No signal from aux2 at the audigy drive

uml

Hi...

I'm using the audigy platinum with kx-drivers 3535 under win xp.

So far I used a complete software based setup, that's why I needed only the spdif out connected to a digital receiver, the headphones out and midi in from masterkeyboard. Even with complex dsp-routings it runs very fine at 10ms latency.

Now I've connected an analog device to the aux2 in at the audigy drive, but I don't get anything through this port. At the line in2/mic2 port it's the same. Although I've tried several routings, directly from prolog to analog out/spdif out/rec/asio, there's no signal.

What can be the matter??


I don't want to use an input from the AC97 because of the bad ADs.

Thanks for your answers!


uml


By the way: When I've once installed the creative driver, I was shocked... It protects the most useful features of the hardware from the user, a very strange concept. Before I've found the kx-driver, I wanted to buy another system! but then kx (3515 or so) solved all of my problems so far, not thinkable how I should work without it - so many many thanks to the kx team!

TravelRec.

Hi!

Have you tried to unmute and set the faders for your inputs correctly in the kxmixers ins/outs page???

Greetings!

TravelRec.

uml

Yes, of course that was the first thing I've done after connecting the device...

To be sure it's not simply a wrong label, I've also tried all input faders and mute buttons.

no signal

NodensTheOldOne

i have the same problem with a live platinum 5.1 (SB0060 5.1 [b400]) no sound from aux in 2 mic in 2 , line in 2, etc, in the live drive only works the ir and the headfones features, how can ai fix this? all the input in ac97 and record panels are enable (unsilenced)

NodensTheOldOne

i don't konw what i do, but finally get sound from line 2 /mic2, buuuut, buutt... very low, ai raise the volumen in record panel and ac97, but don't work, the same very very low volume .mmm in the windows mixers i cant find these controls,

jfranciskay

I had the same problem. What worked for me was the "Aux 2" was muted in the "ins and outs" in the kx mixer. The color grey means "mute" , blue "unmute". Hope it helps...