|
|||||||
| Notices |
 |
|
|
LinkBack | Thread Tools |
Dec 22, 2002, 04:01 AM
|
#1 |
|
DriverHeaven Newbie
Join Date: Dec 2002
Posts: 8
 |
Mic Boost?
I'm running a SBlive! platinum card and I installed the KXdrivers to get lower latency (70ms is a little too high) and all was fine, I got 19ms latency with them BUT I cannot change the 'mic boost' setting, I can't actually seem to find it. I can't change any of the recording levels at all. The only reason I'm asking about the boost is I want to turn it off for Line level instruments and on for the mic. If I play my guitar or bass (even at a low volume) its really distorted. Do any of you have any ideas?
|
|
|
|
Dec 24, 2002, 08:07 AM
|
#2 |
|
d/h member-shmember
Join Date: Dec 2002
Location: from the edge of the deep green sea
Posts: 2,207
|
Do not plug Guitar or Bass to "Mic" input... Actually this mic-in is for telephony/internet apllications only...
Although you need an preamp to get less or more quality sound with guitars plugged into "line-in'... well.. >I can't change any of the recording levels at all btw. it seems you are using wrong faders to do that. "Never unmute anything on AC97 page!" the only things you need are "source" box on ac97 page and "Ac97 In" faders on "Ins'n'Outs" and "Recording" page... Well, and search in that forum, that "getting line/mic to work" theme were already played several times... (and read the help please ;) |
|
|
|
|
Dec 24, 2002, 06:15 PM
|
#3 |
|
DriverHeaven Newbie
Join Date: Dec 2002
Posts: 7
|
... Actually this mic-in is for telephony/internet apllications only...
So do you need to use mic2/line2 for mic recording in cakewalk? randy |
|
|
|
|
Dec 25, 2002, 11:37 AM
|
#4 |
|
d/h member-shmember
Join Date: Dec 2002
Location: from the edge of the deep green sea
Posts: 2,207
|
if you have LiveDrive then yes. If not - use any preamp
|
|
|
|
|
Dec 26, 2002, 02:46 AM
|
#5 |
|
DriverHeaven Newbie
Join Date: Dec 2002
Posts: 8
|
Sorry, what I meant was, the mic-in on the Live! drive. I've set it over to Line-In.
|
|
|
|
