Temragon

Ram issues only seem to be on 7.

Check the thread in this forum, we should probably verify that with a few more reports.

hoanjun

Hi Temragon!

Tks for your advice. I've done with running kxmixer in compatibility mode, and could run the km mixer already. And as read threads above, i set Master Mixer as default device, but totally no sound. Then i switch Wave output 4/5 as default device, and Master mixer as default communication device, but there happen such an continous sound popping. Could you guide me on how to set up on this to get sound , and also setting up in kx mixer.

Tks so much
Hoanjun

Temragon

My only advice is to read the rest of this thread, or try larger buffer settings (Right click the mixer tray icon and dig through there). If you have more than 2gb of ram, it MIGHT be the problem.

Ino

Hello I habe a problem:

audigy 2zs
this kx driver

i have no sound in youtube an other flashsites
with winamp, vlc ... i don't have any problems the sound ist very nice
i read in the internet i have to change to 48Khz in the windows sound propeties but i can't do this.

can somebody help me ?

hoanjun

Dear Temragon!

Tks for your input. I had tried it already but it doesn't work. I have 4G Ram. Anyway, i have to buy another new sound card if my SB0220 doesn't, hichic. Thank you very much

Hoanjun

lord_velocraptor

Drivers not work for me. Everything is going fine but after few minutes (watching film, or listen music) sound is very distorted. Im back to creative drivers again and i'm not happy with that. Any ideas whats wrong? my pc: Vista x64 SP2, Audigy 2 (SB0240), 8Mb RAM (with 4MB same effect), GFX: radeon4870, Motherboard: Gigabyte GA-MA790X-DS4

BountyHunter

I've waited forever for this.

horrok

hello there,

i'm using the driver with sb0400 (audigy 2 value) under windows 7 x64.

everything works fine (except some clickings in sound just after the installation, but i've solved it changing from Wave Out 6/7 to 0/1)

the only issue is ASIO - it doesn't work even with the software said to be supporting x64. i've tried to use it with GuitarRig 3.2, but it says the ASIO is "Stopped". asio4all driver works fine in the same time, but with noticable delay

is there any workaround? maybe any settings?

Max M.

>i've tried to use it with GuitarRig 3.2, but it says the ASIO is "Stopped".

make sure you set the right sample rate for the GR (kX ASIO support only 48000Hz for ASIO inputs).

__________________

horrok

it doesn't allow me to select any sample rate (the only choice is "0" and is not selectable). also there is an "ASIO Config" button in GuitarRig; nothing happens when i click it (in 32-bit Vista this button opened the kX asio settings window)

Max M.

Is this a 64-bit version of GuitarRig? Note that the 64-bit version kX supports only 64-bit ASIO hence requiring the ASIO client to use 64-bit ASIO interface.

p.s. mm, according to NI site, it looks like there's no 64bit version of the GR.
i.e. you won't be able to use GR with the kX ASIO in 64-bit OS. - i.e. use asio4all.

__________________

kuh

NI GR ver. 3.2.0 -3.2 1 - x64 standalone and x64 VST plug.

regedit

HKEY_CURRENT_USER\Software\Native Instruments\Guitar Rig 3
\AB2 SampleRate=48000 ?

horrok

thanks. i've tried to, but GR simply sets this value to zero at startup if the kx asio is selected (and sets it to 44100 for asio4all)

don't think sample rate is the main problem. "asio config" button is not clickable, and also there are no inputs\outputs avaliable to choose from in GR settings.

i guess the kxasio implementation is a bit outdated or incomplete for x64 systems. so will be waiting for the newer version )

A2597

using windows 7 RC with 8GB ram an no sound here.

Figured drivers just didn't work, but now that I'm seeing others with the same issue I'm thinking it might be related. This evening I'll take out some stick of Ram and see if that fixes the issue.

LyyNx

just thought i'd report that using winxp x64 i have absolutely no problems. no noticable that is.. although ADC of profx seems to be having problems with gui but this might be a problem with my winxp since i nlite'd it.. maybe i removed some runtimes required for it. but using SRC from profx solves the problem for me

using audigy2 plat ( sb0240 )

mushroomboy

I'm running Win7 7264 with SBLive! (SB0102 10k1 ac00). I have kmixer running in compat and the Wave Out 4/5 selected, I haven't tried DSP (for now I have no need) but overall the sound works perfect. I'm VERY VERY glad you guys got these drivers running, it was the only thing I didn't like about a Windows 64bit OS (I normally run linux anyways) but since this works I'm extremly happy. Now I don't cringe as much when I'm booted into windows, thanks guys you did an AMAZING job. Peace!

search4bp

hi guys,

before I try to install a Win 2008 Server x64 OS with a KX x64 driver, I thought to better ask if that might work - as most Vista x64 drivers work on Server 2008 x64

can someone of you answer this question please!?

thanks