|
|||||||
| Notices |
 |
|
|
LinkBack | Thread Tools | Display Modes |
Aug 12, 2006, 07:45 PM
|
#1 (permalink) |
|
DriverHeaven Addict
Join Date: Nov 2002
Location: Hillsboro, Oregon
Posts: 378
 |
Front panel connectors
I would like all Motherboard makers to embrace a version of ASUS Q-Connector. This is a small device, a little smaller than the connector on a floppy cable, that when installed, appears to be a riser for the front panel connections. It detaches from the board with the pins sticking out one side just like they do on the motherboard, and the other side has matching pin sockets. So it has pins and labels that allow you to easily connect your front panel connectors to the little riser, and then connect the whole bunch to the board. Easier to see, easier to manipulate. Front panel connectors can be a pain, but this really is helpful.
__________________
It has to be Plugged In? To electricity? Video cards in house, MSI HD 3870, ATI X1950 XTX, 1X1900 XTX, X1900 XT and X1900 Crossfire, ASUS and Sapphire X1800 XT's, X850 Pro, X800 Pro, AIW 9600XT, 9600 Pro, 9550 SE, 9200, 7000. XFX 6800 GS |
|
|
|
Aug 13, 2006, 04:43 PM
|
#3 (permalink) |
|
DriverHeaven Addict
Join Date: Nov 2002
Location: Hillsboro, Oregon
Posts: 378
|
http://http://usa.asus.com/999/images/products/1283/qconnector.jpg
Hope that works, if not it's on page below http://usa.asus.com/products4.aspx?l...83&modelmenu=1
__________________
It has to be Plugged In? To electricity? Video cards in house, MSI HD 3870, ATI X1950 XTX, 1X1900 XTX, X1900 XT and X1900 Crossfire, ASUS and Sapphire X1800 XT's, X850 Pro, X800 Pro, AIW 9600XT, 9600 Pro, 9550 SE, 9200, 7000. XFX 6800 GS |
|
|
|
)
Linear Mode
