Pc won't boot please help!!!!!

gangsterant16 · Apr 17, 2005, 09:59 AM

Yes this morning i shut off the pc and i blew out all of the dust and when i plug everything bak in(i have a powersupply with a power switch on the back) nothing happens at all....So i cleared the bios with the jumper switches and everything turns on fans,powersupply but hard drive or cd drives won't boot so i disconnect them from the mobo and they work? strange but i really hope and think it can't be the motherboard broken i have a 480watt psu and a msi K8N Neo with namd 3200 wats going on help me please!!!!

O and once everything is on like i explained above and i try to shut it off by pressin the power switch infrong of my pc nothing happens i have to shut it off by the psu switch and that is also the way it turns on. I press the psu switch and everything boots but mobo please help!@!!

P.S i also hear no bios beeps and the light of the spdif on the built in sound card is bright red and stays on please somebody help me!

[hobo]eclipse · Apr 17, 2005, 10:16 AM

best thing prolly would be to completly unplug the power supply from the sysytem, power down the supply w/ the switch in the bak, unplug motherbard ATX connector, the molex for your drives and any fans, then clear the CMOS w/jumper, make sure to maybe give it like 10 mins with the jumper off, maybe even pull the lil round CMOS battery out while the jumper is off. then replug in all the pwr supply cables and replace the battery{be sure to put it in the right way},

? yer cpu cooler fan is it plugged into the mobo 4 power or directly into the PSU, if its plugged into the mobo and when u pwr up and nothing comes on but the fan is spinning yer mobo is getting power, then u can try to reseat yer RAM espesially and any other PCI AGP cards

just troubleshoot the basics cause blowin out yer CPU you clda blew a wire off or a jumper or sumtin, HD jumper for SATA enable?

gangsterant16 · Apr 17, 2005, 10:20 AM

i don't noe about the sata thanx for respondin, the cpu fan does power up its connected to the mobo any fan that i have that is connected to the motherboard turns on but it will not post and i can't shut off my pc

[hobo]eclipse · Apr 17, 2005, 10:27 AM

ya maybe then yank out all yer RAM and try to get it to post with only the 512 stik, wait first u said yer ROMs and HD wont "boot", do they even power on or no? if they wont power on then that yer PROB, u should be able to hear the HD spinnin and be able to open the ROMS up as soon as u pwr on weather or not the MB posts at all, but if theyr pwr'n on try the RAM reseat with only one stick and the Vid Card reseat, yer MOBO wont post if those 2 things r messed up. if after the reseat, replug of pwr sply and cmos clear, no post........

gangsterant16 · Apr 17, 2005, 10:46 AM

the hd boots only if there is no cable attached to them only if the power is attached to them
im really startin to think its the psu cause the mobo is getting power just not enough
the ram i tried with only one stick and still nothign and i did as u said still nothing so i think its the psu how about u

[hobo]eclipse · Apr 17, 2005, 10:53 AM

yup next on the list would have to be malfy harware, and yup pwer supply first, especailly if the HD is doin that, can u borrow one from any one, not a cheezy one though? u can also try yers with very minimal parts, u have alota case fans ?

gangsterant16 · Apr 17, 2005, 10:58 AM

i have on imma try it now thanx for all ur help man i appreciate it so much i will inform u what happen after i try ok

gangsterant16 · Apr 17, 2005, 12:37 PM

it was the power supply it works now it boots and everything but yes yes yes yes but if i try to change any thing in the bios it will not post so i have to clear the bios again for it 2 work now what!?

[hobo]eclipse · Apr 17, 2005, 12:54 PM

thats a lil too vague really, there r various bios settings, some that will inpact wheather or not a board will post and others that shouldnt matter

wat kinda psu u movin to i recomend a OCZ ModStream 520, they can be had 4 bout 100 dollars and an OCZ is almost definatly goin in my next sysyem.
U dont wanna temporarily fix the prob with a less than adaquate supply

gangsterant16 · Apr 17, 2005, 01:14 PM

i put a 420 psu in it that my mom had in her computer which is a amd 3200 xp and a gigabyte mobo with a corney nvidia geforce quardo card but it boots up fine it just won't let me save my settings in my bios and if i boot into windows i can't restart if i restart i have to clear my bios again so the only way i can do stuff is my shuting down which is very lame

gangsterant16 · Apr 17, 2005, 01:20 PM

i mean anything lil change in the bios won't work examples are change the time, or date, or boot sequence or disabling onboard sound any thing once i click on save settings and restart it restarts and will not post?

Also in core settings when it says to change the Ht multiplyer mine is on 4x default if i click on it to change it the pc freezes? wats goin on???

[hobo]eclipse · Apr 17, 2005, 01:38 PM

mmm..... did u try the battery trik, removin it and movin th bios jumper to completly clear out the bios, since u swaped pwr splys? maybe a failing battery? if its havin trouble keepin yer bios settings? maybe a bios update is in need?

gangsterant16 · Apr 17, 2005, 01:50 PM

i updated my bios to the newest release today after i couldn't update nothign and still nothing is letting me change it i took out the battery and cleard the cmos and still nothing i even put a spare battery i had and still nothing yo wth im so angry rite now i need help yo u been alot of help bro!!!!

[hobo]eclipse · Apr 17, 2005, 02:01 PM

ya i dunno, wat were ya usin to blow it out? can of air, or sumthin stronger like a compressor? i generally use a compressor but either stay a good foot and a half away from the parts or deflect the air off my hand, hopefully u didnt hurt yer board, but it def sounds like MB prob, although i guess it still might be a PWR SPLY thing. ima be out 4 awhile, but ill bb online l8r

jasonbourne · Apr 17, 2005, 02:09 PM

like hobo eclipse said try moving the bios jumper to completely clear out the bios,if it doesn't work try reinstalling windows.or maybe u got something wrong with ur motherboard.