Introduction

In Win were established back in 1986 and they never tried to diversify beyond designing and building computer cases. Merely a few months ago the company released a long line of high performance PSUs, the Commander series. This Commander series consists of five units, starting at 650W output and reaching up to 1500W for the high end model.

Today we are going to review the 1200W unit and see if it can perform sufficiently enough in order to appeal to the hardcore enthusiasts it is targeted towards.

Manufacturer's Features and Specifications

• Quad independent 12V rails
• High efficiency >80%
• Active PFC (>0.9)
• High efficiency voltage transfer technology for double forward circuit design
• Intelligent fan speed control provides silent operation
• 14cm two ball bearing fan for reliability and quiet performance
• 6+2pin PCIe Connectors to support high-end graphics cards
• Premium Japanese capacitors provide reliability and superior performance
• Modular cable design
• Provides over-current, over-voltage, over-power, under-voltage and short circuit protections to maximum safety
• Supports ATX 12V 2.3/ EPS 12V 2.91
• 4-pin Molex patented easy swap connector
• Independent voltage circuit design
• Universal AC input of 100-240VAC
• Hexagon shaped ventilation for excellent heat dissipation

Type	Supports ATX 12V 2.3/ EPS 12V 2.91
PFC	Full Range Active PFC (>0.9)
Fan	Silent 14cm dual ball bearing fan
Efficiency	>80%
MTBF	>100.000 hours
Full protection	OVP – OCP – OPP – UVP – SCP
Dimensions	150 x 200 x 86 mm
Safety	BSMI / CB / CCC / CE / FCC / TUV / UL

AC Input	100-240 VAC, 47-63HZ, 15A
DC Output	3,3V	12V1	12V4	5V	12V2	12V3	-12V	5VSB
Max output current	30A	20A	36A	30A	20A	36A	0,8A	3,5A
Max combined wattage	600W			600W			9,6W	17,5W
Total power	1200W

Packaging and Bundle

The In Win Commander 1200W unit is supplied in a sturdy cardboard box which is covered with militaristic camouflage theme artwork. Only the rated output power of the product is written at the front of the box, but the features and specifications can be found at the rear. Inside the box everything is very well packed and the unit itself is protected by two thick Styrofoam pieces, keeping it safe during transportation. Inside the package you will find a couple of pouches for storing the cables you aren't going to use, a small manual, typical 3M screws, a couple of cable ties and a warranty card. Strangely, there were two AC power cables in the package. There is also a bag with all of the modular cables inside.