Gfx card prob?

danjufo · Nov 3, 2006, 01:45 PM

Got a computer that when it gets to booting windows says 'no input' on my monitor and auto restarts, i've tried loading it in safe mode and does the same thing. It goes through bios and displays the loading windows screen and then goes... is there anything i can try other than a different gfx card (i dont have a PCI-E to try)

thanks.

niceguyrichy · Nov 3, 2006, 01:48 PM

if it gets that far it's probably not the gfx card, try swapping out the memory , trying only one stick at a time etc and see if you get anywhere.

danjufo · Nov 3, 2006, 01:59 PM

thanks i shall

+ top marks for fast reply!

Dyre Straits · Nov 3, 2006, 02:45 PM

Is the card properly plugged into the PCIe 6-pin power cord? Sounds to me like the card isn't getting any power.

BlueMak · Nov 3, 2006, 03:18 PM

Try going into bios settings and load the default settings (just make sure you either save or write down your current settings) and then if the problem remains, load the optimal settings. A friend of mine had a PC with a similar problem (well sounds similar anyway) that fixed it with that.

Also, have you tried loading safe mode?

PangingJr · Nov 3, 2006, 03:44 PM

No input signal
http://groups.google.com/groups/sear...o+input+signal

No signal input
http://groups.google.com/groups/sear...o+signal+input