ezd96

Got the screen shot to work. What format should I save in and how to post it. i have no url for the image to insert? I will try the removal.

ChoGGi

jpgs fine, http://imageshack.us

__________________
specs
Common Problems and Fixes for your Radeon

ezd96

Did the removal>startup>shut down>installed card>startup and still won't load drivers? I guess I'm screwed? I guess I could reinstall the XP CD and see if that changes anything in the device manager.

Did the screen shot but what file format should I save as and how to post it here to see?

ezd

ChoGGi

see my last post for screenshot, i dont think you'll need to reinstall windows

__________________
specs
Common Problems and Fixes for your Radeon

ezd96

http://img166.imageshack.us/my.php?i...enshotnv5.jpg][IMG] opps!

ezd96

ezd96

ezd96

ChoGGi

does rightclicking on AMDXP2700 and selecting scan for hardware changes find your video card
you can also try control panel>add hardware

__________________
specs
Common Problems and Fixes for your Radeon

ezd96

Nope, still no card found.
control panel>add hardware>next-Yes, I have already connected the hradware>add new hardware device>selected from the list(display adapter)>all I get is Intel stuff.

rambo406

Dear Choggi,

i'm using radeon 9600 series , and i also installed lastest Omega driver
but i still having problem with AGP , i can change the AGP speed to 4X but after restart it just going back to off position


and also i go check dxdiag and i get this


my question is , how to enable my AGP back ? thanks

ChoGGi

@ezd96 not really sure whats wrong, do you have another video card you can try switching with to see how it works?

@rambo406 since you didnt mention it did you check for atiprbxx.exe?
and your running winxpsp2?
could you also check start>run>type in services.msc>look for ati smartgart or something it should be automatic and not running

__________________
specs
Common Problems and Fixes for your Radeon

ezd96

After I cleaned and made sure the oem files were gone I figured I had nothing to lose with install XP again. So I reloaded XP yesterday and after that install I went to the device manager again to look what would be listed and found some ATI drivers along with the Intel drivers. So then I went right to the 9.6 driver file I downloaded right from ATI and they finnally installed with no problem.

I really do appreciate the time you have spent with the post to help get these drivers loaded.

ezd

ChoGGi

i'm glad to try and help
pretty weird problem though

__________________
specs
Common Problems and Fixes for your Radeon

Dalrogad

Quote:
Originally Posted by bobbytomorow View Post
I keep getting the "detect new hardware wizard" on start-up and my card is not recognized in device manager. Any idea how to fix this?

I keep getting this same problem, and the WDM drivers fix from Omega's site did not help.

So, the main problems:
Card (Radeon 9500) is not recognized,
Omegadriver not working
Monitor not recognized and monitor driver not working or updateable (see below).

I got Omega's driver to install and work once tonight, miraculously, although I have no idea how it worked, because I didn't do anything different from what I am doing every time I try it now. I then uninstalled it because I was getting some bad video problems with garbled text and icons. I figured I'd try reinstalling, but now that doesn't work at all.

Now the bad part - I uninstalled my monitor driver (Dell 2007 FPW), thinking this might have gotten messed up some how, and I could reinstall it the same way I did last time I installed it. Wrong again. Now I have no monitor driver, and the properties button in the Monitor tab of display properties is greyed out, so I cannot manually reinstall or update the driver. Tried system restore (I made a restore point right before uninstalling the monitor driver) - wrong again. System restore says "system cannot be restored. Your computer's settings have not been changed" - does not provide explanation. That was the first time I ever tried using restore.

I used omega's driver a year ago on this system with this vid card with no problems (although last time I didnt use the soft-mod, and this time I am trying to). I loved the driver, it rules.

Suggestions for all of these matters would be much appreciated! Thanks!
P.S. - I have read this entire thread already....


Also, I posted this elsewhere, but then realized that that thread is dead, so I'm trying this one too,


Intel mobo
2 gig P4
1 gig RAM
Radeon 9500
Windows XP Pro
Extreme aversion to reformatting

Dalrogad

Quote:
Originally Posted by bobbytomorow View Post
I keep getting the "detect new hardware wizard" on start-up and my card is not recognized in device manager. Any idea how to fix this?

I keep getting this same problem, and the WDM drivers fix from Omega's site did not help.

So, the main problems:
Card (Radeon 9500) is not recognized,
Omegadriver not working
Monitor not recognized and monitor driver not working or updateable (see below).

I got Omega's driver to install and work once tonight, miraculously, although I have no idea how it worked, because I didn't do anything different from what I am doing every time I try it now. I then uninstalled it because I was getting some bad video problems with garbled text and icons. I figured I'd try reinstalling, but now that doesn't work at all.

Now the bad part - I uninstalled my monitor driver (Dell 2007 FPW), thinking this might have gotten messed up some how, and I could reinstall it the same way I did last time I installed it. Wrong again. Now I have no monitor driver, and the properties button in the Monitor tab of display properties is greyed out, so I cannot manually reinstall or update the driver. Tried system restore (I made a restore point right before uninstalling the monitor driver) - wrong again. System restore says "system cannot be restored. Your computer's settings have not been changed" - does not provide explanation. That was the first time I ever tried using restore.

I used omega's driver a year ago on this system with this vid card with no problems (although last time I didnt use the soft-mod, and this time I am trying to). I loved the driver, it rules.

Suggestions for all of these matters would be much appreciated! Thanks!


p.s. - I have read this entire thread.
Also - I posted this in another thread originally, but then realized that it is dead - so trying here. ty.

Intel mobo
2 gig P4
1 gig RAM
Radeon 9500
Windows XP Pro
Extreme aversion to reformatting

ChoGGi

you can use powerstrip to make an inf for your monitor
the WDM drivers are for vivo
what version of omegadrivers are you installing?
whats your device id (start>run>devmgmt.msc>display adapter(or unknown device)>properties>details>hardware id)

i disable restore its pretty useless

__________________
specs
Common Problems and Fixes for your Radeon

Dalrogad

DISPLAY\DELA019\5&34B7C264&5&10000084&01&00
Thats the id for the monitor, under monitors...

PCI\VEN_1002&DEV_4144&SUBSYS_2057148C&REV_00\4&365 60896&0&0008
Thats for the Radeon 9500, under Display adaptors
Also under display adaptors is appearing an unknown "video controller". The ID: PCI\VEN_1002&DEV_4164&SUBSYS_2056148C&REV_00\4&365 60896&0&0108


I am using the latest release of the Omegadriver for ATI, WIndows XP: rad_w2kxp_omega_38291.exe

To update where I am at now, I figured out how to install the Omega vid driver..... First, install it, restart, then install it again by using either the new hardware wizard, or by running the setup.exe in the driver. After installing the omega, the monitor became recognized and the correct driver shows as working normally despite not having reinstalled it. Of course I have been folowing the procedure described in the readme for the driver cleaner for doing/redoing all of this.

Most importantly, now, as before, I am having wierd garbled video paterns in game (Medieval 2), and to a much lesser degree, garbled text and icons on desktop. I have tried the soft mod swapper, but no video improvement (not sure if it is doing anything, since the original install where I selected those options did not work), and am unclear what setup of omega driver is actually installed and working (soft mod, 9700, 9800, or regular).

Never had these video problems with the older version of omega driver... but dont recall older versions having the soft mod, so Id like to try to make this work... Doesnt look too promising though. As for the monitor driver inf, I have powerstrip, I will check it out - thx.

Any suggestions?

My system again,
Win XP
intel mobo
P4 2 gig
1 gig RAM
Radeon 9500

ChoGGi

"Also under display adaptors is appearing an unknown "video controller". The ID: PCI\VEN_1002&DEV_4164"
thats the secondary display if you want to hook up two monitors or leave it disabled if you only use one
you can use UnknownDevices to find out unknown devices

looks like the inf has support for your card

as for the "wierd garbled video paterns" a screen shot would be nice, but you can try using different driver versions.
in the 2KXP_INF theres swpdrv\normal\ati2mtag.sys copy the sys file to 2KXP_INF to disable the softmod
download the softmod here here

__________________
specs
Common Problems and Fixes for your Radeon

Dalrogad

I used the soft mod swapper again, this time selecting the regular omega driver (which I thought I had already tried, but must be mistaken) and the garbled video pattern disappeared, and all appears to work normally.

This has me wondering if the 9500 that I have is a pro, and that is causing the video problem, and it just isn't saying pro in device mnger, etc....

Regarding this:

in the 2KXP_INF theres swpdrv\normal\ati2mtag.sys copy the sys file to 2KXP_INF to disable the softmod


Doesn't the soft mod swapper included in the omega driver do the same thing (it is in the start menu with all the radeon driver stuff...). As for downloading the soft mod - isnt that the same as the soft mod which is already a selectable option for the omegadriver? Are you suggesting that I may get better results if I use that version? Also, there are a few available downloads there - 2 of which seem to be identified as the same thing even though one is 800 KB and the other 56.6 MB. Which do I choose? And should I follow the usual uninstall and clean procedure for this install attempt?

If/when the vvideo garbling reappears, then I will provide screen

Thank you very much for the help!

ChoGGi

i use a different shell for windows and i disabled the startmenu part of it so i cant say i've ever used the soft mod swapper, might as well do it that way if you want.

the file you want from the softmod page is
Patched ati2mtag.sys
(9500 -> 9700 and 9800SE -> 9800)
(not the 64bit one)

i believe omega uses the files from there also. i was looking in the softmodded sys and noticed the credits are from the person doing the softmods from that website.
to install copy the modded sys to the 2KXP_INF folder then install the drivers how you normally do

__________________
specs
Common Problems and Fixes for your Radeon

Dalrogad

ok, I'm gonna give it a try. When/if I get the insane vid probs, screenshot will be forthcoming.

Regarding my question about whihc download - please excuse the ignorant question - I later noticed that the lower ones are for 64 bit...

EDIT: Another question..... when you say install the drivers how you normally do.... Do you mean launch right from the rad_w2kxp_omega_38291.exe driver installer, even though it is already installed..? Or should I install from the .inf in the driver directory with new hardware wizard (if that's even possible when the device is already recognized as not new hardware) or do you mean use the soft mod swapper....?

Dalrogad

The image can be found below.
I copied the .sys to the directory you indicated, then went ahead and tried the "soft mod swapper" and selected "force 9700". After restart, the vid problems returned as before... Again, there is a significant video problem outside of game also, but nowhere near as extreme and it looks different - the icons and text are garbled in certain places.

Am I using the correct install method?

http://i136.photobucket.com/albums/q...HEMADDNESS.jpg

brunopletsch

Hi
I have a problem with the ati 9600 pro and my motherboard with the chipset VIA
I saw in a forum that had a imcompatibility with the Ati and Via chipset
My motherboard is a a8v-x
The problem is that the computer freezes or reboot , or sometimes when the windows is loading the image does not appear and the monitor is like when it is on suspend mode the led color still orange...

I need help
Sorrry by the errors i´m a brazilian

ChoGGi

see if these make any difference
http://www.georgebreese.com/net/software/#PCI

if you do a clean install of windows and still get the problem then you might have some bad hardware (maybe cheap power supply or bad ram) do you have working parts you can swap with to test?

__________________
specs
Common Problems and Fixes for your Radeon