high temperatures

~~REGENERAT1ON~~ · Aug 27, 2004, 04:06 PM

i got new hardware (amd barton 2800+ / nf7-s v2.0)
now since i installed/removed the heatsink.. there was almost no compound left.. so i reapplied it with some cheap silicon compound. 12.5x166 (vcore 1.65 - 2.08ghz) idle temps is 48-50c and 52c in load.. anyway i can reach 12.5x187 (vcore 1.75 - 2.37ghz) but its idle at 50c and in load at 55-60c.. since i dont have high quality thermal compound and its will take me some time to get new thermaltake heatsink+fan+compound.. so what you recommend me to do until ill get the new cooling hardware ?
you think its safe 50-60c for 1-2 weeks ?

p.s.
4 in fans - 2 ex fans (lol)
stock heatsink/fan with silicon compound
stock abit chipset fan
good airflow condition (had 35c with overclocked AMD 1800+)

mkk · Aug 27, 2004, 06:03 PM

If you don't get far above 60 even when gaming then it is perfectly fine. In that case you would not need a new cooler, but I guess using a stock cooler might feel a bit dull.

That chip seems like a good overclocker so you might perhaps also get further with a better cooler. I don't have any specific advice as there are so many good CPU coolers out today. Search for some new reviews and avoid the most expensive products because they aren't really worth the cost.

~~REGENERAT1ON~~ · Aug 27, 2004, 06:26 PM

thanks for your reply. i already checked and i'm gonna try thermaltake Volcano 12.. i had high quality cooler but its got screwed with the time.. thats why i am using stock cooler..

GutterPunk · Aug 27, 2004, 06:34 PM

just make sure you dont go too far into 60C as most people dont recommend it and its uncharted territory for most as they try to get much lower. just be careful and keep an eye out.

tastyweat · Aug 27, 2004, 06:37 PM

tbh... I got into the low 70s with a barton 2800... granted it was just over 2.5ghz... but it ran fine... (damn those coolermaster aero 7+s!!! lol)

~~REGENERAT1ON~~ · Aug 27, 2004, 07:11 PM

thanks guys.. i setted auto shutdown at 60c

Aug 27, 2004, 04:06 PM	#1
~~REGENERAT1ON~~ NGO Crew Join Date: Jun 2004 Posts: 412 Rep Power: 0	high temperatures i got new hardware (amd barton 2800+ / nf7-s v2.0) now since i installed/removed the heatsink.. there was almost no compound left.. so i reapplied it with some cheap silicon compound. 12.5x166 (vcore 1.65 - 2.08ghz) idle temps is 48-50c and 52c in load.. anyway i can reach 12.5x187 (vcore 1.75 - 2.37ghz) but its idle at 50c and in load at 55-60c.. since i dont have high quality thermal compound and its will take me some time to get new thermaltake heatsink+fan+compound.. so what you recommend me to do until ill get the new cooling hardware ? you think its safe 50-60c for 1-2 weeks ? p.s. 4 in fans - 2 ex fans (lol) stock heatsink/fan with silicon compound stock abit chipset fan good airflow condition (had 35c with overclocked AMD 1800+)

Aug 27, 2004, 06:34 PM	#4
GutterPunk I = Greatest Dood Join Date: Nov 2003 Location: Nebraska Posts: 5,945 Rep Power: 54	just make sure you dont go too far into 60C as most people dont recommend it and its uncharted territory for most as they try to get much lower. just be careful and keep an eye out. __________________ Rock On \m/ Thank you Mousey for the Sig! --------------- Intel Core2Duo E6660 (3.4GHZ) ~ Tuniq Tower 120 ~ Enermax Galaxy 1000W ~ Corsair Dominator @ 1090MHZ 5-5-5-15 (OCZ XTC Modded Cooler)~ EVGA 8800GTX W/ HR-03 Plus 120MM ~ Asus DVD-RW LiteScribe ~ LG DVD-RW ~ Corsair Voyager 2GB ReadyBoost Drive ~ Vantec Nexus Fan Controller ~ ThermalTake Armor 25CM fan ~ Personal Finance Blog: Dent Your Debt

Aug 27, 2004, 06:37 PM	#5
tastyweat Lurking Join Date: Feb 2003 Location: The void Posts: 4,776 Rep Power: 58 System Specs	tbh... I got into the low 70s with a barton 2800... granted it was just over 2.5ghz... but it ran fine... (damn those coolermaster aero 7+s!!! lol) __________________

Aug 27, 2004, 06:03 PM	#2
mkk cheap philanthropist Join Date: Oct 2003 Location: Gefle, Sweden Posts: 3,698 Rep Power: 67 System Specs	If you don't get far above 60 even when gaming then it is perfectly fine. In that case you would not need a new cooler, but I guess using a stock cooler might feel a bit dull. That chip seems like a good overclocker so you might perhaps also get further with a better cooler. I don't have any specific advice as there are so many good CPU coolers out today. Search for some new reviews and avoid the most expensive products because they aren't really worth the cost.

Aug 27, 2004, 06:26 PM	#3
~~REGENERAT1ON~~ NGO Crew Join Date: Jun 2004 Posts: 412 Rep Power: 0	thanks for your reply. i already checked and i'm gonna try thermaltake Volcano 12.. i had high quality cooler but its got screwed with the time.. thats why i am using stock cooler..

Aug 27, 2004, 07:11 PM	#6
~~REGENERAT1ON~~ NGO Crew Join Date: Jun 2004 Posts: 412 Rep Power: 0	thanks guys.. i setted auto shutdown at 60c