SPDIF freq selection

eyagos · Apr 25, 2003, 08:11 AM

Hi there.

The SPDIF I/O does not work in my Audigy2: I use two cards (an Audigy and an Audigy2) and I can´t interconect them with the SPDIF connectors. The conection is right but there is no sound.

Also, when trying to change the SPDIF freq on the Audigy2, the sound goes out, and I need to restart windows to restore it.

Here are some results form kxctrl (for the Audigy2):

Quote:

\kxctrl $1 -istat

spdif A: FFFFFFFF 0
spdif B: FFFFFFFF 0
spdif C: FFFFFFFF 0
i2s 0: 1080000
i2s 1: 1080000
i2s 2: 1080000
spdif 0: 2108504
spdif 1: 0
spdif 2: 0
spdif freq: 44100, 48000, 96000 (depending on the selected freq in kxmixer. The other parameters never changes)

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Apr 24 2003 02:46:30
Driver Version: 5.10.00.3532 - debug
DB Name:none
SB0240 10k2 [c800]
PCI Information:
Device: 41102 Subsys: 10021102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card HAS AC97 codec
Codec name: SigmaTel STAC9721/23
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6940] :
DAC resolutions : -16-bit- -18-bit-
ADC resolutions : -16-bit- -18-bit-
Ext Capabilities [200]: -slot/DAC mappings-
Port: c800 Irq: 14
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
OS version: [2 5 1 Service Pack 1; 2 5 1 Service Pack 1; 156 148]
----------------------------------------------------
PIII 1000 MHZ
Chipset VIA

**Eugene Gavrilov** · Apr 25, 2003, 10:34 PM

>> when trying to change the SPDIF freq on the Audigy2, the sound goes out, and I need to restart windows to restore it

confirmed. will be fixed in 3532 rc2

however, when 48000 frequency is selected, spdif i/o should be fully functional

/Eugene

eyagos · Apr 26, 2003, 04:50 AM

Well, you are true, but if we change the freq selection list, the sound is lost.

Sometimes I can change the frecuency (and then the sound goes off) and sometimes I can't do that (an error message appears and the frecuency doesn't change). And 'seems' to be any kind of "inicialitation" or "incomaptibilty" between the the four controls of the SPDIF feature in the principal mixer window, bucause yesterday I was able to chage the frecuencies, but not now. Or maybe simply the error you has just detected...

**Eugene Gavrilov** · Apr 26, 2003, 06:34 PM

pls download and install the 3532 rc2 (see the 3532 rc1 thread 3532 release candidate 1 :))

it should fix 'spdif freq selection' problem

note that the spdif inputs/outputs can be out of sync after you change the frequency (48000<->96000)
in this case I recommend you unplug and re-plug the spdif connector
the hardware may sync automatically within 1-2 seconds

/Eugene

eyagos · Apr 27, 2003, 06:40 AM

All problems solved. You have done it again.

Apr 25, 2003, 10:34 PM	#2
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,037 Rep Power: 56	>> when trying to change the SPDIF freq on the Audigy2, the sound goes out, and I need to restart windows to restore it confirmed. will be fixed in 3532 rc2 however, when 48000 frequency is selected, spdif i/o should be fully functional /Eugene

Apr 26, 2003, 04:50 AM	#3
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	Well, you are true, but if we change the freq selection list, the sound is lost. Sometimes I can change the frecuency (and then the sound goes off) and sometimes I can't do that (an error message appears and the frecuency doesn't change). And 'seems' to be any kind of "inicialitation" or "incomaptibilty" between the the four controls of the SPDIF feature in the principal mixer window, bucause yesterday I was able to chage the frecuencies, but not now. Or maybe simply the error you has just detected...

Apr 26, 2003, 06:34 PM	#4
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,037 Rep Power: 56	pls download and install the 3532 rc2 (see the 3532 rc1 thread 3532 release candidate 1 :)) it should fix 'spdif freq selection' problem note that the spdif inputs/outputs can be out of sync after you change the frequency (48000<->96000) in this case I recommend you unplug and re-plug the spdif connector the hardware may sync automatically within 1-2 seconds /Eugene

Apr 27, 2003, 06:40 AM	#5
eyagos DriverHeaven Addict Join Date: Dec 2002 Posts: 259 Rep Power: 0	All problems solved. You have done it again.