Hoffmann

Hiho,

I posted this already in the ATI Graphic-Card Forum. I do not know if this Error is Hardware or Software site (i think and hope software) and so i post it in this driver forum, too.
I have a major problem with my x800xl in 3d games (all 3d games). there seems to be a problem with overlaying textures. i have some screens here, so show you the problems:

BF2:
http://www.directupload.net/show/d/622/3Fbe9mW8.jpg

COD2:
(with bug)
http://www.directupload.net/show/d/622/xKz5SqXy.jpg
(without bug, different angel)
http://www.directupload.net/show/d/622/LAlzgjSE.jpg

while moving, and changing the angel, the textures start to "flicker". has someone an idea? i tried many drivers to fix that problem, but i did not find a solution.

DXDiag (first lines):

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: German (Regional Setting: German)
System Manufacturer: MSI
System Model: MS-6702
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3400+, MMX, 3DNow, ~2.2GHz
Memory: 2048MB RAM
Page File: 290MB used, 3650MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

---------------
Display Devices
---------------
Card name: RADEON X800 Series (Omega 3.8.221)
Manufacturer: ATI Technologies Inc. (Omega 3.8.221)
Chip type: ATI RADEON X800 XL AGP (0x554D)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_554D&SUBSYS_03021002&REV_00
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (70Hz)
Monitor: SyncMaster 930B/930BC/930BF(Digital)
Monitor Max Res: 1280,1024
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6599 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 1/25/2006 04:52:48, 255488 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: Nicht zutreffend
Mini VDD: ati2mtag.sys
Mini VDD Date: 1/25/2006 04:52:31, 1478656 bytes
Device Identifier: {D7B71EE2-160D-11CF-756A-0823A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x554D
SubSys ID: 0x03021002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

[hobo]eclipse

off hand i can say make sure to use drivercleaner when changing drivers, and maybe the card(or your whole cpu)needs the dust blown out of it??

__________________

Hoffmann

Hehe, I remove old drivers very carefully, and there is not much dust in the Computer. I have this graphic problems for a long time - so i thought it may be a general problem and i am not the only one.

I Really do not know what is wrong, but i think it has something to do with the "Z" coordinates of the overlaying textures. Is there any Driver/Software Option that has to do with that?