Roadee's Fastest Rig Competition Discussion Thread

PangingJr · Dec 4, 2007, 01:17 PM

my friend got a few HyperX PC2 9600 (DDR2-1200) kits, they're direct import from oversea since it first out, right now it's available everywhere and it's very cheaper than before.
he kills a lot of D9's based RAM himself, i'm talking about 20 kits or more, but he is loving the HyperX a lot and and carefully use them, lol.
all of the kits he is having can run DDR-1150MHz CAS4-4-4 @ 2.3V on Gigabyte P35 and and DFI P965P boards, which is very good at this voltage use.

G.Skill GA DDR2-800 CAS3 2.2-2.4V 2x1GB kit can also run something similar to the HyperX DDR2-1200,
but it also seems not available anymore.

i don't know about the rest of DDR2's, but then again, all of them are a lot of hit and miss.

LHC · Dec 5, 2007, 09:19 AM

Wanted to get in the competition, but I've been wondering...

What's the difference between Intel Pro and Intel Super Modified? Any place I can find a description of the different categories? Thanks

ChaosMinionX · Dec 8, 2007, 12:45 AM

Quote:

Originally Posted by LHC

Wanted to get in the competition, but I've been wondering...

What's the difference between Intel Pro and Intel Super Modified? Any place I can find a description of the different categories? Thanks

Sorry for the delay on seeing this....

It would seem the page giving the official rules is down.

Basically

Intel Pro - Aircooling only, no volt mods or other crazy mods done, and OCing.

Intel Super Modified - Go wild with anything you can get to obtain the highest score. Volt mods, LN2/Phase/Water/Air Cooling, basically anything goes.

Also they are broken down between CF/SLI and Single GFX.

cheers

ChaosMinionX · Dec 8, 2007, 05:05 PM

http://www.driverheaven.net/web_users/roadeecomp/

Rules are back up. Get benching

dsdsdk · Feb 14, 2008, 10:32 AM

Am i the only one thinking water cooling isnt "super modified"? especially these days where cpus oc just as well on good air, as on water...

Lowfat · Feb 14, 2008, 11:45 AM

Quote:

Originally Posted by dsdsdk

Am i the only one thinking water cooling isnt "super modified"? especially these days where cpus oc just as well on good air, as on water...

agreed. I've always used watercooling on mid-range gear so I really can never compete

dsdsdk · Feb 18, 2008, 05:37 AM

maybe I should get a cpu-heatsink/fan, bench, upload score and go back to watercooling (it's more quiet)... ok, maybe my E8500 will run 100mhz less, but hey, i'm in a lower catagory..
wouldnt it be easier if watercooling wasnt condisered "super modified" or "the extreme edge of entusiast oc"?

ChaosMinionX · Feb 18, 2008, 02:15 PM

Quote:

Originally Posted by dsdsdk

maybe I should get a cpu-heatsink/fan, bench, upload score and go back to watercooling (it's more quiet)... ok, maybe my E8500 will run 100mhz less, but hey, i'm in a lower catagory..
wouldnt it be easier if watercooling wasnt condisered "super modified" or "the extreme edge of entusiast oc"?

The only reason your PCmark05 score is low is because your in XP.... it does much better on Vista because of the 3d accelerated windows, so your transparent windows test sky rockets. Also 3870s run better in Vista then they do in XP from my own experience.

Tril · Mar 10, 2008, 01:38 AM

I'm having trouble with pcmark05. Many tests fail. Here's the list of failing tests :

HDD - XP Startup
Web Page Rendering
HDD - General Usage
Text Edit
Image Decompression
File Compression
File Encryption
HDD - Virus Scan
Memory Latency - Random 16 MB

My system specs are under my name. I thought maybe it had to do with Windows Vista but it works for Judas so that's not the problem. Maybe this has been mentionned before in the thread but I haven't read it all.

ChaosMinionX · Mar 10, 2008, 01:41 AM

Quote:

Originally Posted by Tril

I'm having trouble with pcmark05. Many tests fail. Here's the list of failing tests :

HDD - XP Startup
Web Page Rendering
HDD - General Usage
Text Edit
Image Decompression
File Compression
File Encryption
HDD - Virus Scan
Memory Latency - Random 16 MB

My system specs are under my name. I thought maybe it had to do with Windows Vista but it works for Judas so that's not the problem. Maybe this has been mentionned before in the thread but I haven't read it all.

What kind overclock you running?

Tril · Mar 10, 2008, 02:29 AM

I'm running stock clocks on the cpu and the ram.

EDIT : I found a solution to my problem. I need to right click the link to the program and click "Run as administrator".

EDIT 2 : I'm giving up taking part in Roadee's Fastest Rig Competition (for now). I'm having overheating problems when overclocking. When I installed my cpu cooler (Zalman CNPS8000), I noticed that it touched one heatsink of my motherboard (ASUS P5E3 Deluxe WiFi-AP) slightly. Because of that, I was not sure if the cpu cooler was laying flat against the cpu. I gave it a try anyway and the computer ran fine at stock clocks. Now, when overclocking the cpu temps of the two cores climb very fast, very high so it looks like the heatsink is probably not perfectly flat against the cpu. I won't be able to overclock until I swap the cpu cooler with the stock Intel cooler (or another cpu cooler) and I don't think I'll do it for now (feeling too lazy today

).

So my advice to anyone reading this : I don't recommend using a Zalman CNPS8000 with a ASUS P5E3 Deluxe WiFi-AP.

Son_of_Thunder · Apr 15, 2008, 02:47 AM

Anybody know why it's been three weeks and blitzen still doesn't have any award?

ChaosMinionX · Apr 15, 2008, 03:04 AM

Quote:

Originally Posted by Son_of_Thunder

Anybody know why it's been three weeks and blitzen still doesn't have any award?

Allow Me to express my deepest apologies!

I have fixed his entry, and he has been awarded the Avatar

Between the broken Radiator that I had (got a crack in the welding around the inlet/outlet valves of the radiator) and the crappy couple of X3350 (45nm Q9450 equivalents) I havent been doing as much as I should.

I am back to business though

Blitzen · Apr 16, 2008, 12:26 PM

Quote:

Originally Posted by ChaosMinionX

Allow Me to express my deepest apologies!

I have fixed his entry, and he has been awarded the Avatar

Between the broken Radiator that I had (got a crack in the welding around the inlet/outlet valves of the radiator) and the crappy couple of X3350 (45nm Q9450 equivalents) I havent been doing as much as I should.

I am back to business though

woot, thanks for the title. unfortunately that thing is about as clocked out as it can get so if anybody tries to take it from me i can't defend lol.

ChaosMinionX · Apr 16, 2008, 02:05 PM

Quote:

Originally Posted by Blitzen

woot, thanks for the title. unfortunately that thing is about as clocked out as it can get so if anybody tries to take it from me i can't defend lol.

Ahhh the downfalls of Phenom

Blitzen · Apr 16, 2008, 05:50 PM

i'm happy with the results i pulled out of that phenom. i raised it by 0.3GHz and it's a quad core. best yet is that it cost me considerably less than any intel that can keep up (unfotunatly there is a lot of intel CPUs that smoke it really bad)

matthew_davao · May 6, 2008, 07:32 PM

i want to clarify something with the intel stock single category, can I use a wolfdale and a dx10? the rules says E6600 at most. and dx9 cards only? Are the rules updated?

CDsDontBurn · May 6, 2008, 07:49 PM

probably so. rules haven't been updated in a while. they were updated shortly after the e6xx0 and q6xx0 CPUs were released.

Optix · Jun 30, 2009, 07:32 PM

Nevermind...I asked a silly question and then answered it.

Dec 5, 2007, 09:19 AM	#1592
LHC Stingy and Stubborn Join Date: Mar 2005 Location: New Jersey Posts: 1,324 Rep Power: 0 System Specs	Wanted to get in the competition, but I've been wondering... What's the difference between Intel Pro and Intel Super Modified? Any place I can find a description of the different categories? Thanks __________________

Dec 8, 2007, 05:05 PM	#1594
ChaosMinionX USB 3 dot oh Join Date: Nov 2006 Location: New York Posts: 2,182 Rep Power: 31 System Specs	http://www.driverheaven.net/web_users/roadeecomp/ Rules are back up. Get benching __________________ ::Heatware:: How you can help DriverHeaven by using Digg!

Feb 14, 2008, 10:32 AM	#1595
dsdsdk DriverHeaven Senior Member Join Date: Oct 2003 Location: Denmark, CPH. Posts: 586 Rep Power: 0 System Specs	Am i the only one thinking water cooling isnt "super modified"? especially these days where cpus oc just as well on good air, as on water... __________________ No more Kitty!

Feb 18, 2008, 05:37 AM	#1597
dsdsdk DriverHeaven Senior Member Join Date: Oct 2003 Location: Denmark, CPH. Posts: 586 Rep Power: 0 System Specs	maybe I should get a cpu-heatsink/fan, bench, upload score and go back to watercooling (it's more quiet)... ok, maybe my E8500 will run 100mhz less, but hey, i'm in a lower catagory.. wouldnt it be easier if watercooling wasnt condisered "super modified" or "the extreme edge of entusiast oc"? __________________ No more Kitty!

Mar 10, 2008, 02:29 AM	#1601
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,561 Rep Power: 39 System Specs	I'm running stock clocks on the cpu and the ram. EDIT : I found a solution to my problem. I need to right click the link to the program and click "Run as administrator". EDIT 2 : I'm giving up taking part in Roadee's Fastest Rig Competition (for now). I'm having overheating problems when overclocking. When I installed my cpu cooler (Zalman CNPS8000), I noticed that it touched one heatsink of my motherboard (ASUS P5E3 Deluxe WiFi-AP) slightly. Because of that, I was not sure if the cpu cooler was laying flat against the cpu. I gave it a try anyway and the computer ran fine at stock clocks. Now, when overclocking the cpu temps of the two cores climb very fast, very high so it looks like the heatsink is probably not perfectly flat against the cpu. I won't be able to overclock until I swap the cpu cooler with the stock Intel cooler (or another cpu cooler) and I don't think I'll do it for now (feeling too lazy today ). So my advice to anyone reading this : I don't recommend using a Zalman CNPS8000 with a ASUS P5E3 Deluxe WiFi-AP. Last edited by Tril; Mar 10, 2008 at 07:11 PM.

Dec 4, 2007, 01:17 PM	#1591
PangingJr Member Join Date: Mar 2003 Posts: 5,989 Rep Power: 55	my friend got a few HyperX PC2 9600 (DDR2-1200) kits, they're direct import from oversea since it first out, right now it's available everywhere and it's very cheaper than before. he kills a lot of D9's based RAM himself, i'm talking about 20 kits or more, but he is loving the HyperX a lot and and carefully use them, lol. all of the kits he is having can run DDR-1150MHz CAS4-4-4 @ 2.3V on Gigabyte P35 and and DFI P965P boards, which is very good at this voltage use. G.Skill GA DDR2-800 CAS3 2.2-2.4V 2x1GB kit can also run something similar to the HyperX DDR2-1200, but it also seems not available anymore. i don't know about the rest of DDR2's, but then again, all of them are a lot of hit and miss.

Mar 10, 2008, 01:38 AM	#1599
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,561 Rep Power: 39 System Specs	I'm having trouble with pcmark05. Many tests fail. Here's the list of failing tests : HDD - XP Startup Web Page Rendering HDD - General Usage Text Edit Image Decompression File Compression File Encryption HDD - Virus Scan Memory Latency - Random 16 MB My system specs are under my name. I thought maybe it had to do with Windows Vista but it works for Judas so that's not the problem. Maybe this has been mentionned before in the thread but I haven't read it all.

Apr 15, 2008, 02:47 AM	#1602
Son_of_Thunder DriverHeaven Senior Member Join Date: Jun 2004 Location: Kalamazoo, MI Posts: 1,434 Rep Power: 37 System Specs	Anybody know why it's been three weeks and blitzen still doesn't have any award? __________________

Apr 16, 2008, 05:50 PM	#1606
Blitzen DriverHeaven Newbie Join Date: Mar 2008 Posts: 6 Rep Power: 0 System Specs	i'm happy with the results i pulled out of that phenom. i raised it by 0.3GHz and it's a quad core. best yet is that it cost me considerably less than any intel that can keep up (unfotunatly there is a lot of intel CPUs that smoke it really bad) __________________ HOLY CRIP I'M A CRAPPLE

May 6, 2008, 07:32 PM	#1607
matthew_davao DriverHeaven Junior Member Join Date: Apr 2008 Posts: 35 Rep Power: 0	i want to clarify something with the intel stock single category, can I use a wolfdale and a dx10? the rules says E6600 at most. and dx9 cards only? Are the rules updated? __________________

May 6, 2008, 07:49 PM	#1608
CDsDontBurn 127.0.0.1 Join Date: May 2003 Location: Southern California Posts: 21,849 Rep Power: 133 System Specs	probably so. rules haven't been updated in a while. they were updated shortly after the e6xx0 and q6xx0 CPUs were released. __________________ CD's Corner // Her first day // A year later // RX-8 Club 3Dmark06 - 4176 // 3Dmark05 - 7459 // 3Dmark03 - 14289 // PCmark05 - 4453 // PCmark04 - 6297

Jun 30, 2009, 07:32 PM	#1609
Optix DriverHeaven Lover Join Date: Jun 2009 Location: New Brunswick, Canada Posts: 186 Rep Power: 10 System Specs	Re: Roadee's Fastest Rig Competition Discussion Thread Nevermind...I asked a silly question and then answered it.