Cannot get full resolution on HD3870 0n 22" monitor

Nabukodonosor · Mar 25, 2008, 08:07 PM

Hi there. I'm having constant problem getting full 1680X1050 on my 22" samsung 223bw, in Vista 32-bit SP1 Ultimate. I've tried all catalyst drivers from 7.12 to 8.3. Also tried drivers from CD that came with the card. ATI Tray Tool can't start with some "cannot load low-level driver" error or something like that. I can only get 800X600 and 1024X768. It's very frustrating. I have the latest Samsung drivers for my monitor. Some pics: http://www.benchmark.co.yu/forum/att...1&d=1206476562 http://www.benchmark.co.yu/forum/att...2&d=1206476593 It's all good in XP.

[hobo]eclipse · Mar 25, 2008, 08:15 PM

I dont use any of the 3rd party Radeon apps on my 3870. ATT and ATI Tool were always squirrly for me with the 3870. Rivatuner did alright. After a bios flash to correct the fan issues, i just stick with the CCC. I can understand not wanting to use the CC as i can be a RAM hog, but how much RAM do you have? If you have 2 gig+ i'd go with vista and the CCC only, if you have less than 2 gigs stick with XP and your usual driver setup with 3rd party apps.

What was the original question though, getting tray tools to work or getting the resolution to 1680*1050? Can u set it with windows display properties when u right click the desktop?

Judas · Mar 26, 2008, 09:32 AM

CCC has a extremely small footprint now.. specially under vista.....

the CCC program and it's sub programs that run constantly take up such minimal amounts of ram and power that they essentially don't excist...

There isn't any reason now to use ccc... technically.. and the capabilities of the hd3870 are basically dropped to 0 when your not using CCC...

Anyways, make sure your not disabling any of the services nessary for the card to work.

Nabukodonosor · Mar 26, 2008, 11:25 AM

Quote:

Can u set it with windows display properties when u right click the desktop?

No! That's the issue.

Quote:

Anyways, make sure your not disabling any of the services nessary for the card to work.

I didn't disable anything. I only installed the Windows and after that Catalyst drivers. Nothing else!

**temeteus82** · Mar 26, 2008, 11:44 AM

I think the issue is that the monitor is identified as multiple monitors. You have two monitors ??

Nabukodonosor · Mar 26, 2008, 12:26 PM

No, just one. But I don't think that's the issue here. Here's the pic fom XP: zSHARE - clipboard01.jpg

Judas · Mar 26, 2008, 03:54 PM

can you give us a full list of your system specs?

Nabukodonosor · Mar 26, 2008, 04:13 PM

Sure. Amd Athlon X2 6000+ Biostar Ta770 a2+ Geil 2GB 800mhz (2x1gb) 2X250 GB Western Digital Raid0 Samsung 22" 223BW MSI ATI RX3870 T2D512E Sound onboard

[hobo]eclipse · Mar 26, 2008, 07:24 PM

I would try a run with DC and reinstall, if the issue persists maybe try and reinstall chipset drivers, is there anything coming up as not fuctioning properly in the device manager?

Nabukodonosor · Mar 26, 2008, 07:35 PM

No. Everything looks just fine. Except...I have a lot of problems with my raid0 system...lot of 'disk corrupt' errors. I don't know what is the cause of this. Maybe this is someway connected with this 'resolution' problem of mine.

**temeteus82** · Mar 27, 2008, 02:16 AM

if you got those issues this issues is less important. If your disc is corrupt then I strongly recommend you to fix that issue, since it will cause data loss.

*CATALYSTCATCHER* · Mar 27, 2008, 07:51 AM

Quote:

Originally Posted by temeteus82

if you got those issues this issues is less important. If your disc is corrupt then I strongly recommend you to fix that issue, since it will cause data loss.

I second and third that advice.
a) because it is 100% the correct thing to do
b) I suspect the ati display driver is not actually running. And that could be due to corrupt files that refuse to load.

8x6 and 10x7 only, tell me you are likely running the default Vista display driver which does not allow anything else except, maybe 640.

Of course that is all just a hunch, but you gotta fix your disks first. Otherwise, you are building your Vista home on a foam rubber foundation in quicksand.

Nabukodonosor · Mar 27, 2008, 10:32 AM

How to fix this disk issue? My disks are in raid0 mode that goes over southbridge controler. My motherboard also has one more raid controler, jMicron. I have a feeling these raid controlers are the main couse of all my problems. In Vista, i think i'm runnng the default display drivers, not the catalyst.

**temeteus82** · Mar 27, 2008, 10:47 AM

run chkdsk /R on all drives, some drives needs to be checked during boot. If that can't fix them you need either new hardrives or new mobo.

Nabukodonosor · Mar 27, 2008, 01:00 PM

Is there a utillity that can tell me for sure if my hard drive or mobo is corruptly?

Nabukodonosor · Mar 27, 2008, 02:39 PM

I did the check disk, and here are the results: zSHARE - chkdsk d.jpg zSHARE - chkdsk e.jpg This is for D and E. C was check during the boot time. I think it went just fine.

suhi-R · Mar 27, 2008, 03:54 PM

did you try updateing your monitor drivers. i have 226WB S class monitor and sapphire 3870 card and hatdproblem like that before i updated my monitor drivers. you can get drivers at the samsung web page

Nabukodonosor · Mar 27, 2008, 09:29 PM

Yes, i have the latest samsung drivers. These Download Center SAMSUNG

[hobo]eclipse · Mar 27, 2008, 10:41 PM

have you tried uninstalling the drivers and reinstalling them? i recommend you use drivercleaner after you uninstall in safe mode (read the instructions)

Nabukodonosor · Mar 28, 2008, 03:41 PM

Yes i have.

shaman9876 · Mar 28, 2008, 04:26 PM

When looking at your screen shots above I can see that you monitor is identified as Default. Which means that your drivers are not installed if they were then it would identify the monitor as a samsung. When looking at the manual for this monitor is shows step by step instructions for it with pictures.

from manual.

Microsoft® Windows VistaTM Operating System
Insert your Manual CD into your CD-ROM drive.
Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization".
Click "Personalization" and then "Display Settings".
Click "Advanced Settings...".
Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the
configuration for your monitor is completed. The monitor can be used as is.
If the message “Windows needs...” is displayed, as shown in the figure below,
click "Continue".
This monitor driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage
SAMSUNG United States
Click "Update Driver..." in the "Driver" tab.
Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list
of device drivers on my computer".
Click "Have Disk..." and select the folder (for example, D:\Drive) where the driver setup file is
located, and click "OK".
Select the model that matches your monitor from the list of monitor models on the screen, and
click "Next".
Click "Close"→ "Close" → "OK" → "OK" on the following screens displayed in sequence.

I hope it helps but it looks like the monitor is not install or not installed properly and you should try it again following the manual.

It has happened to me too many times. When It happened in Linux it was a pain for they did not list the hz vertical refresh in the manual.

Good Luck.

Nabukodonosor · Mar 28, 2008, 04:50 PM

OK. I'll try. tnx

E-D@N · May 2, 2008, 11:35 AM

this one is easy

my friend also have an 22 inch screen with a weird resolution of 1680X1050...
i solved it easly - this issue has nothing to do with the HD card of yours you need a software that will tell the OS that you are able to such resolutions - in my friends case it was HP software that activated the 1680X1050 feature - in your case it suppose to be Samsung program... or something - i repeat - it's not the HD3870 issue... look for the disc that came with the monitor

it could be the drivers for the monitor - but as i recall,
a program was needed... "HP My Display" program fixed it for him...

Good luck!

Mar 25, 2008, 08:07 PM	#1
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	Cannot get full resolution on HD3870 0n 22" monitor Hi there. I'm having constant problem getting full 1680X1050 on my 22" samsung 223bw, in Vista 32-bit SP1 Ultimate. I've tried all catalyst drivers from 7.12 to 8.3. Also tried drivers from CD that came with the card. ATI Tray Tool can't start with some "cannot load low-level driver" error or something like that. I can only get 800X600 and 1024X768. It's very frustrating. I have the latest Samsung drivers for my monitor. Some pics: http://www.benchmark.co.yu/forum/att...1&d=1206476562 http://www.benchmark.co.yu/forum/att...2&d=1206476593 It's all good in XP.

Mar 25, 2008, 08:15 PM	#2
[hobo]eclipse ...just bummin 'round Join Date: Oct 2004 Posts: 2,577 Rep Power: 51 System Specs	I dont use any of the 3rd party Radeon apps on my 3870. ATT and ATI Tool were always squirrly for me with the 3870. Rivatuner did alright. After a bios flash to correct the fan issues, i just stick with the CCC. I can understand not wanting to use the CC as i can be a RAM hog, but how much RAM do you have? If you have 2 gig+ i'd go with vista and the CCC only, if you have less than 2 gigs stick with XP and your usual driver setup with 3rd party apps. What was the original question though, getting tray tools to work or getting the resolution to 1680*1050? Can u set it with windows display properties when u right click the desktop? __________________ seeing the same things over again, repeating the same slogans we don't know where we've been

Mar 26, 2008, 07:24 PM	#9
[hobo]eclipse ...just bummin 'round Join Date: Oct 2004 Posts: 2,577 Rep Power: 51 System Specs	I would try a run with DC and reinstall, if the issue persists maybe try and reinstall chipset drivers, is there anything coming up as not fuctioning properly in the device manager? __________________ seeing the same things over again, repeating the same slogans we don't know where we've been

Mar 26, 2008, 07:35 PM	#10
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	No. Everything looks just fine. Except...I have a lot of problems with my raid0 system...lot of 'disk corrupt' errors. I don't know what is the cause of this. Maybe this is someway connected with this 'resolution' problem of mine. Last edited by Nabukodonosor; Mar 26, 2008 at 10:24 PM.

Mar 27, 2008, 10:41 PM	#19
[hobo]eclipse ...just bummin 'round Join Date: Oct 2004 Posts: 2,577 Rep Power: 51 System Specs	have you tried uninstalling the drivers and reinstalling them? i recommend you use drivercleaner after you uninstall in safe mode (read the instructions) __________________ seeing the same things over again, repeating the same slogans we don't know where we've been

Mar 26, 2008, 12:26 PM	#6
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	No, just one. But I don't think that's the issue here. Here's the pic fom XP: zSHARE - clipboard01.jpg

Mar 26, 2008, 04:13 PM	#8
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	Sure. Amd Athlon X2 6000+ Biostar Ta770 a2+ Geil 2GB 800mhz (2x1gb) 2X250 GB Western Digital Raid0 Samsung 22" 223BW MSI ATI RX3870 T2D512E Sound onboard

Mar 27, 2008, 10:32 AM	#13
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	How to fix this disk issue? My disks are in raid0 mode that goes over southbridge controler. My motherboard also has one more raid controler, jMicron. I have a feeling these raid controlers are the main couse of all my problems. In Vista, i think i'm runnng the default display drivers, not the catalyst.

Mar 27, 2008, 01:00 PM	#15
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	Is there a utillity that can tell me for sure if my hard drive or mobo is corruptly?

Mar 27, 2008, 02:39 PM	#16
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	I did the check disk, and here are the results: zSHARE - chkdsk d.jpg zSHARE - chkdsk e.jpg This is for D and E. C was check during the boot time. I think it went just fine.

Mar 27, 2008, 03:54 PM	#17
suhi-R DriverHeaven Junior Member Join Date: Sep 2005 Location: Slovenia Posts: 54 Rep Power: 0	did you try updateing your monitor drivers. i have 226WB S class monitor and sapphire 3870 card and hatdproblem like that before i updated my monitor drivers. you can get drivers at the samsung web page

Mar 27, 2008, 09:29 PM	#18
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	Yes, i have the latest samsung drivers. These Download Center SAMSUNG

Mar 28, 2008, 03:41 PM	#20
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	Yes i have.

Mar 28, 2008, 04:26 PM	#21
shaman9876 DriverHeaven Junior Member Join Date: Oct 2002 Location: USA, WI Posts: 65 Rep Power: 44 System Specs	When looking at your screen shots above I can see that you monitor is identified as Default. Which means that your drivers are not installed if they were then it would identify the monitor as a samsung. When looking at the manual for this monitor is shows step by step instructions for it with pictures. from manual. Microsoft® Windows VistaTM Operating System Insert your Manual CD into your CD-ROM drive. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization". Click "Personalization" and then "Display Settings". Click "Advanced Settings...". Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message “Windows needs...” is displayed, as shown in the figure below, click "Continue". This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage SAMSUNG United States Click "Update Driver..." in the "Driver" tab. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer". Click "Have Disk..." and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". Click "Close"→ "Close" → "OK" → "OK" on the following screens displayed in sequence. I hope it helps but it looks like the monitor is not install or not installed properly and you should try it again following the manual. It has happened to me too many times. When It happened in Linux it was a pain for they did not list the hz vertical refresh in the manual. Good Luck. Last edited by shaman9876; Mar 28, 2008 at 04:33 PM.

Mar 28, 2008, 04:50 PM	#22
Nabukodonosor DriverHeaven Newbie Join Date: Jan 2006 Posts: 15 Rep Power: 0	OK. I'll try. tnx

May 2, 2008, 11:35 AM	#23
E-D@N DriverHeaven Junior Member Join Date: May 2008 Posts: 72 Rep Power: 0 System Specs	this one is easy my friend also have an 22 inch screen with a weird resolution of 1680X1050... i solved it easly - this issue has nothing to do with the HD card of yours you need a software that will tell the OS that you are able to such resolutions - in my friends case it was HP software that activated the 1680X1050 feature - in your case it suppose to be Samsung program... or something - i repeat - it's not the HD3870 issue... look for the disc that came with the monitor it could be the drivers for the monitor - but as i recall, a program was needed... "HP My Display" program fixed it for him... Good luck! Last edited by E-D@N; May 2, 2008 at 11:48 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LCD monitor issues!	deeman	Hardware Discussion & Support	1	Nov 6, 2007 08:03 AM
Custom Monitor Resolution	Timechange01	Other Video Cards	3	Oct 11, 2005 04:27 AM
Maximum Resolution Setting Stopped Working	ColinHigbie	Windows XP/2K Radeon Display Drivers	1	Aug 27, 2004 04:22 PM
Scaling to Resolution on Mobility 9000?	brainwiz64	Windows XP/2K Radeon Display Drivers	0	Jul 28, 2003 11:22 AM
Some help plz on L1/L2 cache P4 N/W	N4sty	Hardware Discussion & Support	1	Jan 18, 2003 09:47 PM