bug reports for OS X driver 1.2b1

c62009 · Nov 28, 2008, 07:15 AM

Noise after ~1 hour of use, Tiger 10.4.11 / SB Live! 5.1 PCI based cards/10k1

It is better than 1.2B0 driver.

realplayer some of players is not sound!

c62009 · Nov 28, 2008, 07:19 AM

It is web of flash player , noise after 1 hours use

c62009 · Nov 28, 2008, 07:25 AM

Some time it is not sound! (KX SB0102 10K1[9400] pci card driver)

Russ · Nov 28, 2008, 07:30 AM

Quote:

Originally Posted by Oxtie

OK, I hear test signal sound in Analog Rear after connections (not headphones)

Sorry, I think you misunderstand... We want to know which connection does give sound to your headphones, so if the setup in the picture does not, then you should disconnect the connections between the 'vol' plugin and 'epilog', and make new connections to the next pair of pins on epilog that you want to test (i.e. LD Headphone pins, and if that gives no sound, then move to the next pair, etc).

Russ · Nov 28, 2008, 07:59 AM

Hmm, maybe I misunderstood your reply...

Quote:

Originally Posted by Oxtie

OK, I hear test signal sound in Analog Rear after connections (not headphones)

When you said "not headphones", did you mean that you did not get sound in your headphones (which is what I thought you meant), or did you mean the HP pins on epilog?

Quote:

Originally Posted by Oxtie

no other pair connections give me any sound. Only connection from vol to Rear gives sound... (checked all pairs available in epilog)

Connection from vol to rear gives sound where (headphones?, front speakers? rear speakers?)?

What is that status of the "Toggle Swap Front and Rear" option (if you are getting sound from the front or rear pins, then toggling that option should make a difference)?

Oxtie · Nov 28, 2008, 08:07 AM

Quote:

Originally Posted by Russ

Hmm, maybe I misunderstood your reply...

When you said "not headphones", did you mean that you did not get sound in your headphones (which is what I thought you meant), or did you mean the HP pins on epilog?

Connection from vol to rear gives sound where (headphones?, front speakers? rear speakers?)?

What is that status of the "Toggle Swap Front and Rear" option?

It gives sound to headphones ofcourse

and toggle swap front and read is ON. OK, since you mentioned Toggle, I turned it OFF and tried all the connections again, now the sound comes from analog Fonrt Left and Front Right (in the headphones ofcourse

)

EDIT: I remind you that the issue is 5.1 media not playing main voice (probably not mixing Front Left and Front right with others). Say more like converting 5.1 to 2.0 in realtime for stereo headphone.

Wait a min.... I think Front center plays the voices right? hold on.... I'll check something

Russ · Nov 28, 2008, 08:25 AM

OK, that makes more sense... When you said "not headphones", I misunderstood what you meant.

So, your Dell headphone jack uses the signal from analog front. So, as I said before, the behavior that you get when watching movies with OSX is expected (assuming that the front and rear are swapped by default with OSX and the default for Surrounder is some multi-speaker mode with Surround enabled).

i.e.
With the swapping enabled, rear signal goes to headphones... Regular stereo signals get copied to the rear, thus sounds normal.

Again, you should be able to correct this using kxctrl (or if OSX has another way to change the speaker mapping, that should work too).

As for the behavior you get with kX/Windows, that would require more testing (probably better done in another part of the forum (or by PM)).

Oxtie · Nov 28, 2008, 08:36 AM

Quote:

Originally Posted by Russ

OK, that makes more sense... When you said "not headphones", I misunderstood what you meant.

So, your Dell headphone jack uses the signal from analog front. So, as I said before, the behavior that you get when watching movies with OSX is expected (assuming that the front and rear are swapped by default with OSX and the default for Surrounder is some multi-speaker mode with Surround enabled).

i.e.
With the swapping enabled, rear signal goes to headphones... Regular stereo signals get copied to the rear, thus sounds normal.

Again, you should be able to correct this using kxctrl (or if OSX has another way to change the speaker mapping, that should work too).

As for the behavior you get with kX/Windows, that would require more testing (probably better done in another part of the forum (or by PM)).

Did you check my previous EDIT?
I've a feeling that front center is the problem, and if I mix front center (from surrounder to [(FrontL&R) or (RearL&R)] in epilog, I may get voices however, when I plug OFF headphones, surrounded sound will get spoiled... (in real 5.1 speakers as front center will sound from Front or Rear depending on Toggle switch).

In my case this prob applies to OSX too (though this part is going to be tricky without kx manger

) Anyways, I'll DEL off the extremely unrelated post later

EDIT: I remember To avoid confusion, Eugene changed driver to make speaker sound from right channel in OSX... (meaning remapping channels not required anymore)

Russ · Nov 28, 2008, 08:48 AM

With 5.1 content and headphones, Surrounder really should be using a 2.0 mode with Surround On (i.e. you want to downmix), otherwise you will always be missing some channels. If front and rear are swapped (and Surrounder is set to 5.1), you will be missing front and center, otherwise you will be missing rear and center.

You best bet with that (until kX for OSX allows more control of Surrounder settings) would be to downmix to 2.0 in software if possible, otherwise you probably would have to use kxctrl to modify some connections (and then you would have to redo them when not using headphones).

Quote:

Originally Posted by Oxtie

I've a feeling that front center is the problem, and if I mix front center (from surrounder to [(FrontL&R) or (RearL&R)] in epilog, I may get voices however, when I plug OFF headphones, surrounded sound will get spoiled... (in real 5.1 speakers as front center will sound from Front or Rear depending on Toggle switch).

Right, that would be the problem since the center channel only goes to the center output when Surrounder is set to 5.1 mode.

Quote:

EDIT: I remember To avoid confusion, Eugene changed driver to make speaker sound from right channel in OSX... (meaning remapping channels not required anymore)

Ahh, good to know. You mentioned that you thought it was the surround channels that you were hearing, thus I figured that the front and rear were swapped too. So then it is just an issue with the center channel (and it is expected behavior).

Oxtie · Nov 28, 2008, 09:10 AM

Quote:

Originally Posted by Russ

With 5.1 content and headphones, Surrounder really should be using a 2.0 mode with Surround On (i.e. you want to downmix), otherwise you will always be missing some channels. If front and rear are swapped (and Surrounder is set to 5.1), you will be missing front and center, otherwise you will be missing rear and center.

Yep, but appearently its not working for me... Shouldn't 5.1 media's (all 6 channels) suppose to get downmixed to 2.0? (in realtime for headphones by core driver)?... hmmm, also for Win version, my surround is ON still voices are out

Russ · Nov 28, 2008, 09:18 AM

Quote:

Originally Posted by Oxtie

Yep, but appearently its not working for me... Shouldn't 5.1 media's (all 6 channels) suppose to get downmixed to 2.0? (in realtime for headphones by core driver)?... hmmm, also for Win version, my surround is ON still voices are out

No, kX does not do this, you have to change Surrounder's settings manually when using headphones (the most kX does is mute the speakers when headphones are detected (and I think that only works with headphones connected to LD Headphone jack), it does not automatically reconfigure for headphones and downmix).

As for the Win version, is it set to 2.0 with Surround On (and VCenterA adjusted appropriately)?

Oxtie · Nov 28, 2008, 09:29 AM

Quote:

Originally Posted by Russ

No, kX does not do this, you have to change Surrounder's settings manually when using headphones (the most kX does is mute the speakers when headphones are detected (and I think that only works with headphones connected to LD Headphone jack), it does not automatically downmix).

As for the Win version, is it set to 2.0 with Surround On?

Hmmm, that would be odd logically, I mean who would actually want to set surround to 2.0 specially for headphones everytime? I see that kX does not mute speakers (which is fine) but if someone wants both speakers and headphones at the same time (i once had these moments), it will be difficult

Also, imagine the double setting users have to go through (one for setting surround to 2.0 and then 5.1 again after headphones are disconnected physically).

OK, 2.0 will give me sound (as said earlier) but its 5.1 that should be actually giving proper sound upon headphone detection (so kx manager interaction is reduced)

Russ · Nov 28, 2008, 09:35 AM

AFAIK, that has never been a feature of kX... (maybe Eugene would implement such a feature if asked (I guess using the 2.0 - Surround mix preset), but it would only work if kX can detect when headphones are connected, and as I said previously, I think the HP detection stuff only works (currently) with the LD headphone jack (with kX)).

As for using speakers and HP at same time, in your case, since the HP signal is the same as analog front, if it auto-downmixed, then it would get messed up anyway (i.e. your front speakers would get the mix too).

For people with a Live Drive (thus an independent HP jack), a custom DSP config can be used to downmix for the headphones only, if that is what is wanted.

Oxtie · Nov 28, 2008, 10:10 AM

Quote:

Originally Posted by Russ

AFAIK, that has never been a feature of kX... (maybe Eugene would implement such a feature if asked, but it would only work if kX can detect when headphones are connected, and as I said previously, I think the HP detection stuff only works (currently) with the LD headphone jack (with kX)).

As for using speakers and HP at same time, in your case, since the HP signal is the same as analog front, if it auto-downmixed, then it would get messed up anyway (i.e. your front speakers would get the mix too).

For people with a Live Drive (thus an independent HP jack), a custom DSP config can be used to downmix for the headphones only, if that is what is wanted.

kX surely detects headphones (icon shows up) Certainly, this is not hardcoded hardware that is mainly giving the analog front signal to headphones

(CT driver's default downmixing prooves that point). Hopefully future cool drivers (WIN & OSX) may solve something

Russ · Nov 28, 2008, 10:21 AM

Quote:

Originally Posted by Oxtie

Certainly, this is not hardcoded hardware that is mainly giving the analog front signal to headphones

Yes, that is exactly what it is... Normally if you do not have a Live Drive, that is where you would connect your headphones (analog front jack). You think it is bad having to open up Surrounder and change the preset... try reaching behind your computer, disconnecting your front speakers, and connecting the headphones every time you want to use headphones (luckily my headset includes a switch so that I do not need to do this, but many people do have to do this).

This does not mean that you cannot downmix to your headphones (of course you can), but you cannot send a separate signal to the front speakers.

Oxtie · Nov 28, 2008, 10:31 AM

Quote:

Originally Posted by Russ

You think it is bad having to open up Surrounder and change the preset... try reaching behind your computer, disconnecting your front speakers, and connecting the headphones every time you want to use headphones (luckily my headset includes a switch so that I do not need to do this, but many people do have to do this).

This does not mean that you cannot downmix to your headphones (of course you can), but you cannot send a separate signal to the front speakers.

Well, its a matter of convenience, CT drivers added it so that people who have the switch can make use of it

Its not that big problem, guess I'll use this workaround for long time then... (double setting that is hehe) but I still say it, if its automated, better (not like the world will stop spinning for me)

EDIT2: Just out of curiousity, I checked behind the sound card and I can't find any Mic IN

so there is only one for me!? the retail model shows it has mic IN (behind the card) mine has, FireWire + Digital Out + 7.1 anolog out (5 ports aka holes). Damn!

This is an OEM built card (thought it was same as retail)

Russ · Nov 29, 2008, 08:31 AM

Quote:

Originally Posted by Oxtie

Well, its a matter of convenience

Well of course it is

And, as I said before, maybe E. would add that feature if asked (who knows, maybe he had planned to do so at some point, but currently there really is no headphone specific preset).

Quote:

Originally Posted by Oxtie

EDIT2: Just out of curiousity, I checked behind the sound card and I can't find any Mic IN

so there is only one for me!? the retail model shows it has mic IN (behind the card) mine has, FireWire + Digital Out + 7.1 anolog out (5 ports aka holes). Damn!

This is an OEM built card (thought it was same as retail)

I assume that when you say "there is only one for me", that you mean only one input, and not "only one MIC input"?

In any case, it seems that with some Dell models, some jacks are shared, so you might want to check if that is the case with your card (i.e. on the Dell Audigy Advanced MB, it seems that Mic In is shared with the Side out (i.e. same jack, so it seems you cannot use both at the same time)).

<edit>
Regarding you reply (below), there is never a headphone jack on the rear of the card, as I said before, normally you need to use the analog front speaker jack for headphones, unless you have a Live Drive. The headphone output in kX only applies to the Live Drive headphone jack, thus nobody uses that output (normally) unless they have a Live Drive.
</edit>

<edit2>
Yes, Mic In is normally on the rear of the card, so it seems that your Dell model moved it to the front as a convenience thing, but either way, you only get 1 Mic In (unless (again) you have a Live Drive, which adds additional I/O's (i.e. Line2/Mic2, etc are Live Drive inputs)).
</edit2>

Oxtie · Nov 29, 2008, 01:24 PM

Quote:

Originally Posted by Russ

In any case, it seems that with some Dell models, some jacks are shared, so you might want to check if that is the case with your card (i.e. on the Dell Audigy Advanced MB, it seems that Mic In is shared with the Side out (i.e. same jack, so it seems you cannot use both at the same time)).

Forget about Mic, There is also no headphone hole behind

meaning the quick connection (like Mic and heaphones) can only be made through front side! Although its an intelligent move (thinking of putting IN/Out cables from behind) it renders "Headphones" mentioned in kX Manager useless?

my current headphone does not sound from headphones epilog anyways...

EDIT: oh... ok then

guess then I'm OK with that one... But I definately see mic in the rear for This Model (0350)

EDIT2: Watching movie is kind of cool thing to do in osx, I hope E has some solution to this aside from kx Manager trick (if it comes as win)

TheKezReturns · Nov 29, 2008, 07:47 PM

Ok, I tested all outputs on my 1820M's Audio dock for routing and level.
I ran logic on my hacky and on my MBP. The system volume on the hacky turned all the way up and input volume for the line in on the MBP all the way up. I inserted a test oscillator in logic set to 1K sine wave and tested all the core audio outputs to see where they came out of the dock. When I found the physical output, I slowly turned up the test oscillator volume unitl I got 0db on the input meters on the MBP

Here goes.

Core Audio 1/2 came out of Dock 1L/1R and S/PDIF and Headphones as expected. I only need -32db on the test oscillator to get 0db line level out of the analog jacks. S/PDIF mirrored the levels from output to input exactly.

Core Audio 3/4 -> Dock 3L/3R (swapped with CA 5/6) also -32 db

Core Audio 5/6 -> Dock 2L/2R also -32 db

Core Audio 7/8 didn't register on any of the outputs.

I also got no output from Dock 4L/4R no matter where I sent the osc.

**Eugene Gavrilov** · Dec 1, 2008, 11:34 PM

Kez,

Hmm.. that's a bit strange.. are you using consumer/unbalanced (-10dB) or pro/balanced (+4dU) connections?

try the following:

set your Mac to work with both SPDIF and analog-input
in your DAW on your mac choose left channel -> spdif left
right channel -> analog right
I guess, this setup will simplify all the tests

after that, ensure your 'Audio MIDI' levels are all set to 1.0 (0.0 dB)
after that, open Terminal and reset EDSP firmware:
edspctrl -reset

after that, switch your E-mu card to -10dB consumer mode:
kxctrl -sfpga 13 1f

or, if you are using +4dBU pro balanced mode,
kxctrl -sfpga 13 0

on my 1212m this works fine - all levels are OK and working correctly

default mode is +4dB, so, you may need to change this
create a script that launches edpsctrl -reset and kxctrl -sfpga 13 1f and add it to your startup script folder

E.

E.

TheKezReturns · Dec 1, 2008, 11:40 PM

Ok I'll try that.
It's just strange that the levels are normal in windows... did you see my earlier post?

Oxtie · Dec 2, 2008, 06:05 AM

Eugene? do you have any comments on this? I mean "no voices in headphones @ 5.1" issue of mine? Think about it, its weird changing speaker modes from kX Manager everytime just to switch headphones

If OSX version becomes somewhat better in this,

Lu Yea!

EDIT: you have one "thank you" @ INF (and one unusual mute with EMU series @ p20 + p21)

djsubject · Dec 2, 2008, 06:23 AM

Quote:

Originally Posted by Eugene Gavrilov

Kez,

create a script that launches edpsctrl -reset and kxctrl -sfpga 13 1f and add it to your startup script folder

E.

E.

Hmmm, must learn scripts!! any tips on how to add that to a script?

djsubject · Dec 3, 2008, 07:18 AM

Quote:

Originally Posted by Oxtie

not here, I'll pm some infos but be sure that writing these scripts are best described from google results

so far i managed to learn how to unmount drives at start-up!

i think i'm ok

i edited a .ini to edspctrl[enter]

put it in the dock, automated that being run, then closing it after load, (i just recorded me opening it & closing it) saved that as a app, made the app load at startup,

so now i boot, then terminal loads with edspctrl, then closes after firmware load

if you edit a .ini file (open it in text editor) to the command you want, then press enter, then save it, it will run the terminal process just by double clicking it

being lazy i used automator to run & close it,

PS, in my ini i put edspctrl -reset, as it will load from no firmware aswell as doing the reset (as i said i'm lazy)

DJ

Oxtie · Dec 3, 2008, 12:57 PM

Sun VirtualBOX 2.06 Error: HostAudioNotResponding
VirtualBox is a PC Emulator for Mac (allows Windows on MacOSX).

ahthree · Dec 5, 2008, 11:54 AM

distortion after about 1hour 30minute on my ct4760
thanks for your work!
however,this version is better than 1.1b !

TheKezReturns · Dec 7, 2008, 05:26 PM

Quote:

set your Mac to work with both SPDIF and analog-input

I can't actually do that at the moment as on the MBP it's dual function optical/analog line in jack so you can only use one at a time.

Quote:

after that, switch your E-mu card to -10dB consumer mode:
kxctrl -sfpga 13 1f

This didn't make very much difference in the volume.

As a side note, this was never a problem in windows with emu drivers or even KX.
I had a good range from very quiet to nice and loud.

With KX in osx it's like sound off-> too loud - > way too loud

Could it be a linear / log scale thing?

killdos · Dec 8, 2008, 06:16 PM

there is no any input devices
anyway, thanks a lot for your work!

mahhanan · Dec 13, 2008, 11:42 AM

HI.

With a sb audigy 4 the same problem. It have not mic input. The sound is ok with 5.1 analog.

P5K deluxe wifi
GF 8800GTS
Audigy 4
Core Duo 2 6600

Oxtie · Dec 15, 2008, 02:01 PM

A Core i7 system related issue with kX 5.1 multichannel for Eugene here

Nov 28, 2008, 07:15 AM	#31
c62009 DriverHeaven Newbie Join Date: Nov 2008 Posts: 3 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 Noise after ~1 hour of use, Tiger 10.4.11 / SB Live! 5.1 PCI based cards/10k1 It is better than 1.2B0 driver. realplayer some of players is not sound!

Nov 28, 2008, 07:19 AM	#32
c62009 DriverHeaven Newbie Join Date: Nov 2008 Posts: 3 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 It is web of flash player , noise after 1 hours use

Nov 28, 2008, 07:25 AM	#33
c62009 DriverHeaven Newbie Join Date: Nov 2008 Posts: 3 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 Some time it is not sound! (KX SB0102 10K1[9400] pci card driver)

Nov 28, 2008, 08:25 AM	#37
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,836 Rep Power: 41	Re: bug reports for OS X driver 1.2b1 OK, that makes more sense... When you said "not headphones", I misunderstood what you meant. So, your Dell headphone jack uses the signal from analog front. So, as I said before, the behavior that you get when watching movies with OSX is expected (assuming that the front and rear are swapped by default with OSX and the default for Surrounder is some multi-speaker mode with Surround enabled). i.e. With the swapping enabled, rear signal goes to headphones... Regular stereo signals get copied to the rear, thus sounds normal. Again, you should be able to correct this using kxctrl (or if OSX has another way to change the speaker mapping, that should work too). As for the behavior you get with kX/Windows, that would require more testing (probably better done in another part of the forum (or by PM)).

Nov 28, 2008, 09:35 AM	#43
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,836 Rep Power: 41	Re: bug reports for OS X driver 1.2b1 AFAIK, that has never been a feature of kX... (maybe Eugene would implement such a feature if asked (I guess using the 2.0 - Surround mix preset), but it would only work if kX can detect when headphones are connected, and as I said previously, I think the HP detection stuff only works (currently) with the LD headphone jack (with kX)). As for using speakers and HP at same time, in your case, since the HP signal is the same as analog front, if it auto-downmixed, then it would get messed up anyway (i.e. your front speakers would get the mix too). For people with a Live Drive (thus an independent HP jack), a custom DSP config can be used to downmix for the headphones only, if that is what is wanted. Last edited by Russ; Nov 28, 2008 at 09:54 AM.

Nov 29, 2008, 07:47 PM	#49
TheKezReturns DriverHeaven Lover Join Date: Apr 2005 Location: Gold Coast Australia Posts: 115 Rep Power: 28	Re: bug reports for OS X driver 1.2b1 Ok, I tested all outputs on my 1820M's Audio dock for routing and level. I ran logic on my hacky and on my MBP. The system volume on the hacky turned all the way up and input volume for the line in on the MBP all the way up. I inserted a test oscillator in logic set to 1K sine wave and tested all the core audio outputs to see where they came out of the dock. When I found the physical output, I slowly turned up the test oscillator volume unitl I got 0db on the input meters on the MBP Here goes. Core Audio 1/2 came out of Dock 1L/1R and S/PDIF and Headphones as expected. I only need -32db on the test oscillator to get 0db line level out of the analog jacks. S/PDIF mirrored the levels from output to input exactly. Core Audio 3/4 -> Dock 3L/3R (swapped with CA 5/6) also -32 db Core Audio 5/6 -> Dock 2L/2R also -32 db Core Audio 7/8 didn't register on any of the outputs. I also got no output from Dock 4L/4R no matter where I sent the osc. __________________ Dual Boot Hacky XP / OSX /Ubuntu. 2.13 C2D. 4 Gb DDR2. Intel DG965RY. EMU 1820M / TC Konnekt 24D / MOTU Ultralite mk3

Dec 1, 2008, 11:34 PM	#50
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,037 Rep Power: 56	Îòâåò: Re: bug reports for OS X driver 1.2b1 Kez, Hmm.. that's a bit strange.. are you using consumer/unbalanced (-10dB) or pro/balanced (+4dU) connections? try the following: set your Mac to work with both SPDIF and analog-input in your DAW on your mac choose left channel -> spdif left right channel -> analog right I guess, this setup will simplify all the tests after that, ensure your 'Audio MIDI' levels are all set to 1.0 (0.0 dB) after that, open Terminal and reset EDSP firmware: edspctrl -reset after that, switch your E-mu card to -10dB consumer mode: kxctrl -sfpga 13 1f or, if you are using +4dBU pro balanced mode, kxctrl -sfpga 13 0 on my 1212m this works fine - all levels are OK and working correctly default mode is +4dB, so, you may need to change this create a script that launches edpsctrl -reset and kxctrl -sfpga 13 1f and add it to your startup script folder E. E.

Dec 1, 2008, 11:40 PM	#51
TheKezReturns DriverHeaven Lover Join Date: Apr 2005 Location: Gold Coast Australia Posts: 115 Rep Power: 28	Re: Îòâåò: Re: bug reports for OS X driver 1.2b1 Ok I'll try that. It's just strange that the levels are normal in windows... did you see my earlier post? __________________ Dual Boot Hacky XP / OSX /Ubuntu. 2.13 C2D. 4 Gb DDR2. Intel DG965RY. EMU 1820M / TC Konnekt 24D / MOTU Ultralite mk3

Dec 2, 2008, 06:05 AM	#52
Oxtie DriverHeaven Lover Join Date: May 2008 Posts: 127 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 Eugene? do you have any comments on this? I mean "no voices in headphones @ 5.1" issue of mine? Think about it, its weird changing speaker modes from kX Manager everytime just to switch headphones If OSX version becomes somewhat better in this, Lu Yea! EDIT: you have one "thank you" @ INF (and one unusual mute with EMU series @ p20 + p21) __________________ Oxtie (aka Lama) (My InsanelyMac Thread) DELL XPS G5 \| JaS CS P4 \| 5 GB RAM \| nVIDIA GF6800 \| AUDIGY 2 ZS 035x \| BC5657 ETH \| 16x DVD-R \| IDE IBM 80GB \| SATA 250 GB Last edited by Oxtie; Dec 7, 2008 at 01:48 PM.

Dec 5, 2008, 11:54 AM	#56
ahthree DriverHeaven Newbie Join Date: Dec 2008 Posts: 1 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 distortion after about 1hour 30minute on my ct4760 thanks for your work! however,this version is better than 1.1b !

Dec 8, 2008, 06:16 PM	#58
killdos DriverHeaven Newbie Join Date: Dec 2008 Posts: 1 Rep Power: 0	Îòâåò: bug reports for OS X driver 1.2b1 there is no any input devices anyway, thanks a lot for your work! __________________ iDeneb v1.3 10.5.5 CPU: Athlon 64 3700+ (San Diego) MB: ASUS A8N-E mem: 2Gb DDR400 HD: Hitachi HDS721680PLAT80 PATA HD: 2xSeagate ST3120026AS SATA Video: GeForce 6600 128Mb Audio: Creative SBLive! 5.1 SB0220 DVD-R/RW: SONY Optiarc DVD RW AD-5200A PATA

Dec 13, 2008, 11:42 AM	#59
mahhanan DriverHeaven Newbie Join Date: Nov 2008 Posts: 2 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 HI. With a sb audigy 4 the same problem. It have not mic input. The sound is ok with 5.1 analog. P5K deluxe wifi GF 8800GTS Audigy 4 Core Duo 2 6600

Dec 15, 2008, 02:01 PM	#60
Oxtie DriverHeaven Lover Join Date: May 2008 Posts: 127 Rep Power: 0	Re: bug reports for OS X driver 1.2b1 A Core i7 system related issue with kX 5.1 multichannel for Eugene here __________________ Oxtie (aka Lama) (My InsanelyMac Thread) DELL XPS G5 \| JaS CS P4 \| 5 GB RAM \| nVIDIA GF6800 \| AUDIGY 2 ZS 035x \| BC5657 ETH \| 16x DVD-R \| IDE IBM 80GB \| SATA 250 GB

LinkBacks (?) LinkBack to this Thread: http://www.driverheaven.net/mac-os-x-driver/173384-bug-reports-os-x-driver-1-2b1.html
Posted By	For	Type	Date
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Oct 3, 2009 02:15 AM
Emu 1212m PCI ? Logic 8.02 - AppleLife. AppleLife: ??? ?? Apple, ?????????? ? ???????? Macintosh, iMac, iPod, iPhone 3G, Mac OS - ??????? ? ??????????	This thread	Refback	Sep 29, 2009 09:07 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 28, 2009 07:18 AM
Éù¿¨Çý¶¯ ->Creative´´ÐÂ->Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2//Audigy4/X-Fi/e-dspÏµÁÐÉù¿¨ÐÞ¸Ä°æÇý¶¯-Çý¶¯¸ß¼¶²éÑ¯Ïòµ¼-Çý¶¯Ö®¼Ò	This thread	Refback	Sep 17, 2009 01:44 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 14, 2009 03:09 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 13, 2009 07:11 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 7, 2009 05:33 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 4, 2009 09:19 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 3, 2009 01:02 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Sep 2, 2009 03:06 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 25, 2009 06:14 AM
TorrentMac - Ðóññêîÿçû÷íûé MAC - òðåêåð	This thread	Refback	Aug 23, 2009 08:46 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 15, 2009 10:02 AM
InsanelyMac Forum > Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here!	This thread	Refback	Aug 9, 2009 05:58 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 9, 2009 05:44 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 8, 2009 12:21 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 5, 2009 02:14 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 4, 2009 04:26 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 2, 2009 02:56 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Aug 1, 2009 02:14 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jul 31, 2009 05:46 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jul 31, 2009 12:56 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jul 27, 2009 06:48 AM
InsanelyMac Forum > Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here!	This thread	Refback	Jul 24, 2009 12:08 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jul 24, 2009 08:52 AM
AppleLife: Âñå îá Apple, êîìïüþòåðû è íîóòáóêè Macintosh, iMac, iPod, iPhone 3G, Mac OS - íîâîñòè è îáñóæäåíèÿ. nelepos - Ïðîñìîòð ïðîôèëÿ.	This thread	Refback	Jul 8, 2009 07:26 PM
Éù¿¨Çý¶¯ ->Creative´´ÐÂ->Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2//Audigy4/X-Fi/e-dspÏµÁÐÉù¿¨ÐÞ¸Ä°æÇý¶¯-Çý¶¯¸ß¼¶²éÑ¯Ïòµ¼-Çý¶¯Ö®¼Ò	This thread	Refback	Jul 5, 2009 09:15 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jun 23, 2009 04:20 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Jun 19, 2009 04:45 AM
Éù¿¨Çý¶¯ ->Creative´´ÐÂ->Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2//Audigy4/X-Fi/e-dspÏµÁÐÉù¿¨ÐÞ¸Ä°æÇý¶¯-Çý¶¯¸ß¼¶²éÑ¯Ïòµ¼-Çý¶¯Ö®¼Ò	This thread	Refback	Jun 8, 2009 06:45 AM
Éù¿¨Çý¶¯->Creative´´ÐÂ->Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2//Audigy4/X-Fi/e-dspÏµÁÐÉù¿¨ÐÞ¸Ä°æÇý¶¯-Çý¶¯¸ß¼¶²éÑ¯Ïòµ¼-Çý¶¯Ö®¼Ò	This thread	Refback	Jun 4, 2009 12:21 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	May 9, 2009 12:39 PM
ÏÂÔØ£º´´ÐÂÉù¿¨1.2b1 BETA°æÇý¶¯For MAC - Éù¿¨Çý¶¯ÌÖÂÛÇø - Çý¶¯Ö®¼ÒÉçÇø MyDrivers BBS - Powered by Discuz!	This thread	Refback	Apr 15, 2009 06:35 AM
OSX86 Brasil: Outubro 2008	This thread	Refback	Mar 31, 2009 07:18 PM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Mar 28, 2009 11:11 PM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Mar 26, 2009 12:17 PM
TorrentMac - Ðóññêîÿçû÷íûé MAC - òðåêåð	This thread	Refback	Mar 26, 2009 11:50 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Mar 16, 2009 05:51 PM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Mar 12, 2009 04:31 AM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Mar 7, 2009 06:21 PM
???????1.2b1 BETA???For MAC - Windows???? Drivers update - Windows based - XFastest Media & Forum	This thread	Refback	Mar 5, 2009 11:16 PM
ÏÂÔØ£º´´ÐÂÉù¿¨1.2b1 BETA°æÇý¶¯For MAC - Éù¿¨Çý¶¯ÌÖÂÛÇø - Çý¶¯Ö®¼ÒÉçÇø MyDrivers BBS - Powered by Discuz!	This thread	Refback	Mar 5, 2009 11:03 PM
Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2/e-dspÏµÁÐÉù¿¨×îÐÂkXÇý¶¯1.2b1 BETA°æFor MAC_´´ÐÂ(Creative)_Éù¿¨Çý¶¯_Çý¶¯ÏÂÔØ_ÌìÐÂÍø	This thread	Refback	Feb 18, 2009 03:58 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Feb 8, 2009 08:42 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Feb 7, 2009 05:12 PM
Creative SB [Live!, Audigy, Audigy2, EMU10kX eDSPs] OSX Driver info here! - InsanelyMac Forum	This thread	Refback	Feb 6, 2009 04:16 PM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Feb 5, 2009 06:15 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Feb 3, 2009 09:44 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Jan 20, 2009 03:58 AM
OSX86 Brasil: SoundBlaster logo logo possível no OSX	This thread	Refback	Jan 15, 2009 12:51 PM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Jan 15, 2009 02:56 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Dec 30, 2008 02:42 AM
Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2/e-dspÏµÁÐÉù¿¨×îÐÂkXÇý¶¯1.2b1 BETA°æFor MACÏÂÔØ ¡ª ´å´åÇý¶¯Íø	This thread	Refback	Dec 2, 2008 09:48 AM
Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2/e-dspÏµÁÐÉù¿¨kXÇý¶¯ 1.2b1 BETA°æ ÏêÏ¸½éÉÜ\| PChome ÏÂÔØÖÐÐÄ	This thread	Refback	Dec 1, 2008 12:00 AM
Éù¿¨Çý¶¯ÏÂÔØ,ÍòÄÜÉù¿¨Çý¶¯,ÍòÄÜÉù¿¨Çý¶¯ÏÂÔØ,AC97Éù¿¨Çý¶¯,AC97Éù¿¨Çý¶¯ÏÂÔØ,Éù¿¨Çý¶¯³ÌÐò,Ó²¼þÇý¶¯ÏÂÔØ	This thread	Refback	Nov 30, 2008 11:35 AM
Éù¿¨Çý¶¯,Éù¿¨Çý¶¯ÏÂÔØ,ÍòÄÜÇý¶¯,ÍòÄÜÉù¿¨Çý¶¯__Çý¶¯ÏÂÔØ	This thread	Refback	Nov 28, 2008 10:21 PM
Éù¿¨Çý¶¯ÏÂÔØ,ÍòÄÜÉù¿¨Çý¶¯,ÍòÄÜÉù¿¨Çý¶¯ÏÂÔØ,AC97Éù¿¨Çý¶¯,AC97Éù¿¨Çý¶¯ÏÂÔØ,Éù¿¨Çý¶¯³ÌÐò,Ó²¼þÇý¶¯ÏÂÔØ	This thread	Refback	Nov 25, 2008 09:43 PM
Creative Idea´´ÐÂÈñCreative´´ÐÂÉù¿¨Çý¶¯,Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2/e-dspÏµÁÐÉù¿¨×îÐÂkXÇý¶¯1.2b1 BETA°æFor MAC,Éù¿¨Çý¶¯,Ó²¼þÇý¶¯ÏÂÔØ	This thread	Refback	Nov 25, 2008 06:16 AM
Éù¿¨Çý¶¯Çý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Nov 24, 2008 09:36 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Nov 24, 2008 07:29 AM
CreativeÉù¿¨Çý¶¯ CreativeÇý¶¯ Çý¶¯Ö®¼Ò-Çý¶¯·ÖÀà²éÑ¯	This thread	Refback	Nov 24, 2008 05:01 AM
ÐÂÎÅÖÐÐÄ ¡ª¡ªÇý¶¯Ö®¼Ò£ºÄúÉí±ßµÄÓ²¼þ×¨¼Ò	This thread	Refback	Nov 24, 2008 02:15 AM
ÏÂÔØ£º´´ÐÂÉù¿¨1.2b1 BETA°æÇý¶¯For MAC-MAC ´´ÐÂ-Çý¶¯Ö®¼Ò	This thread	Refback	Nov 24, 2008 02:05 AM
Creative´´ÐÂSound Blaster Live/Live 5.1/Audigy/Audigy 2/e-dspÏµÁÐÉù¿¨×îÐÂkXÇý¶¯1.2b1 BETA°æ Éù¿¨Çý¶¯ ´´ÐÂ Çý¶¯Ö®¼Ò	This thread	Refback	Nov 23, 2008 11:25 PM
ÏÔÊ¾¿¨\|Éù¿¨\|±Ê¼Ç±¾\|ÊýÂë\|BIOS ×îÐÂÇý¶¯¸üÐÂ-Çý¶¯Ö®¼Ò	This thread	Refback	Nov 23, 2008 10:19 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bug reports for OS X driver 1.2b0	Eugene Gavrilov	MAC OS X Driver	40	Dec 31, 2008 10:41 AM
3541 bug reports	Eugene Gavrilov	Bug Reports	106	Jul 28, 2008 01:13 AM
3538l bug reports	Eugene Gavrilov	Bug Reports	66	Jan 7, 2007 10:00 PM
3538k bug Reports	dj_stick	Bug Reports	12	Dec 17, 2006 02:00 PM
3538i bug reports	Eugene Gavrilov	Bug Reports	98	Jan 21, 2006 02:23 PM