problem with omega, via4in1, dx tex.accel flashed9500pro to 9700

rayback · Mar 22, 2007, 05:04 AM

hi
i have a quite big problem
it's like this after a fresh windows install i run via 4in1 drivers 4.43 an install evry thing the pc restarts , then i install the radeon drivers (omega) the pc restarts bot it hangs after login in

bot the main problem is that in dxdiag i have texture acceleration disabled

i searched the internet ,bot all the help i found was to reinstal the via 4in1 then install the drivers
i tryed runnig the 4in1 pack in windows 2k compatibillity mode ... that didient worked either

i also changed the bios in my 9500Pro to 9700

update:
and the agp works in pci mode...
in SMARTGART i have all the pci on and all the agp off
sory for my eng and please help
iv'e set the abbility for the agp to write/read in bios bot that diden't work

also should i use the 9700 softmod files?

thx for any help and sory for my english

Dyre Straits · Mar 22, 2007, 05:44 AM

Quote:

Originally Posted by rayback

hi
i have a quite big problem
it's like this after a fresh windows install i run via 4in1 drivers 4.43 an install evry thing the pc restarts , then i install the radeon drivers (omega) the pc restarts bot it hangs after login in

bot the main problem is that in dxdiag i have texture acceleration disabled

i searched the internet ,bot all the help i found was to reinstal the via 4in1 then install the drivers
i tryed runnig the 4in1 pack in windows 2k compatibillity mode ... that didient worked either

i also changed the bios in my 9500Pro to 9700

update:
and the agp works in pci mode...
in SMARTGART i have all the pci on and all the agp off
sory for my eng and please help
iv'e set the abbility for the agp to write/read in bios bot that diden't work

also should i use the 9700 softmod files?

thx for any help and sory for my english

Greetings!

I really wish I could be of help to you. BUT, over the years I've had so many issues with VIA-based systems that I no longer will even consider purchasing one that has VIA in it. I'm really not knocking VIA, per se, but, the trouble I've had with VIA and ATI cards has just been too much of a pain to deal with.

I would say, however, if you've flashed your card to 9700, you should then use the 9700 soft mod drivers. That's just a hunch, though, since I don't do modding of my video cards.

(BTW, there's no need to apologize for your English, I can understand you just fine.

)

rayback · Mar 22, 2007, 05:53 AM

jupi!
i've got an error in the Event Log

"You are running different builds of the miniport and display driver. Please use a matched pair."

Dyre Straits · Mar 22, 2007, 05:26 PM

Quote:

Originally Posted by rayback

jupi!
i've got an error in the Event Log

"You are running different builds of the miniport and display driver. Please use a matched pair."

This may be what you're looking for:

http://www.driverheaven.net/windows-...bit-issue.html

There's a lot of discussion in that thread and addresses the error issue you posted.

Good luck!

rayback · Mar 23, 2007, 04:12 AM

it dident work

Dyre Straits · Mar 23, 2007, 04:28 AM

Quote:

Originally Posted by rayback

it dident work

I hope someone can help you. Like I said at the first, I've had too many problems with VIA-based systems to even consider them anymore for myself. Problems just like you're having caused me to quit trying and just take the motherboard back and get one that doesn't have a VIA chipset.

Good luck, though.

rayback · Mar 23, 2007, 08:51 AM

.... i spend about 18 h on this (with brakes ofcourse ;])

im getting....

;/ SOMEONE!