Modded drivers for Mobility and IGP

ToshiroOC · Feb 13, 2003, 06:16 PM

Server at http://toshirooc.elitegaming.net/ati31allradeon.zip is working fine

patje · Feb 13, 2003, 06:29 PM

Quote:

Originally posted by MoinMan
I'm very interested in this modded driver but it seems the server is down.

just checked, its online

patje · Feb 13, 2003, 06:35 PM

Quote:

Originally posted by Talicni_Tom
Anybody tried this driver on igp320m?

Msix tried them and they worked for him, so give em a try

ToshiroOC · Feb 13, 2003, 06:44 PM

Msix tried em on an IGP340M, and Talicni_Tom is talking about an IGP320M... I really don't know the difference and if that difference matters at all as far as the modded drivers... however, I would guess that they would work fine.

MoinMan · Feb 13, 2003, 07:28 PM

Thx! Now download worked! Will try it asap.

AvA · Feb 13, 2003, 07:52 PM

Great job paje!
Your modifications made the drivers work on my laptop.

I'm still wondering what's wrong with my modded version of this set: as schwarz said it is a very simple process. Still this time I can't get it right.
I even compared what I did to what paje did, and I can't spot any difference... Weird

Anyway, we have someone to do the dirty work now!

Again a big thanks goes to schwarz as well: you've been a great teacher (and I haven't been a good pupil

)

Hadberz · Feb 13, 2003, 07:55 PM

Thanks for the drivers patje.

IGP340M=Intel
IGP 340M" = ati2mtag_RS200M, PCI\VEN_1002&DEV_4337&SUBSYS_00560E11
IGP320M=Athlon
ATI Radeon IGP 320M" = ati2mtag_U1, PCI\VEN_1002&DEV_4336&SUBSYS_0024103C

Other then that they should be the same. I've got the IGP320 in my Compaq. I was foolin around with the CAT 3.1 drivers. I got the DirectX to work fine, but OpenGL was crashing on me. I'll give your drivers a try patje, Thanks again.

MoinMan · Feb 13, 2003, 08:02 PM

For some reason Ati Smart service isn't installed and so I have no 3D Acceleration. (on a Radeon Mobility 7500)
[Edit] Now it works! Damn Ati uninstaller. I úninstalled and reinstalled everything again and now it works flawlessly! THX!

Time · Feb 13, 2003, 08:57 PM

These drivers installed perfectly on my mobility 6 7000 Lappy with all the settings availible.
My thanx to the tweaker-author...nice goin!...

beaker77 · Feb 13, 2003, 09:03 PM

These drivers are working great for me. Got me up to #2 overall for my video chip on both 3Dmark 2001 SE and 3Dmark03.
3Dmark03 sucks by the way. Amazing graphics but extremely slow.
ECS G732 laptop with 64mb Mobility Radeon 9000 M9

schwarz2 · Feb 14, 2003, 12:44 AM

great patje...glad i can help in any way i can....though i guess the thanks all go around in circles since dissonance helped me out originally so now other people can say you helped them

take care

schwarz

Hadberz · Feb 14, 2003, 08:16 AM

Anyone having any problems with OpenGL? The drivers work great in DirectX, but OpenGL is a slideshow with Half-life and Jedi Knight 2. The originial drivers for my Compaq work fine for these games. This may be a problem with the IGP320. I've tried swaping out to the older OpenGL driver but same problem.

RIV@NVX · Feb 14, 2003, 11:06 AM

Seems like a good work. Deserves a sticky (at least for some time).

patje · Feb 14, 2003, 01:15 PM

Thnx RIV@NVX, makes it easier to look up

sndlogic · Feb 14, 2003, 05:31 PM

Thanks for your work! I have a Fire GL X1 128 (the real one! not a 9700->X1 mod) and can't get these to install. Any ideas?

[quote]Originally posted by patje
[b]ok boys and girls,

my modded drivers are finnished! --> They work for me , they should work for you!

Support for:
Mobility Fire GL 9000

jnhl · Feb 15, 2003, 08:52 AM

Can someone explain what the fast writes feature does. With some drivers its working but with this driver it dosent. When i reboot it always set the fast writes to off. I have the Ati Mobility 7500 adapter. TIA.

sndlogic · Feb 15, 2003, 10:24 AM

After some playing around, I did finally figure out how to get DX9 working on a FireGL card.

I understand from Omega that it's impossible to get Cat drivers to work on a GL card (sigh).

1) Install Firel GL drivers: 1028 (from ATI website).

2) Replace "ati3duag.dll" in SYSTEM32 with the one from Catalyst 3.0a (from ATI website). DO NOT use Cat 3.1 version - ATI 'fixed' it to not run on a Fire GL card - causes blue screen at boot.

3) Optional: can install Control Panel from either Cat 3.0 or 3.1.

Ran 3DMark2003 - all options work! Got a 4983. Not bad for a card optimized for GL instead of of DX/gaming!

I don't know what the downside is yet. I'm sure ATI had a good reason for keeping a DX8 version of the file released with their latest GL drivers.

Good luck!

UberLord · Feb 17, 2003, 08:55 AM

To get the Comaq Presario 2100 with an IGP 340, make the following changes.

INSTALL.INI
Add 0x4337:0x0850103C,0x4337:0x002A103C to the end of the long lines under the Win2K and WinXP sections

C2_07447.inf & CX_07447.inf
All the two lines below to the [ATI.Mfg] section
"IGP 340M" = ati2mtag_RS200M, PCI\VEN_1002&DEV_4337&SUBSYS_002A103C
"IGP 345M" = ati2mtag_RS200M, PCI\VEN_1002&DEV_4337&SUBSYS_0850103C

HTH

patje · Feb 17, 2003, 09:55 AM

Thnx Uberloard, I'll keep it in mind for future usage, but i guess most people will be using Omega's set right know, I know I will

unless they are not good which i doubt ofcourse

UberLord · Feb 17, 2003, 10:28 AM

Quote:

Originally posted by patje
Thnx Uberloard, I'll keep it in mind for future usage, but i guess most people will be using Omega's set right know, I know I will unless they are not good which i doubt ofcourse

It's UberLord

I didn't actually know Omegadrive had migrated the Mobility stuff into his drivers. Been working for week in the states (I arrived back in the UK 07:20 this morning

) and bought a laptop on the last day. Spotted your thread though

patje · Feb 17, 2003, 10:43 AM

my mistake uberLORD ! Yeah he did add support for Mobility so check them out. btw What laptop did you buy?

UberLord · Feb 17, 2003, 11:16 AM

Quote:

Originally posted by patje
What laptop did you buy?

Compaq Presario 2100. A steal at $850 imo.

driverup · Feb 17, 2003, 04:54 PM

any possibility to mod a mobility randeon 7500 to firegl 7800

Thanks in advance.

patje · Feb 18, 2003, 05:13 AM

Quote:

Originally posted by driverup
any possibility to mod a mobility randeon 7500 to firegl 7800

Thanks in advance.

No idea, but if you find out, let me know asap

hehe

Thunderball.se · Feb 18, 2003, 05:10 PM

Quote:

Originally posted by msix
Dear Friend Petja!!!

Thanx for your modded driver, I installed it and had a nice overall gain in my system, I had to download the control panel of course... But all went well!!! I recommend that modding to all Mobility users!!! A new DH star has born!!! DD

Alex

Ehm... never used anything except Omega/Plutonium stuff...

Control panel? I have to download this separately?

Oh, and in the same line as the last two posters then... I have an M6 LY (7000 i think)... can I upgrade that somehow? (Cept ram, because it already has 32mb exclusive ram...)

patje · Feb 19, 2003, 03:10 AM

Control panel is sepperate bacause i did not changend anything iwth it. It supports the M6, (don't know what LY means) But I do not thnik you can upgrade it. Too bad huh... Btw, I tried Omega's drivers yesterday and they als do a great job, try them aswell! GReetzzz