F_ame

My microphone did'n worked witn kx driver! What i must do?

soudlous

I am also wondering why my mic is not working

I am running SB0350, AUDIGY 2 ZS,
under win xp pro sp2
p4 3.0ghz

sound to speakers works fine though.

Max M.

use search please

F_ame

Search didnt had a result! Please help!

Russ

kX Getting Started Guide
How to setup the microphone

Aside from the above, there are many posts in the forum on using the MIC with kX.

F_ame

it dosn't help. Microphone didnt worked!

Russ

Ok, give us some more info to work with, and we will see if we can help you track down the problem.

What version of kX are you using?

What model sound card do you have?

How is your MIC connected to the system?

i.e.
Is it connected to the MIC input on the rear of the card, or is it connected to a Drive Bay input, etc?

Double check the connection to verify that it is in the correct jack, and is fully inserted, etc.

In what way does it not work?

i.e.
Cannot record, cannot hear MIC input, or both, etc.

F_ame

kxdrv3538l-full

Crative Audigy 4

With Creative drivers microphone was worked
Mic connected to the mic output in soundcard.

Russ

Start with the following:

In the DSP window:

Right click and choose 'Reinitialize DSP' from the menu.

In kX Mixer, AC97 page:

Click on the 'Reset AC97' Button.

Unmute the 'MIC In' slider (click on the little circle under the slider so that the level reads '0' instead of 'inF').

Try speaking into the MIC. You should be able to hear it in the front speakers. You can also boost the MIC signal by enabling the +20 dB MIC Boost option (on the same page).

Let us know if that works for you.

MPreston

Russ your above worked and I could hear my own voice over the speakers, however when i try and use my microphone to speak to someone over such things as skype/msn it does not pick up any sound, even thuogh I can hear my voice.

Russ

The above instructions were just a starting point, to see if F-ame could get his MIC working at all. For VOIP applications, you need to setup your MIC for recording.

Unmute the 'AC97 Rec Level' slider on the Recording page of kxmixer.
Select MIC as the AC97 source in the dropdown box on the AC97 page of kxmixer.
Adjust the Recording Gain slider as necessary.

That is basic instructions to get it working (sorry, I gotta go eat dinner). For more detailed instructions, refer to the links I posted previously, or search the forum.

Exodus737

I also had the same problem but i got my micrphone to work and everything but i still hear my voice through my speakers and i wont i dont know how to turn it off and its getting annoying.

Russ

Mute the 'AC97 In' slider on the 'Ins and Outs' page of kxmixer, and mute the 'MIC In' slider on the 'AC97' page of kxmixer.

F_ame

Microphine dosn't work with kxdriver! This is a crazy system with setup microphone!
Maybe i shall install creative drivers....

P.S. Maybe import setup with already worked microphone?