redocneXk released - Realtime 5.1 ac3 Encoder

JPSelter · Aug 31, 2007, 03:21 PM

I have Windows XP, X-Fi with latest X-Fi drivers and redocneXk 1.08:

Is there any way to set the ASIO frequency to 48khz? When I start the tool it says:

ASIOGetSampleRate: 44100 Hz

The Creative drivers though say "48000 Hz", why does the tool detect a different sample rate? The result is a stuttering sound that has a higher key than normal.

The GUI version does not work at all. It crashes the most time.

JPSelter · Aug 31, 2007, 03:57 PM

I got it to work in 48khz. I had to change from the Gaming to the Audio Creation Console and test it there. After I switched back to Gaming (I need Gaming because I need the base redirection / base enhancer) it was finally set to 48khz. But what happened here? The sound quality is really bad. The base is missing as if I would record the sound with a mikrophone in front of the speakers. Ok, nothing else does "what you hear" inside the recording options? Or what am I doing wrong now?

Nom · Sep 3, 2007, 02:35 PM

Anyone having problems with this software encoding, should note that Creative Labs sell a realtime hardware encoder : http://uk.europe.creative.com/shop/p...p?product=1114

Works well with any soundcard !

Tril · Oct 30, 2007, 07:18 PM

I released a new version. It's version 1.09. There was a bug in 1.08. The -o switch to choose the output device did not work. This switch especialy useful in Vista because you need to choose the output device called SPDIF if you want to use a Creative card SPDIF output.

I may have fixed other bugs and forgotten to note them.

Ghozer · Nov 26, 2007, 10:40 AM

Hey, im having some trouble with this...

my decoder is switching Analogue/Digital and back again, and so-on, every 1/2 second, so its causing a popping sound..

here's the output...

Quote:

*** Settings ***
Driver = 0 (Creative ASIO)
Mode = X-Fi with Creative drivers (auto-detection)
FL = asio 2 + asio 8
FR = asio 3 + asio 9
RL = asio 4 + asio 8
RR = asio 5 + asio 9
C = asio 6
LFE = asio 7
Bitrate = 640000
Renderer = 0
Output Device = -1 - Microsoft Sound Mapper
Priority = Realtime priority
Latency = 1
hideConsole = CTRL + ALT + key 9
showConsole = CTRL + ALT + key 0
Volume = 100

*** Information ***
asioVersion: 0
driverVersion: 2
Name: SB X-Fi ASIO [B000]
ErrorMessage: No ASIO Driver Error
ASIOGetChannels (inputs: 10);
ASIOGetBufferSize (min: 44, max: 32768, preferred: 2200, granularity: 8);
ASIOGetSampleRate (sampleRate: 44100.000000);
ASIOOutputReady(); - Supported
ASIOGetLatencies (input: 2300);

*** Status ***
ASIO Driver started successfully.

im using the Creative X-Fi drivers from the Creative website, playing DVD's works using SPDif Pass-Through with audio console set to "BitStream Out (external decoder)"

its really bitty, breaks up, and stutters alot...., and when i do hear some sound, the pitch is incresed...

Tril · Nov 26, 2007, 11:43 AM

The asio samplerate is showing 44100. It should be 48000, otherwise it won't work. There's a setting somewhere in the X-Fi console where you can set this.

Ghozer · Nov 27, 2007, 06:41 PM

I have 48Khz or 96khz options, its set to 48khz... I have also tried 96khz and its still the same...

Tril · Nov 28, 2007, 12:46 AM

Sorry, I don't know what's the problem. I don't have an X-Fi myself so I could never fully test the app with it. It could be an X-Fi specific problem or not.

Ghozer · Nov 28, 2007, 06:55 AM

well im willing to provide any screenshots, logs, and do any tests you want... just let me know..

Armored · Dec 1, 2007, 11:10 PM

I have a problem where the audio skipps or gives a loud feedback when i run redocneXk 1.09 or the the gui verson

my settings are:

redocneXk v1.09
The avcodec library is licensed under the LGPL.
See the included lgpl.txt file for a copy of the LGPL license.
ASIO Interface Technology by Steinberg Media Technologies GmbH
redocneXk is in no way affiliated, associated or connected with
Creative Technology Inc.

*** Settings ***
Driver = 0 (kX ASIO)
Mode = kX ASIO (auto-detection)
FL = asio 0
FR = asio 1
RL = asio 2
RR = asio 3
C = asio 4
LFE = asio 5
Bitrate = 640000
Renderer = 0
Output Device = -1 - Microsoft Sound Mapper
Priority = Realtime priority
Latency = 1
hideConsole = CTRL + ALT + key 9
showConsole = CTRL + ALT + key 0
Volume = 100
*** Information ***
asioVersion: 0
driverVersion: 3537
Name: kX ASIO SB0350 10k2 [9c00]
ErrorMessage: No ASIO Driver Error
ASIOGetChannels (inputs: 16);
ASIOGetBufferSize (min: 256, max: 256, preferred: 256, granularity: 0);
ASIOGetSampleRate (sampleRate: 48000.000000);
ASIOOutputReady(); - Not supported
ASIOGetLatencies (input: 256);
*** Status ***
ASIO Driver started successfully.
Press Q to quit.

my specs are:

kXproject 5.10.0.3537 drivers
Audigy 2 ZS Platinum
Windows xp sp2 everythings updated

2.1 sound works fine without it running, could it be something to do with the kX DSP setup, reading your readme file it says

Audigy/Audigy2 on Creative drivers mode :
FL = asio 4 + asio 12
FR = asio 5 + asio 13
RL = asio 6 + asio 12 + asio 10
RR = asio 7 + asio asio 13 + asio 11
C = asio 8
LFE = asio 9

should the kX dsp reflect that? and put lines from the surrounder to the asioX ones?

Thank you for your work

Tril · Dec 2, 2007, 01:06 AM

Armored, you need to change the DSP when using the kX drivers. There's a picture in the first post showing that you need to connect Surrounder to asio 0, 1, 2, 3, 4, 5.

I think you'll get feedback if digital only output is not activated.

You are not using "Audigy/Audigy2 on Creative drivers mode". You are using the kX ASIO mode.

Armored · Dec 2, 2007, 12:58 PM

i do have it set up just like the picture shows in your first post, asio0 to asio 5 is connected to the surrounder. digital output is enabled and i have a cable from my soundcards digital output to my amp.

well to discribe the feedback it was more like the sound of snow you get from old tvs when you didnt have the cable plugged into it. but i dont seem to get that anymore, the gui no longer does anything but the 1.09 still makes small caps of science in the sound playing.

by this combo of kXdrivers and your redocneXk app i will get 5.1 from games like half life 2 right?

Thank you for the fast reply

Russ · Dec 2, 2007, 01:12 PM

@Armored
It says that you are using 3537, you might consider trying 3538m or 3539 (there have been many updates since 3537).

Armored · Dec 2, 2007, 01:17 PM

oh i didnt know there were newer ones, his site only had 3537. i will try that out, thank you

Armored · Dec 2, 2007, 02:03 PM

i installed the 3539 drivers but now theres no gaps of silence it just clicks back and forth between DD and PCM with no sound.

Russ · Dec 2, 2007, 06:40 PM

Have you tried different latency settings in the ASIO Control Panel?

Does AC3 Passthru itself work correctly for you (i.e. playing AC3 content without redocneXk)?

Armored · Dec 2, 2007, 08:34 PM

i have tried all the letency settings.

im guessing if AC3 files arent coming up on the amp as DD the passthou isnt working then...

Russ · Dec 2, 2007, 08:54 PM

Quote:

Originally Posted by Armored

im guessing if AC3 files arent coming up on the amp as DD the passthou isnt working then...

But did you try playing an actual AC3 file or DVD, etc? or are you just going by the results from using redocneXk?

i.e.
AC3 passthrough is seperate from redocneXk, so I wanted to try and determine whether it is an AC3 passthru issue (maybe it is somehow not configured correctly), or a problem with redocneXk (which could be config issues, or ASIO issues, etc).

In other words, make sure that you get AC3 passthru working correctly before trying to use it with redocneXk.

Armored · Dec 2, 2007, 09:54 PM

ahh ok, well dvd do pass through dts and dd (played o brother where arnt thou) but ac3 files do not, (avi movie with ac3)

Tril · Dec 2, 2007, 10:07 PM

If DVD spdif output to output dd digitally works, it should also work with redocneXk. I'll try to think about it some more.

Try to add "Vol" plugins in the kX DSP between Surrounder and epilog to reduce the volume entering the ASIO inputs in epilog. It's possible that the volume is too high for the encoder.

Russ · Dec 2, 2007, 10:15 PM

Ok, if the DVD is working then it seems that AC3 passthru is OK, but here is an small AC3 file you can try (just to be sure):
http://www.lynnepublishing.com/surro...round_test.ac3

You should be able to play it in your DVD software (i.e. I can play it in PowerDVD). Make sure that the software is set to output to SPDIF, etc.

As far as redocneXk goes:
CPU utilization can effect ASIO performance (if ASIO performance is bad, redocneXk will not work well), so make sure you are trying out something simple first (as opposed to some game that may use a lot of CPU power, etc). i.e. Try playing an mp3 (or whatever) and let redocneXk encode that (it doesn't have to be 5.1 audio, as you just want to see if it works without problems, etc).

Armored · Dec 2, 2007, 10:40 PM

ummm interesting, the DD lights up on my amp but rear left and right are playing on my front left and right speakers.. i do have spdif set to output on in powerdvd

redocneXk will keep the dd on my amp on untill any sound comes on like msns chime or a mp3

my specs are
Windows xp sp2
amd x64 x2 6000
asus m2n sli deluxe
3 gbs ram

im about to add vol thing to the dsp now

Russ · Dec 2, 2007, 10:57 PM

Quote:

Originally Posted by Armored

ummm interesting, the DD lights up on my amp but rear left and right are playing on my front left and right speakers..

Is Surrounder set to 2.1 mode? It should be set to 5.1 mode.

Armored · Dec 2, 2007, 10:57 PM

and the vol in dsp has no effect with the vol at 25

Armored · Dec 2, 2007, 10:59 PM

it is set to 5.1 - movie mode

what does Scenter2 do? its set to asio7

Russ · Dec 2, 2007, 11:09 PM

Do you have regular speakers connected to the Soundcard? If so, if you disable AC3 passthru, and let kX decode the AC3 stream, does it play to the correct speakers (taking into account kX's "Toggle Swap Front and Rear" setting (only effects analog outputs))?

Is your receiver set to some alternate mode?

Quote:

Originally Posted by Armored

and the vol in dsp has no effect with the vol at 25

Are you still getting no sound at all with redocneXk.

Quote:

Originally Posted by Armored

it is set to 5.1 - movie mode

what does Scenter2 do? its set to asio7

sCenter2 is Side Right on 7.1 cards (sCenter1 is Side Left). It is not used unless Surrounder is set to 7.1 mode.

Armored · Dec 2, 2007, 11:24 PM

i just have a headphone jack to rca cable connected from the digital out on my soundcard to the coaxial input on my amp.

what do you mean regular speakers? if i disable AC3 passthru let kX do the incoding only left and right play, center and the rears are silent.

Russ · Dec 2, 2007, 11:41 PM

I meant speakers connected to the analog outputs of the sound card. In any case, the rears playing in the front would be a separate issue (I can only guess it is something with the receiver, but... I do not know).

Anyway, the reason I suggested that you upgrade kX, is because the newer versions generally have better ASIO performance than 3537 (plus bug fixes, better compatibility, etc), and I had thought that maybe ASIO problems was causing the gaps in the audio. I did not expect that you would not get any sound at all (it works fine for other people).

Have you tried the GUI version since upgrading kX?

Armored · Dec 3, 2007, 12:08 AM

yes i tried the gui verson of kX, it doesnt do anything, unless i put it on directsound but then it crashes.

ok some more investigation (i saw that it would cut out when the volume went to high [like the chime on msn or loud songs} i turned to 4% that seemed to helped it alittle, it still cuts in and out but not as bad now, i also connected all the outputs of the surrounder to the epliog through volume plugins.

is there a way to make the one into vol thing into more input/outputs so i dont have 8 littles just one big one?

Russ · Dec 3, 2007, 12:23 AM

Quote:

Originally Posted by Armored

is there a way to make the one into vol thing into more input/outputs so i dont have 8 littles just one big one?

Yes, you can create a new plugin.

Code:

; New microcode
    name "VolX8";
    copyright "Copyright (c) 2004.";
    created "12/03/2007";
    engine "kX";
    ; comment "";
    guid "8d89b9db-1c39-40e8-acb5-169b944335a3";
    ; -- generated GUID


; itramsize 0
; xtramsize 0

input in0, in1, in2;
input in3, in4, in5;
input in6, in7;
output out0, out1, out2;
output out3, out4, out5;
output out6, out7;
control volume = 1;
; code     

macs out0, 0, in0, volume;
macs out1, 0, in1, volume;
macs out2, 0, in2, volume;
macs out3, 0, in3, volume;
macs out4, 0, in4, volume;
macs out5, 0, in5, volume;
macs out6, 0, in6, volume;
macs out7, 0, in7, volume;

end

NOTE: There should be 1 blank line after end.

The above assumes that you want 1 slider to set the same volume to all the outputs. You can change the name to what ever you want (as well as input/output names, and default volume level, etc). If you want separate volume controls, then add more control variables:
i.e.
control volume0 = 0.5;
control volume1 = 0.5;
...
macs out0, 0, in0, volume0;
macs out1, 0, in1, volume1;
...

Just paste the above into a text file (or use kX Editor), and save as VolX8.da (or whatever name you give it, etc), and double click on the file to register it.

BTW: You really should only need 6, as AC3 will only do 5.1 anyway, and sCenter1 and sCenter2 are not used in 5.1 mode (no need to connect sCenter1 and sCenter2 to ASIO).

Dec 2, 2007, 01:12 PM	#493
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,828 Rep Power: 41	@Armored It says that you are using 3537, you might consider trying 3538m or 3539 (there have been many updates since 3537). Last edited by Russ; Dec 2, 2007 at 06:11 PM.

Dec 2, 2007, 10:07 PM	#500
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,557 Rep Power: 39 System Specs	If DVD spdif output to output dd digitally works, it should also work with redocneXk. I'll try to think about it some more. Try to add "Vol" plugins in the kX DSP between Surrounder and epilog to reduce the volume entering the ASIO inputs in epilog. It's possible that the volume is too high for the encoder. Last edited by Tril; Dec 3, 2007 at 01:02 AM.

Dec 2, 2007, 10:15 PM	#501
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,828 Rep Power: 41	Ok, if the DVD is working then it seems that AC3 passthru is OK, but here is an small AC3 file you can try (just to be sure): http://www.lynnepublishing.com/surro...round_test.ac3 You should be able to play it in your DVD software (i.e. I can play it in PowerDVD). Make sure that the software is set to output to SPDIF, etc. As far as redocneXk goes: CPU utilization can effect ASIO performance (if ASIO performance is bad, redocneXk will not work well), so make sure you are trying out something simple first (as opposed to some game that may use a lot of CPU power, etc). i.e. Try playing an mp3 (or whatever) and let redocneXk encode that (it doesn't have to be 5.1 audio, as you just want to see if it works without problems, etc). Last edited by Russ; Dec 2, 2007 at 10:20 PM.

Dec 2, 2007, 11:41 PM	#508
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,828 Rep Power: 41	I meant speakers connected to the analog outputs of the sound card. In any case, the rears playing in the front would be a separate issue (I can only guess it is something with the receiver, but... I do not know). Anyway, the reason I suggested that you upgrade kX, is because the newer versions generally have better ASIO performance than 3537 (plus bug fixes, better compatibility, etc), and I had thought that maybe ASIO problems was causing the gaps in the audio. I did not expect that you would not get any sound at all (it works fine for other people). Have you tried the GUI version since upgrading kX? Last edited by Russ; Dec 2, 2007 at 11:52 PM.

Aug 31, 2007, 03:21 PM	#481
JPSelter DriverHeaven Newbie Join Date: Aug 2007 Posts: 2 Rep Power: 0	I have Windows XP, X-Fi with latest X-Fi drivers and redocneXk 1.08: Is there any way to set the ASIO frequency to 48khz? When I start the tool it says: ASIOGetSampleRate: 44100 Hz The Creative drivers though say "48000 Hz", why does the tool detect a different sample rate? The result is a stuttering sound that has a higher key than normal. The GUI version does not work at all. It crashes the most time.

Aug 31, 2007, 03:57 PM	#482
JPSelter DriverHeaven Newbie Join Date: Aug 2007 Posts: 2 Rep Power: 0	I got it to work in 48khz. I had to change from the Gaming to the Audio Creation Console and test it there. After I switched back to Gaming (I need Gaming because I need the base redirection / base enhancer) it was finally set to 48khz. But what happened here? The sound quality is really bad. The base is missing as if I would record the sound with a mikrophone in front of the speakers. Ok, nothing else does "what you hear" inside the recording options? Or what am I doing wrong now?

Sep 3, 2007, 02:35 PM	#483
Nom DriverHeaven Newbie Join Date: Nov 2006 Posts: 17 Rep Power: 0	Anyone having problems with this software encoding, should note that Creative Labs sell a realtime hardware encoder : http://uk.europe.creative.com/shop/p...p?product=1114 Works well with any soundcard !

Oct 30, 2007, 07:18 PM	#484
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,557 Rep Power: 39 System Specs	I released a new version. It's version 1.09. There was a bug in 1.08. The -o switch to choose the output device did not work. This switch especialy useful in Vista because you need to choose the output device called SPDIF if you want to use a Creative card SPDIF output. I may have fixed other bugs and forgotten to note them.

Nov 26, 2007, 11:43 AM	#486
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,557 Rep Power: 39 System Specs	The asio samplerate is showing 44100. It should be 48000, otherwise it won't work. There's a setting somewhere in the X-Fi console where you can set this.

Nov 27, 2007, 06:41 PM	#487
Ghozer DriverHeaven Newbie Join Date: Nov 2007 Location: Sheffield, England, UK Posts: 3 Rep Power: 0	I have 48Khz or 96khz options, its set to 48khz... I have also tried 96khz and its still the same...

Nov 28, 2007, 12:46 AM	#488
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,557 Rep Power: 39 System Specs	Sorry, I don't know what's the problem. I don't have an X-Fi myself so I could never fully test the app with it. It could be an X-Fi specific problem or not.

Nov 28, 2007, 06:55 AM	#489
Ghozer DriverHeaven Newbie Join Date: Nov 2007 Location: Sheffield, England, UK Posts: 3 Rep Power: 0	well im willing to provide any screenshots, logs, and do any tests you want... just let me know..

Dec 1, 2007, 11:10 PM	#490
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	I have a problem where the audio skipps or gives a loud feedback when i run redocneXk 1.09 or the the gui verson my settings are: redocneXk v1.09 The avcodec library is licensed under the LGPL. See the included lgpl.txt file for a copy of the LGPL license. ASIO Interface Technology by Steinberg Media Technologies GmbH redocneXk is in no way affiliated, associated or connected with Creative Technology Inc. * Settings * Driver = 0 (kX ASIO) Mode = kX ASIO (auto-detection) FL = asio 0 FR = asio 1 RL = asio 2 RR = asio 3 C = asio 4 LFE = asio 5 Bitrate = 640000 Renderer = 0 Output Device = -1 - Microsoft Sound Mapper Priority = Realtime priority Latency = 1 hideConsole = CTRL + ALT + key 9 showConsole = CTRL + ALT + key 0 Volume = 100 * Information * asioVersion: 0 driverVersion: 3537 Name: kX ASIO SB0350 10k2 [9c00] ErrorMessage: No ASIO Driver Error ASIOGetChannels (inputs: 16); ASIOGetBufferSize (min: 256, max: 256, preferred: 256, granularity: 0); ASIOGetSampleRate (sampleRate: 48000.000000); ASIOOutputReady(); - Not supported ASIOGetLatencies (input: 256); * Status * ASIO Driver started successfully. Press Q to quit. my specs are: kXproject 5.10.0.3537 drivers Audigy 2 ZS Platinum Windows xp sp2 everythings updated 2.1 sound works fine without it running, could it be something to do with the kX DSP setup, reading your readme file it says Audigy/Audigy2 on Creative drivers mode : FL = asio 4 + asio 12 FR = asio 5 + asio 13 RL = asio 6 + asio 12 + asio 10 RR = asio 7 + asio asio 13 + asio 11 C = asio 8 LFE = asio 9 should the kX dsp reflect that? and put lines from the surrounder to the asioX ones? Thank you for your work

Dec 2, 2007, 01:06 AM	#491
Tril S-3D enthusiast Join Date: Sep 2004 Location: Canada Posts: 1,557 Rep Power: 39 System Specs	Armored, you need to change the DSP when using the kX drivers. There's a picture in the first post showing that you need to connect Surrounder to asio 0, 1, 2, 3, 4, 5. I think you'll get feedback if digital only output is not activated. You are not using "Audigy/Audigy2 on Creative drivers mode". You are using the kX ASIO mode.

Dec 2, 2007, 12:58 PM	#492
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	i do have it set up just like the picture shows in your first post, asio0 to asio 5 is connected to the surrounder. digital output is enabled and i have a cable from my soundcards digital output to my amp. well to discribe the feedback it was more like the sound of snow you get from old tvs when you didnt have the cable plugged into it. but i dont seem to get that anymore, the gui no longer does anything but the 1.09 still makes small caps of science in the sound playing. by this combo of kXdrivers and your redocneXk app i will get 5.1 from games like half life 2 right? Thank you for the fast reply

Dec 2, 2007, 01:17 PM	#494
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	oh i didnt know there were newer ones, his site only had 3537. i will try that out, thank you

Dec 2, 2007, 02:03 PM	#495
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	i installed the 3539 drivers but now theres no gaps of silence it just clicks back and forth between DD and PCM with no sound.

Dec 2, 2007, 06:40 PM	#496
Russ DriverHeaven Extreme Member Join Date: Jan 2005 Posts: 4,828 Rep Power: 41	Have you tried different latency settings in the ASIO Control Panel? Does AC3 Passthru itself work correctly for you (i.e. playing AC3 content without redocneXk)?

Dec 2, 2007, 08:34 PM	#497
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	i have tried all the letency settings. im guessing if AC3 files arent coming up on the amp as DD the passthou isnt working then...

Dec 2, 2007, 09:54 PM	#499
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	ahh ok, well dvd do pass through dts and dd (played o brother where arnt thou) but ac3 files do not, (avi movie with ac3)

Dec 2, 2007, 10:40 PM	#502
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	ummm interesting, the DD lights up on my amp but rear left and right are playing on my front left and right speakers.. i do have spdif set to output on in powerdvd redocneXk will keep the dd on my amp on untill any sound comes on like msns chime or a mp3 my specs are Windows xp sp2 amd x64 x2 6000 asus m2n sli deluxe 3 gbs ram im about to add vol thing to the dsp now

Dec 2, 2007, 10:57 PM	#504
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	and the vol in dsp has no effect with the vol at 25

Dec 2, 2007, 10:59 PM	#505
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	it is set to 5.1 - movie mode what does Scenter2 do? its set to asio7

Dec 2, 2007, 11:24 PM	#507
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	i just have a headphone jack to rca cable connected from the digital out on my soundcard to the coaxial input on my amp. what do you mean regular speakers? if i disable AC3 passthru let kX do the incoding only left and right play, center and the rears are silent.

Dec 3, 2007, 12:08 AM	#509
Armored DriverHeaven Junior Member Join Date: Dec 2007 Posts: 20 Rep Power: 0	yes i tried the gui verson of kX, it doesnt do anything, unless i put it on directsound but then it crashes. ok some more investigation (i saw that it would cut out when the volume went to high [like the chime on msn or loud songs} i turned to 4% that seemed to helped it alittle, it still cuts in and out but not as bad now, i also connected all the outputs of the surrounder to the epliog through volume plugins. is there a way to make the one into vol thing into more input/outputs so i dont have 8 littles just one big one?