Radeon 9700pro and omega 2.2.43 question

john99 · Jun 12, 2003, 01:10 AM

I just downloaded the latest omega drivers (based on the cat3.4 drivers) and the install seemed to go fine, everything works smothly...HOWEVER... My question is "why does my card show up as 9500/9700"?
I used the "HACKED" drivers and thought it would go from 9700pro (which is what was shown before) to 9800. Am I right? Am I reading something wrong? In "display properties" my adapter is shown as 9500/9700 but it says that the chipset is 9800... And in device manager it is shown as 9500/9700 I thought at the very least it would/should show 9700/9800 otherwise things seem the same as before.
I followed the readme file and all installation instructions to the letter (I am new to Ommega drivers but by no means a newb to building a pc..) Please email me and let me know what I've done wrong or can do to remedy this. Thank you!! Again, otherwise things seem fine and I do like the other addins like the artifact checker... Another question would be, "can I manually update the drivers with the 9800 omega drivers?

Thanks!

Jbarboni@juno.com

Johnny Chimpo · Jun 12, 2003, 09:05 AM

I have the same thing here, adapter type 9700/9500 but chip type 9800.
I think thats normal.

And I'm not sure what you mean by

Quote:

"can I manually update the drivers with the 9800 omega drivers?

I thought that the drivers were for all 9x00 series cards.

sunrise · Jun 12, 2003, 09:40 AM

As long as it says chipset is 9800 it worked. If you want to do it to the original ATi Cat 3.4, I have a hacked file available at my site : http://sunrise.stolemy.tv

john99 · Jun 12, 2003, 10:50 AM

By manually update, I mean go to device manager, click update drivers in the display adapters tab then tell windows that I will locate the driver.. tell it have dist and point to the area where the omega drivers opened (C:\program files\radeon omega drivers is the default local) uncheck "show only compatable box" and then point to the 9800 or 9800 pro omega drivers and let them install.
This worked for me, the drivers seemed to run fine BUT using the omega drivers (any of them) with fast writes off and everything set to performance AND my card overclocked slightly (330/330 instead of 324/310) My 3dmark scores have actually dropped by a little more than 200points, Ive lost 17fps in the first bench alone... Is this because I am using a 9700pro, is a 9700pro with the origional drivers better than the 9800 omega tweak? Or is something wrong??
Thanks.

sunrise · Jun 12, 2003, 11:03 AM

Well Omega's are tweaked to improve quality, which would explain the performance loss.

john99 · Jun 12, 2003, 11:24 AM

But almost everyone else is showing performance increases... Also, woould things run better if I use the 9800 omega drivers?

Blazer · Jun 14, 2003, 04:32 PM

Quote:

Originally posted by john99
But almost everyone else is showing performance increases... Also, woould things run better if I use the 9800 omega drivers?

when you install the Omega Drivers, do a manual update for your gpu, under your device manager, and then your system should show that you have a R 9800 pro

john99 · Jun 15, 2003, 11:47 AM

Thanks Blazer,

john99 · Jun 15, 2003, 11:49 AM

Whoops, I didn't mean to end there..LOL I did the manual update and my 3dmark scores jumped by over 300 points without overclocking anything!

Jun 12, 2003, 01:10 AM	#1
john99 DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	Radeon 9700pro and omega 2.2.43 question I just downloaded the latest omega drivers (based on the cat3.4 drivers) and the install seemed to go fine, everything works smothly...HOWEVER... My question is "why does my card show up as 9500/9700"? I used the "HACKED" drivers and thought it would go from 9700pro (which is what was shown before) to 9800. Am I right? Am I reading something wrong? In "display properties" my adapter is shown as 9500/9700 but it says that the chipset is 9800... And in device manager it is shown as 9500/9700 I thought at the very least it would/should show 9700/9800 otherwise things seem the same as before. I followed the readme file and all installation instructions to the letter (I am new to Ommega drivers but by no means a newb to building a pc..) Please email me and let me know what I've done wrong or can do to remedy this. Thank you!! Again, otherwise things seem fine and I do like the other addins like the artifact checker... Another question would be, "can I manually update the drivers with the 9800 omega drivers? Thanks! Jbarboni@juno.com Last edited by john99; Jun 12, 2003 at 01:27 AM.

Jun 12, 2003, 09:40 AM	#3
sunrise DriverHeaven Junior Member Join Date: May 2003 Posts: 54 Rep Power: 0	As long as it says chipset is 9800 it worked. If you want to do it to the original ATi Cat 3.4, I have a hacked file available at my site : http://sunrise.stolemy.tv

Jun 12, 2003, 10:50 AM	#4
john99 DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	By manually update, I mean go to device manager, click update drivers in the display adapters tab then tell windows that I will locate the driver.. tell it have dist and point to the area where the omega drivers opened (C:\program files\radeon omega drivers is the default local) uncheck "show only compatable box" and then point to the 9800 or 9800 pro omega drivers and let them install. This worked for me, the drivers seemed to run fine BUT using the omega drivers (any of them) with fast writes off and everything set to performance AND my card overclocked slightly (330/330 instead of 324/310) My 3dmark scores have actually dropped by a little more than 200points, Ive lost 17fps in the first bench alone... Is this because I am using a 9700pro, is a 9700pro with the origional drivers better than the 9800 omega tweak? Or is something wrong?? Thanks.

Jun 12, 2003, 11:03 AM	#5
sunrise DriverHeaven Junior Member Join Date: May 2003 Posts: 54 Rep Power: 0	Well Omega's are tweaked to improve quality, which would explain the performance loss.

Jun 12, 2003, 11:24 AM	#6
john99 DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	But almost everyone else is showing performance increases... Also, woould things run better if I use the 9800 omega drivers?

Jun 15, 2003, 11:47 AM	#8
john99 DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	Thanks Blazer,

Jun 15, 2003, 11:49 AM	#9
john99 DriverHeaven Newbie Join Date: Jun 2003 Posts: 5 Rep Power: 0	Whoops, I didn't mean to end there..LOL I did the manual update and my 3dmark scores jumped by over 300 points without overclocking anything!