Date: Jun 2003 Posts: 284 Rep Power: 0	What do you mean there's no point to CCC. Isn't CAT AI enough reason?

May 25, 2005, 06:57 AM	#14
UnTouchAble DriverHeaven Addict Join Date: Dec 2004 Location: S-O-T Posts: 348 Rep Power: 0	Not really, you can change the AI with 3rd party applications, such as Ati Tray Tool, Radlinker etc. If you wanted to, you could always change it via Reg Editor.

May 25, 2005, 05:44 PM	#15
jpinard DriverHeaven Addict Join Date: Jun 2003 Posts: 284 Rep Power: 0	If ti's so easy t change, why doesn't the old cp have it? <confused>

May 26, 2005, 06:04 PM	#16
NAZ2222 DriverHeaven Addict Join Date: May 2005 Location: Portugal Posts: 393 Rep Power: 0 System Specs	I think that the old cp doesn't have it, because maybe AI need a constant program running and is not. But i dont how ATT use it, maybe it transfers that task for im self? can anyone put some light on this???

May 26, 2005, 06:09 PM	#17
NAZ2222 DriverHeaven Addict Join Date: May 2005 Location: Portugal Posts: 393 Rep Power: 0 System Specs	I have another question, i have an 9800 pro, dose it conpense to have ccc?? i heard some people complaining about load times, and on the relevance of having CCC to performance versus quality.t

May 31, 2005, 05:18 PM	#19
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,818 Rep Power: 0	More responsive than the old ones...esp. with .NET 2.0 beta vs. 1.2