|
|||||||
| Notices |
 |
|
|
LinkBack | Thread Tools |
Apr 3, 2003, 04:05 PM
|
#1 |
|
DriverHeaven Junior Member
Join Date: Mar 2003
Posts: 34
 |
A7N8X DX bios 1002a where's the Sync
i started out with the 1001g bios, i ran my ram in sync mode. but now after flash the sync option is no longer there. It has 100%, where Sync use to be. should i leave my ram in the two blue sync slots or what. My pc will handle a fsb of 185 with a multi of 12 with out breaken a sweat. I thats as high as i've gone for now. what do you think.
2700xp 9700 pro enrmax 465 a7n8x dx vr 1.04 corsair ex pc3200LL 512mg |
|
|
|
Apr 5, 2003, 10:43 AM
|
#2 |
|
DriverHeaven Extreme Member
|
Leave your mem at 100%; this is where you want it if you wanna run it insync with the fsb. Also if you want dual channels mode, put a stick in slot 1 and the other in either slot 2 or 3. I think with your ram you can try pushing it to 200fsb but you'll have to play around with the mem timings and voltages which can be a pain in the rear.
|
|
|
|
|
Apr 5, 2003, 03:20 PM
|
#3 |
|
DriverHeaven Junior Member
Join Date: Mar 2003
Posts: 34
|
Thanks
Ya i've played with a 200fsb but it would not boot to windows. I had my ram timings maxed out. I could mess with it some more, but i have the fsb at 185 with max timeings and my cpu reads 2.300 with a 2700xp. I droped the multiplyer down one notch. After uping my fsb my benchmark's are a little higher but i have'nt noticed any better video performce.
|
|
|
|
