Wolfdale/Yorkfield overclocking thread... - Page 3

PangingJr · Mar 14, 2008, 01:42 PM

just found this new "C1" stepping Q9300 - New arrival C1 stepping Q9300 - OCXtreme.org Forums,

i always though the Q9300 was a "M1" stepping (Q9450 and Q9550 would be C1 stepping) as i have seen at the sSpec details before.

anyways, i think the DDR3 setups is very interesting, coolaler overclocks the CPU to 3.0GHz 400FSB x 7.5 (default CPU multi) with only 1.09V and quite a stable setup.

[hobo]eclipse · Mar 24, 2008, 07:32 PM

Got this going on for now, about all im comfortable with on the stock cooler, seem ok temp wise?(opinions)

been runnin close to 5 hrs now, i just noticed i had 2 threads going in the 1st prime95(shouldn't affect stability testing, right?)

anybody know what to make of the temp sensor situation? i have idled at 40c +/-3c since i got it and the max i've seen was 72c, this was with 1.2v+ reading in cpuz, underload and OC at 3.6ish

all power saving functions on and only changed 3 bios settings and set the RAM to 5.5.5.15 timings, FSB to 400, RAM multiplier to 2.66 and +0.25v to the DDR2 to run at spec. I need a better cooler but my case is tight(Antec Sonata). It will come in a bit.

**ChaosMinionX** · Mar 25, 2008, 01:20 PM

Ordered a 9450 today... I will crank it out to 3.8ghz most likely, lets hope its not a dud.

[hobo]eclipse · Mar 25, 2008, 02:31 PM

Just primed 9 hrs at 3.6, 1.16875V set in bios. prime didnt fail but CPU-z, real temp, and the Window DWM "stopped working" sometime during the 9 hrs, all was well with prime95, but i guess i should take this as a sign that the voltage is to low?

PangingJr · Mar 25, 2008, 03:17 PM

[hobo]eclipse, in a undervolting overclock like yours, i would say, yes, this is almost always.

it could also be your DRAM setting.

but, first, you may want to try upping the core voltage to 1.1750V (or you can just try using 1.200V then back down later), then see if everything are okay with you this time.

-------------------------------------------------------

ChaosMinionX,

for the Q9450, not less than 480 FSB at the default CPU multi. Otherwise, it's a dud. Yes?

also, preferred to see how far the CPU can be undervolted when running at 450 FSB and stable.

**ChaosMinionX** · Mar 25, 2008, 07:54 PM

Quote:

Originally Posted by PangingJr

[hobo]eclipse, in a undervolting overclock like yours, i would say, yes, this is almost always.

it could also be your DRAM setting.

but, first, you may want to try upping the core voltage to 1.1750V (or you can just try using 1.200V then back down later), then see if everything are okay with you this time.

-------------------------------------------------------

ChaosMinionX,

for the Q9450, not less than 480 FSB at the default CPU multi. Otherwise, it's a dud. Yes?

also, preferred to see how far the CPU can be undervolted when running at 450 FSB and stable.

Yeah 475/480fsb or its a dud really.

**ChaosMinionX** · Apr 15, 2008, 02:17 AM

OK so, I have been more or less MIA for the last little bit.....

From benchmarking not cooperating, and not getting lots of time to do anything I had planned (work,school, other engagements that required my attention) I get a cracked radiator (thank god the radiator was outside the case and not inside) it was a very slow leak, and very small hole in the welding of the PA120.3, it has since been replaced, and I reinstalled it.

Now I ordered an X3350 (Q9450 equivalent Xeon part, which is actually just a branded Q9450, they are pretty much identical) now..... This chip is absolute rubbish, it will not clock over 440x8 no matter how much/little voltage and different settings I use, I spent 6 hours with this thing trying to get it to cooperate, from different BIOS's to clearing CMOS, it simply will not clock worth a damn. My Q6600 clocked higher, and was alot more cooperative.

I am going to try another bout with it and see how it does, if not I am tossing it and ordering new ones.

If anyone is in the market for a Q9450/X3350 Ive seen alot of nice 45nm coming out of MicroCenter, and Lagoom

=============

Pertinent info about the 45nm Quad I received.

Bought @ Newegg
FPO/BATCH # - L806A744
Pack Date - 4/3/08
VID - 1.125

I am not 100% sure its the Chip either, it could be the Motherboard, but highly unlikely since the board will do 490x8 with my Q6600 G0 on water. But I get this P.O.S X3350 and it wont even boot windows 450x8 at any voltage. I am trying to ascertain whether or not its BIOS related, or if its just a limitation of this particular chip.

These are pretty fun to play with, if this one would just cooperate.

Conquerz · Apr 16, 2008, 10:41 AM

I've just got a Q9300 and want to know if I can overclock it to 3.0GHz with the stock cooler?

My spec:

Q9300 2.5GHz / 1333FSB / 6MB-cache
P5K Premium WiFi rev2.0
Inno3D nVidia 8800GT 512Mb
500Gb SATAII
650w Atrix dual 12v rails
XClio Wind Tunnel Extreme Cooling case (with two 250mm fans)

Is the case enough to keep is cool?

**ChaosMinionX** · Apr 16, 2008, 01:08 PM

Quote:

Originally Posted by Conquerz

I've just got a Q9300 and want to know if I can overclock it to 3.0GHz with the stock cooler?

My spec:

Q9300 2.5GHz / 1333FSB / 6MB-cache
P5K Premium WiFi rev2.0
Inno3D nVidia 8800GT 512Mb
500Gb SATAII
650w Atrix dual 12v rails
XClio Wind Tunnel Extreme Cooling case (with two 250mm fans)

Is the case enough to keep is cool?

I advise against Overclocking with the stock cooler, but yes it is doable. I would aim for 430x7..... you got a low multi on that chip so it might be a little rough, but nothing that P5K cant handle thats for sure, but get better cooling for 24/7!!

Conquerz · Apr 16, 2008, 04:29 PM

Quote:

Originally Posted by ChaosMinionX

I advise against Overclocking with the stock cooler, but yes it is doable. I would aim for 430x7..... you got a low multi on that chip so it might be a little rough, but nothing that P5K cant handle thats for sure, but get better cooling for 24/7!!

Thanks for the reply. Yeh, its low multi... but im not that much into overclocking. This will be my first overclock. I'm only aiming to go as high as 3Ghz, and nothing more.
My case (Xclio wind tunnel) has excellent cooling. It has two massive 25cm fans, one blowing directly over the cpu/ram/pci and other on drive bays. Even on low settings, the case temps r very low.
DO you think this is enough for a 3ghz clock or do i still need a seperate cpu cooler?

What settings wud u recommend for a nice 3GHz overclock?

Thanks.

**ChaosMinionX** · Apr 16, 2008, 07:34 PM

Quote:

Originally Posted by Conquerz

Thanks for the reply. Yeh, its low multi... but im not that much into overclocking. This will be my first overclock. I'm only aiming to go as high as 3Ghz, and nothing more.
My case (Xclio wind tunnel) has excellent cooling. It has two massive 25cm fans, one blowing directly over the cpu/ram/pci and other on drive bays. Even on low settings, the case temps r very low.
DO you think this is enough for a 3ghz clock or do i still need a seperate cpu cooler?

What settings wud u recommend for a nice 3GHz overclock?

Thanks.

Separate cooler for sure! That intel cooler can only dissipate so much heat regardless of whats blowing on it, the surface area and thermal conduction just isnt there

Before I work out your BIOS settings for you, what kind of RAM do you have? And how much of it.

Conquerz · Apr 16, 2008, 10:30 PM

Quote:

Originally Posted by ChaosMinionX

Separate cooler for sure! That intel cooler can only dissipate so much heat regardless of whats blowing on it, the surface area and thermal conduction just isnt there

Before I work out your BIOS settings for you, what kind of RAM do you have? And how much of it.

I'm using 2Gb Corsair DDR2 800 (2x1Gb). Thanks for the advice about the cooler

.

**ChaosMinionX** · Apr 17, 2008, 12:01 AM

Quote:

Originally Posted by Conquerz

I'm using 2Gb Corsair DDR2 800 (2x1Gb). Thanks for the advice about the cooler

.

Got a specific part number? like TWIN2X yatta yatta.... or a link to where you bought them?

Conquerz · Apr 17, 2008, 10:33 AM

Quote:

Originally Posted by ChaosMinionX

Got a specific part number? like TWIN2X yatta yatta.... or a link to where you bought them?

Here's the CPU-Z screens:

Do those screen look right cos I ordered Corsair 800. SO why are they showing as 400?

BTW, the bios I'm using is 0504 for the P5K premium motherboard. This bios doesn't recognise the 45nm yorkfield processors yet. My multiplier for cpu is set to 6x when it should be 7.5x. There is a beta bios 0612 going around. Maybe I should try that.