(giga + FL) audio out of sync

Nayi

Hi guys

Here's my situation, I'm using gigastudio 160 2.5 on a P4 2.4 ghz with 512 ram and a sound blaster live! 5.1. and I use fruity loops as my sequencer.

What I do is, I add some midi out channels on Fruity loops, piano roll some melodies with my midi controller and everything is smooth. The problem is that when I playback the track the audio is out of tempo, it starts getting latency and you can even see the playback indicator trembling...

I have tried everything: from changing the buffer in the gigastudio, to changing the buffer on FL and even changing the driver to ASIO driver on FL.

Nothing worked

So, what's causing this problem?



Thank You in advance

dj_stick

i think possbily running both programs is causing you issues

Nayi

Well in other to work I have to run them together. The virtual sampler (gigastudio) and a sequencer (fruity loops).

I'm thinking that may this has got to do with the configuration on both programs.
So since i'm no expert I will lay down them to you...

Gigastudio:

Hardware - kx GSIF - SB0220 10k1 (ff80)
sample rate 48 16bit

outputs enabled 1,2 to 15,16

midi in to midi out mapping

kX control SB02220 10k1 (ff80) on all 4 ports

midi out ports: nemesys out: port1, port2, port3, port4

Fruity Loops:

Midi settings

output port mapping

kX control SB0220 10k1 set to port 0

nemesys midi out: port 1 set to port 1
nemesys midi out: port 2 set to port 2
nemesys midi out: port 3 set to port 3
nemesys midi out: port 4 set to port 4

master sync output
kX synth SB0220 10k1 (ff80)

Remote control input
kX control SB02220 10k1 (ff80)

Audio Settings

output
kX Wave SB0220 10k1 (ff80) 0/1



and that's it, hope someone can help me with this...

dj_stick

kX control is normally used to control plugins in the DSP, not neccesarily a midi port… having all four ports mapped ot that may cause you issues… gigastudio should work w/o FL, use the UART as your midi input port

Nayi

Ok thank you very much, I will try that.