|
|||||||
| Notices |
 |
|
|
LinkBack | Thread Tools | Display Modes |
Nov 6, 2007, 02:38 AM
|
#1 (permalink) |
|
DriverHeaven Addict
Join Date: Mar 2004
Posts: 263
 |
NV FX6600GT ultra DVI to Monitor problem
Hi all
i just bought a Samsung 931C LCD monitor and i get no signal when i connct it with the digital cable to the DVI connection on my 6600GT, with the analog connection i have no problems. i have the latest drivers installed and PC is up to date. what am i doing wrong? is there a setting i need to change on the NV control panel? Thanks  LZ.
__________________
P4 2.4C@3.2ghz | 4xGeil 256MB PC3200@2.5,4,4,8 | Thermaltake silent purepower 480W | ATI 9800 Pro 128mb (r350) + ATI Silencer #1 max@440/370 | Gigabyte GA-8IPE1000 Rev1.0 | SB Realtech AC97 Audio onboard | 2*IBM (120+80GB, 8mb Buffer)@7200rpm | WinXP Pro SP-1| DX 9.0c & UniAN 5.6| LG Flatron 775ft (17")@1024*768| aquamark03-> 52,306 | 6,561<-3dmark03 3Dprof - try it! |
|
|
|
Nov 6, 2007, 10:24 AM
|
#2 (permalink) |
|
DriverHeaven Addict
Join Date: Mar 2004
Posts: 263
|
i was told that i need too set through the driver control pannel in what method should the vid card transmit as each connection (dvi/analog) is assigned a diff port?
is there a way to do this from the driver control pannel? thanks
__________________
P4 2.4C@3.2ghz | 4xGeil 256MB PC3200@2.5,4,4,8 | Thermaltake silent purepower 480W | ATI 9800 Pro 128mb (r350) + ATI Silencer #1 max@440/370 | Gigabyte GA-8IPE1000 Rev1.0 | SB Realtech AC97 Audio onboard | 2*IBM (120+80GB, 8mb Buffer)@7200rpm | WinXP Pro SP-1| DX 9.0c & UniAN 5.6| LG Flatron 775ft (17")@1024*768| aquamark03-> 52,306 | 6,561<-3dmark03 3Dprof - try it! |
|
|
|
Linear Mode
