Radeon Omega Drivers v4.8.442 for Windows XP/2k

***Omegadrive*** · Jan 18, 2008, 02:35 AM

Quote:

Originally Posted by speedyg869

While installing the ATI Omega v4.8.442 drivers for 2K/XP, I encountered a few program errors. One was trying to load a registry entry, but failed. Is there a log file?
I went back and copied down the messages:
Drivers installed: Would you like to see a shortcut for the ATT CP on the desktop? No
Registry editor: Cannot import C:\Program: Error opening the file. There may be a disk or FS problem.
Registry editor: Cannot import Files\Radeon: Error opening the file. There may be a disk or FS problem.
Registry editor: Cannot import Omega: Error opening the file. There may be a disk or FS problem.
Registry editor: Cannot import Drivers\\ATT_Prof.reg: Error opening the file. There may be a disk or FS problem.
Disable OC on ATT? Yes
Would you like to see a shortcut for the ATI TT on the desktop? No
Installation successful.
System specs:
W2K / Athlon XP 2400 / 1GB Kingston PC133 CAS2 / ATI Radeon 9800XT / MSI Turbo2 MS-6330 / Enemax 450 PSU

Also, Do you do anything special to make your drivers run on W2K? Or should I be able to use the latest official ATI drivers?

Thanks in advance.

Is an error with Windows 2k, can't seem to import long file names on registry files, but don't worry, that is just the ATT profiles, you can run the file from the start menu to get them after the install.

speedyg869 · Jan 18, 2008, 01:07 PM

Quote:

Originally Posted by Omegadrive

Is an error with Windows 2k, can't seem to import long file names on registry files, but don't worry, that is just the ATT profiles, you can run the file from the start menu to get them after the install.

Understood.
Do you do anything special to make your drivers run on W2K? Or should I be able to use the latest official ATI drivers? Because ATI doesn't show W2K supported since ver 6.2.

Thanks!

kn00tcn · Jan 18, 2008, 11:25 PM

i have 7.12 (or was it 7.10 & been meaning to put 7.12) on my 2k

i had to manually import the reg keys during install, 2k in certain situations doesnt read spaces in folder names

no issues at all when manually importing (at the correct time of the installer)

& there was something more than just att profiles

speedyg869 · Jan 19, 2008, 04:33 PM

Quote:

Originally Posted by kn00tcn

i have 7.12 (or was it 7.10 & been meaning to put 7.12) on my 2k
i had to manually import the reg keys during install, 2k in certain situations doesnt read spaces in folder names
no issues at all when manually importing (at the correct time of the installer)
& there was something more than just att profiles

Great! Thanks

FlyByU · Jan 20, 2008, 03:51 AM

Hi Omegadrive,

Will your 8.1 based drivers have the AGP hotfix included in it or will we still have to use the ATI hotfix as well?

thefallinghole · Jan 22, 2008, 04:06 PM

I just got my sapphire x2600 512 agp card yesterday (upgraded from a 9800 pro) I installed the omega drivers in my computer using agp of course and when I attempted to play crysis I was getting 2FPS which is 28 FPS worse than my 9800 pro (this of course makes no sense) I then uninstalled all drivers on my computer and reinstalled the omega driver (which btw worked amazingly on my 9800 pro). My question is, is there anything I can do to get the Omega drivers to work properly because I know I'll probably get another 5-10 fps outta it. Any suggestions would be great.

-Dan

Seenu · Jan 25, 2008, 02:55 PM

Hi all -

I tried the 8.1 hotfix drivers but my frame rate in World Of Warcraft went way down. So I uninstalled and ran driver cleaner and installed the Omega 7.12 and frame rates are now good.

QUESTION

On my secondary box I have an Athlon 3200 with a Radeon x800xl. I am using the Omega 7.2 now. What driver is best with an x800 xl - as some driver sets maybe tuned for newer cards (but I am not sure that is why I am asking). I use that box for World Of Warcraft for my kids.

Thanks so much.

lurkingdevil · Feb 1, 2008, 09:04 AM

ok this has happened first time to me and is totally wierd....

I had reinstalled windows xp so i was going along installing all the drivers, I downloaded the new 4.8.442 drivers and installed them, everythings fine. Now I start device manager and I find that i have a X1050 video adapter listed when i have a 9550 card

Heres a screenshot of windows security warning, it says omega 3.8.442 but i am installing 4.8.442

Earlier before reinstalling windows i was running the older version of omega drivers and it identified my card fine.
I am totally sure i have a 9550

***Omegadrive*** · Feb 1, 2008, 04:07 PM

Quote:

Originally Posted by lurkingdevil

ok this has happened first time to me and is totally wierd....

I had reinstalled windows xp so i was going along installing all the drivers, I downloaded the new 4.8.442 drivers and installed them, everythings fine. Now I start device manager and I find that i have a X1050 video adapter listed when i have a 9550 card

Heres a screenshot of windows security warning, it says omega 3.8.442 but i am installing 4.8.442

Earlier before reinstalling windows i was running the older version of omega drivers and it identified my card fine.
I am totally sure i have a 9550

*ahem* see readme *ahem*

lurkingdevil · Feb 4, 2008, 03:46 AM

will do

lurkingdevil · Feb 4, 2008, 03:50 AM

ok it reads -
For example some 9600 cards are now identified as x1050, etc.

so 9550s are x1050 too?
And i cant apply the softmod on this one can i?

***Omegadrive*** · Feb 4, 2008, 04:20 PM

Quote:

Originally Posted by lurkingdevil

ok it reads -
For example some 9600 cards are now identified as x1050, etc.

so 9550s are x1050 too?
And i cant apply the softmod on this one can i?

Yep, and you can use the soft mod like before, the name doesn't change the capabilities.

Katonka · Feb 16, 2008, 08:05 AM

My MSI RX1650 PRO-TD256EZ is still not running correctly with these drivers. Since 7.3 none of the released drivers can display the login screen. After WinXP splash there is a background with green vertical lines and the mouse pointer for 20 sec, then my TFT looses the signal. So the change of resolution from VGA crashes sth. Boot Option VGA and back to 7.3 is my only solution for now.
Asus P5B, 2Gb, Core2 6300.
If anyone knows sth or wants more SysInfos, PM me plz.

lobuni · Feb 21, 2008, 02:01 PM

I installed the latest omegas (3.8.442). Now i get random lock-ups when booting. It happens just when the windows booting screen (scrolling bar) is about to fade in. the dark static boot-screen is barely visible. i usually hit reset and reboot. Can it be a driver problem?

x800 pro. win xp.

edit: hmm... i reinstalled the old drivers (360) and immediately on the next reboot i got the same black screen. i guess its time to reinstall windows.

theotterofdoom · Feb 24, 2008, 05:26 PM

Hey so nice job with the drivers, I've always used them in the past without a problem, but when i installed the latest ones recently my sound entirely stopped working. No matter what I did I ended up having to uninstall them and install the regular ATI drivers - no luck, still doesn't work. Is this a common problem, and if it is how would I be able to fix it?

Win XP, ati mobility radeon x1400

thanks

kn00tcn · Feb 25, 2008, 10:22 PM

check the chipset drivers

theotterofdoom · Feb 27, 2008, 03:21 PM

Ok I went and installed the newest chipset drivers, I had done it from dell's website before but this time I installed it from the intel website

now should i uninstall/reinstall the ati drivers or uninstall that and put in the omega drivers? do you think this would fix the problem?

thanks

kn00tcn · Feb 27, 2008, 11:22 PM

wait, so does sound reappear once ati drivers are uninstalled?

& did the intel chipset drivers fix the sound?

install gfx drivers after chipset is installed

ShadyGame · Feb 29, 2008, 01:54 PM

Ok..Installed omega drivers and now Gta San Andreas runs slow?
Any suggestions?

stevodevo · Mar 6, 2008, 10:53 AM

Quick question - I've skimmed through this thread so maybe I missed it. Do the latest Omega Drivers include the supposed ATI 'hotfix' for Crysis that was released with cat 7.11? I probably don't know what I'm talking about as I've just begun playing Crysis and noticed it is quite choppy on my x1950 pro (pci-e).

Any suggestions for improving gameplay on Crysis with this gfx card and the latest Omega drivers?

Also kudos for great work - I've been using Omega drivers for years since I had my 9800 pro. They're awesome!

eaa315 · Mar 7, 2008, 06:21 PM

7.12
lol

pug · Mar 17, 2008, 07:18 PM

I am sorry, but no matter what I do I am unable to get opengl to work.

IBM T60p, ATI Mobility FireGL V5200 (256 MB) graphics adapter.

I get a variety of error messages ranging from no opengl found, to the best one I have seen yet:

"failed to find an appropriate PIXELFORMAT"

Whatever that means!

I have tried removing ATT, I have tried installing a previous version of the omegadrivers (3.8.421) which I believe should have better opengl support.

I am at a total loss. Besides thinking ATI makes utter crap and I'll never buy stuff with an ATI graphics card again (oh boy... I hope Lenovo have switched to Nvidia... *sighs*) what on earth can I do?

HELP!

kn00tcn · Mar 17, 2008, 08:53 PM

yes, judge an entire company based off the mobile firegl line....

what about ibm's drivers? or omegas before cat 7.1?

directx is fine? specific apps give specific errors?

pug · Mar 19, 2008, 09:16 AM

Quote:

Originally Posted by kn00tcn

yes, judge an entire company based off the mobile firegl line....

what about ibm's drivers? or omegas before cat 7.1?

directx is fine? specific apps give specific errors?

I've heard bad things about ATI and opengl, doesn't matter if its the mobile line or not.

IBMs/Lenovos drivers works... to a degree, they mess up whenever I move my laptop from docking station to docking station... which I do quite often.

Same problem with the Omega drivers before cat 7.1 doesn't work well and keep messing up my display (especially when switching between 1400x1050, 1600x1200 and 1920x1200)

DirectX is fine (I can play for example Neverwinter nights 1+2 without any problems).

App (games) examples that doesn't work:

ioquake3, openarena, Urbanterror and action quake 2 (all free downloads so everyone can test)

I'm still slightly annoyed at not being able to get my game fix heh. Hopefully a new instance of omegadrivers comes out soon...

Any ideas for a solution (or someone with the same laptop for example!) are welcome! :-)

slogol · Mar 19, 2008, 07:16 PM

Hi,

quick question ... have these drivers been tested also on Win 2000 for HD3850?
Driver installation completes with no errors but Win 2000 does not recognize the driver after reboot.

If I go to Device Manager, I see an error for the HD3850 card and if I try to update the driver I get error "Parameter is not correct".

Any idea what could be the cause of this problem?

Many thanks in advance for any help provided !!!

Cheers,

HighNoon · Apr 1, 2008, 08:36 PM

I have recently installed the latest Omega's onto my 9800PRO AGP.

Does anyone know how to get the Really Slick OpenGL screensaver to work?

I'm running dual monitors, and if the screensaver shows at all I have about a 1/2" vertical band of distortion on the far left side of the screen.

The Really Slick site mentions making sure VSync is enabled. I use the tray tools to make sure VSync is always on, and still no luck.

I tried an older version of one of the screensavers and it actually runs perfect - on one monitor only.

Any suggestions are greatly appreciated, I really want to have this screensaver working.

Thanks!

-

F0x123 · Apr 14, 2008, 08:26 PM

How can I activate 768*576 resolution for my TV Out?

I tried to add this resolution using refresh force. But it doesn't show up.

x800xl

cox · Apr 18, 2008, 10:46 AM

is omega "dead"? hehe
he has said nothing for quite long about new Drivers...

bernynhel · Apr 23, 2008, 07:02 PM

YES! I don't know and I've got Omega open in another tab at that option cuz I've uninstalled the ATI driver from AMD for my 9600Pro/256 card as I was having some issues, cleaned w/ Driver Cleaner and am in driver limbo cuz I don't know what a "mirror" is or how to pick one! Laughing, clowning, poking fun while replying OK.

MrX · May 9, 2008, 05:17 PM

I'm having some trouble with the Omega driver for the Radeon cards. I've gone through the forum and not found any solutions that work (though I likely have missed something).
Here is my problem: When I install the Omega drivers, Direct3D is disabled and no applications that use it will function, including the D3D test in DXDiagnostic. I uninstalled the ATI trivers before installation, reinstalled the Mobo AGP drivers after installation, and tried to turn AGP read/write functionality from the Advanced SmartGart window. Any help would be appreciated.

System Specs:
Soyo SY-K7VME Mobo
AMD Sempron 2500+, 1.7 ghz
ATI Radeon 9200, 128 MB
1 gig Ram
DirectX 9.0c
Windows XP Pro, SP2

Jan 18, 2008, 11:25 PM	#93
kn00tcn DriverHeaven Senior Member Join Date: Jun 2006 Location: Toronto Posts: 649 Rep Power: 0 System Specs	i have 7.12 (or was it 7.10 & been meaning to put 7.12) on my 2k i had to manually import the reg keys during install, 2k in certain situations doesnt read spaces in folder names no issues at all when manually importing (at the correct time of the installer) & there was something more than just att profiles __________________ PM me if i dissappear from helping you in a thread XP - Athlon XP-M (Barton @ 2.4ghz) \| 2x1024 Mushkin ddr400 DC \| x800XT-PE + Zalman VF700-CU \| Abit AN7 \| Seasonic S12 E+ 550w 2K - Pentium4 (Northwood @ 2.3ghz) \| 2x512 OCZ \| 9800pro + Iceberq5 \| Asus P4S333-VM \| 300w (~20A) generic

Jan 22, 2008, 04:06 PM	#96
thefallinghole DriverHeaven Newbie Join Date: Jan 2008 Posts: 1 Rep Power: 0	X2600 512 Agp I just got my sapphire x2600 512 agp card yesterday (upgraded from a 9800 pro) I installed the omega drivers in my computer using agp of course and when I attempted to play crysis I was getting 2FPS which is 28 FPS worse than my 9800 pro (this of course makes no sense) I then uninstalled all drivers on my computer and reinstalled the omega driver (which btw worked amazingly on my 9800 pro). My question is, is there anything I can do to get the Omega drivers to work properly because I know I'll probably get another 5-10 fps outta it. Any suggestions would be great. -Dan

Jan 25, 2008, 02:55 PM	#97
Seenu DriverHeaven Newbie Join Date: Jan 2008 Posts: 4 Rep Power: 0	Hi all - I tried the 8.1 hotfix drivers but my frame rate in World Of Warcraft went way down. So I uninstalled and ran driver cleaner and installed the Omega 7.12 and frame rates are now good. QUESTION On my secondary box I have an Athlon 3200 with a Radeon x800xl. I am using the Omega 7.2 now. What driver is best with an x800 xl - as some driver sets maybe tuned for newer cards (but I am not sure that is why I am asking). I use that box for World Of Warcraft for my kids. Thanks so much. __________________ Epox NForce3-250 Chipset Mainboard (socket 939) AthlonX2 4200 @2604 - 248 FSB @HT4 3GB DDR400 memory Radeon 1950pro AGP (Visiontek) Audigy2 Platinum Antec 650 PSU

Feb 1, 2008, 09:04 AM	#98
lurkingdevil DriverHeaven Newbie Join Date: Feb 2008 Posts: 4 Rep Power: 0	ok this has happened first time to me and is totally wierd.... I had reinstalled windows xp so i was going along installing all the drivers, I downloaded the new 4.8.442 drivers and installed them, everythings fine. Now I start device manager and I find that i have a X1050 video adapter listed when i have a 9550 card Heres a screenshot of windows security warning, it says omega 3.8.442 but i am installing 4.8.442 Earlier before reinstalling windows i was running the older version of omega drivers and it identified my card fine. I am totally sure i have a 9550 Last edited by lurkingdevil; Feb 1, 2008 at 09:48 AM.

Feb 21, 2008, 02:01 PM	#104
lobuni DriverHeaven Newbie Join Date: Feb 2008 Posts: 1 Rep Power: 0 System Specs	I installed the latest omegas (3.8.442). Now i get random lock-ups when booting. It happens just when the windows booting screen (scrolling bar) is about to fade in. the dark static boot-screen is barely visible. i usually hit reset and reboot. Can it be a driver problem? x800 pro. win xp. edit: hmm... i reinstalled the old drivers (360) and immediately on the next reboot i got the same black screen. i guess its time to reinstall windows. Last edited by lobuni; Feb 25, 2008 at 11:02 AM. Reason: new info

Jan 20, 2008, 03:51 AM	#95
FlyByU DriverHeaven Newbie Join Date: Jul 2006 Location: Indiana, U.S.A. Posts: 17 Rep Power: 0	Hi Omegadrive, Will your 8.1 based drivers have the AGP hotfix included in it or will we still have to use the ATI hotfix as well?

Feb 4, 2008, 03:46 AM	#100
lurkingdevil DriverHeaven Newbie Join Date: Feb 2008 Posts: 4 Rep Power: 0	will do

Feb 4, 2008, 03:50 AM	#101
lurkingdevil DriverHeaven Newbie Join Date: Feb 2008 Posts: 4 Rep Power: 0	ok it reads - For example some 9600 cards are now identified as x1050, etc. so 9550s are x1050 too? And i cant apply the softmod on this one can i?

Feb 16, 2008, 08:05 AM	#103
Katonka DriverHeaven Newbie Join Date: Nov 2007 Posts: 3 Rep Power: 0	My MSI RX1650 PRO-TD256EZ is still not running correctly with these drivers. Since 7.3 none of the released drivers can display the login screen. After WinXP splash there is a background with green vertical lines and the mouse pointer for 20 sec, then my TFT looses the signal. So the change of resolution from VGA crashes sth. Boot Option VGA and back to 7.3 is my only solution for now. Asus P5B, 2Gb, Core2 6300. If anyone knows sth or wants more SysInfos, PM me plz.

Feb 24, 2008, 05:26 PM	#105
theotterofdoom DriverHeaven Newbie Join Date: Feb 2008 Posts: 2 Rep Power: 0 System Specs	Sound disappeared Hey so nice job with the drivers, I've always used them in the past without a problem, but when i installed the latest ones recently my sound entirely stopped working. No matter what I did I ended up having to uninstall them and install the regular ATI drivers - no luck, still doesn't work. Is this a common problem, and if it is how would I be able to fix it? Win XP, ati mobility radeon x1400 thanks

Feb 25, 2008, 10:22 PM	#106
kn00tcn DriverHeaven Senior Member Join Date: Jun 2006 Location: Toronto Posts: 649 Rep Power: 0 System Specs	check the chipset drivers __________________ PM me if i dissappear from helping you in a thread XP - Athlon XP-M (Barton @ 2.4ghz) \| 2x1024 Mushkin ddr400 DC \| x800XT-PE + Zalman VF700-CU \| Abit AN7 \| Seasonic S12 E+ 550w 2K - Pentium4 (Northwood @ 2.3ghz) \| 2x512 OCZ \| 9800pro + Iceberq5 \| Asus P4S333-VM \| 300w (~20A) generic

Feb 27, 2008, 03:21 PM	#107
theotterofdoom DriverHeaven Newbie Join Date: Feb 2008 Posts: 2 Rep Power: 0 System Specs	Ok I went and installed the newest chipset drivers, I had done it from dell's website before but this time I installed it from the intel website now should i uninstall/reinstall the ati drivers or uninstall that and put in the omega drivers? do you think this would fix the problem? thanks

Feb 27, 2008, 11:22 PM	#108
kn00tcn DriverHeaven Senior Member Join Date: Jun 2006 Location: Toronto Posts: 649 Rep Power: 0 System Specs	wait, so does sound reappear once ati drivers are uninstalled? & did the intel chipset drivers fix the sound? install gfx drivers after chipset is installed __________________ PM me if i dissappear from helping you in a thread XP - Athlon XP-M (Barton @ 2.4ghz) \| 2x1024 Mushkin ddr400 DC \| x800XT-PE + Zalman VF700-CU \| Abit AN7 \| Seasonic S12 E+ 550w 2K - Pentium4 (Northwood @ 2.3ghz) \| 2x512 OCZ \| 9800pro + Iceberq5 \| Asus P4S333-VM \| 300w (~20A) generic

Feb 29, 2008, 01:54 PM	#109
ShadyGame DriverHeaven Newbie Join Date: Jan 2008 Posts: 15 Rep Power: 0	Ok..Installed omega drivers and now Gta San Andreas runs slow? Any suggestions?

Mar 6, 2008, 10:53 AM	#110
stevodevo DriverHeaven Newbie Join Date: Mar 2008 Location: USA Posts: 1 Rep Power: 0 System Specs	Quick question - I've skimmed through this thread so maybe I missed it. Do the latest Omega Drivers include the supposed ATI 'hotfix' for Crysis that was released with cat 7.11? I probably don't know what I'm talking about as I've just begun playing Crysis and noticed it is quite choppy on my x1950 pro (pci-e). Any suggestions for improving gameplay on Crysis with this gfx card and the latest Omega drivers? Also kudos for great work - I've been using Omega drivers for years since I had my 9800 pro. They're awesome!

Mar 7, 2008, 06:21 PM	#111
eaa315 DriverHeaven Newbie Join Date: Nov 2004 Posts: 11 Rep Power: 0 System Specs	7.12 lol

Mar 17, 2008, 07:18 PM	#112
pug DriverHeaven Newbie Join Date: Mar 2008 Posts: 2 Rep Power: 0	I am sorry, but no matter what I do I am unable to get opengl to work. IBM T60p, ATI Mobility FireGL V5200 (256 MB) graphics adapter. I get a variety of error messages ranging from no opengl found, to the best one I have seen yet: "failed to find an appropriate PIXELFORMAT" Whatever that means! I have tried removing ATT, I have tried installing a previous version of the omegadrivers (3.8.421) which I believe should have better opengl support. I am at a total loss. Besides thinking ATI makes utter crap and I'll never buy stuff with an ATI graphics card again (oh boy... I hope Lenovo have switched to Nvidia... sighs) what on earth can I do? HELP!

Mar 17, 2008, 08:53 PM	#113
kn00tcn DriverHeaven Senior Member Join Date: Jun 2006 Location: Toronto Posts: 649 Rep Power: 0 System Specs	yes, judge an entire company based off the mobile firegl line.... what about ibm's drivers? or omegas before cat 7.1? directx is fine? specific apps give specific errors? __________________ PM me if i dissappear from helping you in a thread XP - Athlon XP-M (Barton @ 2.4ghz) \| 2x1024 Mushkin ddr400 DC \| x800XT-PE + Zalman VF700-CU \| Abit AN7 \| Seasonic S12 E+ 550w 2K - Pentium4 (Northwood @ 2.3ghz) \| 2x512 OCZ \| 9800pro + Iceberq5 \| Asus P4S333-VM \| 300w (~20A) generic

Mar 19, 2008, 07:16 PM	#115
slogol DriverHeaven Newbie Join Date: Mar 2008 Posts: 6 Rep Power: 0	Hi, quick question ... have these drivers been tested also on Win 2000 for HD3850? Driver installation completes with no errors but Win 2000 does not recognize the driver after reboot. If I go to Device Manager, I see an error for the HD3850 card and if I try to update the driver I get error "Parameter is not correct". Any idea what could be the cause of this problem? Many thanks in advance for any help provided !!! Cheers,

Apr 1, 2008, 08:36 PM	#116
HighNoon DriverHeaven Newbie Join Date: Apr 2008 Posts: 1 Rep Power: 0	I have recently installed the latest Omega's onto my 9800PRO AGP. Does anyone know how to get the Really Slick OpenGL screensaver to work? I'm running dual monitors, and if the screensaver shows at all I have about a 1/2" vertical band of distortion on the far left side of the screen. The Really Slick site mentions making sure VSync is enabled. I use the tray tools to make sure VSync is always on, and still no luck. I tried an older version of one of the screensavers and it actually runs perfect - on one monitor only. Any suggestions are greatly appreciated, I really want to have this screensaver working. Thanks! -

Apr 14, 2008, 08:26 PM	#117
F0x123 DriverHeaven Newbie Join Date: Jan 2005 Posts: 12 Rep Power: 0	How can I activate 768*576 resolution for my TV Out? I tried to add this resolution using refresh force. But it doesn't show up. x800xl

Apr 18, 2008, 10:46 AM	#118
cox DriverHeaven Lover Join Date: Jul 2003 Posts: 119 Rep Power: 0	is omega "dead"? hehe he has said nothing for quite long about new Drivers...

Apr 23, 2008, 07:02 PM	#119
bernynhel DriverHeaven Newbie Join Date: Apr 2008 Posts: 2 Rep Power: 0	What does "Select a Mirror for Downloading" Mean??? YES! I don't know and I've got Omega open in another tab at that option cuz I've uninstalled the ATI driver from AMD for my 9600Pro/256 card as I was having some issues, cleaned w/ Driver Cleaner and am in driver limbo cuz I don't know what a "mirror" is or how to pick one! Laughing, clowning, poking fun while replying OK.

May 9, 2008, 05:17 PM	#120
MrX DriverHeaven Newbie Join Date: May 2008 Posts: 7 Rep Power: 0	I'm having some trouble with the Omega driver for the Radeon cards. I've gone through the forum and not found any solutions that work (though I likely have missed something). Here is my problem: When I install the Omega drivers, Direct3D is disabled and no applications that use it will function, including the D3D test in DXDiagnostic. I uninstalled the ATI trivers before installation, reinstalled the Mobo AGP drivers after installation, and tried to turn AGP read/write functionality from the Advanced SmartGart window. Any help would be appreciated. System Specs: Soyo SY-K7VME Mobo AMD Sempron 2500+, 1.7 ghz ATI Radeon 9200, 128 MB 1 gig Ram DirectX 9.0c Windows XP Pro, SP2

LinkBacks (?) LinkBack to this Thread: http://www.driverheaven.net/windows-xp-2k-radeon-display-drivers/152136-radeon-omega-drivers-v4-8-442-windows-xp-2k.html
Posted By	For	Type	Date
drivers radeon hd 2600 pro (omega 3.8.442)download \| VIRGILIO Ricerca \| Web	This thread	Refback	Oct 1, 2009 06:48 PM
3dfusion.de - Sites Linking in - from Alexa	This thread	Refback	Sep 3, 2009 04:34 PM
download ATI drivers radeon hd 2600 pro (omega 3.8.442) \| VIRGILIO Ricerca \| Web	This thread	Refback	Jul 4, 2009 08:22 AM
drivers radeon hd 2600 pro (omega 3.8.442)download \| VIRGILIO Ricerca \| Web	This thread	Refback	Jun 7, 2009 09:51 AM
download drivers radeon hd 2600 pro (omega 3.8.442) \| VIRGILIO Ricerca \| Web	This thread	Refback	Jun 6, 2009 10:01 PM
drivers radeon hd2600 pro (omega 3.8.442)download \| VIRGILIO Ricerca \| Web	This thread	Refback	May 14, 2009 07:50 AM
a NEW problem. video card hijinx - SUBSIM Radio Room Forums	This thread	Refback	Mar 7, 2009 05:26 PM
Omega Drivers v4.8.442 (v7.12) - 3DFusion	This thread	Refback	Mar 6, 2009 03:30 PM
driver pci/ven_1002 \| VIRGILIO Ricerca \| Web	This thread	Refback	Nov 6, 2008 01:00 PM
AMD / ATI julkaisi Catalyst 7.12 ajurit ? MuroBBS ? Plaza	This thread	Refback	Oct 27, 2008 05:59 PM
Windows XP/2K Radeon Display Drivers on DriverHeaven.net \| BoardReader	This thread	Refback	Sep 6, 2008 02:12 PM
Moteur de recherche lo.st : Infos, Photos, Videos	This thread	Refback	Aug 6, 2008 06:58 AM
Omega Drivers v4.8.442 (v7.12) - 3DFusion	This thread	Refback	Jul 25, 2008 02:36 AM
Omega drivers - forums post summary \| BoardReader	This thread	Refback	Jul 23, 2008 04:28 PM
Usciti gli Omega 7.12 (4.8.442)!!!!! - Hardware Upgrade Forum	Post #0	Refback	Jun 7, 2008 05:50 AM