DriverHeaven.net - DriverHeaven Tools Discussion

Help please with ATI Mobility Modder

Saile — Fri, 20 Nov 2009 21:50:23 GMT

Reading your instructions,

Quote:

6: In Vista, go to C:\ATI\SUPPORT\7-4_vista32_dd_ccc_enu_44985 (Or whatever the driver installation folder was called), and run the SETUP.EXE. Please note you might see a "Driver is not WHQL certified", ignore this, as it is a side effect of the modification.

I don't understand that because i don't have that file in such a folder. If i search in Program File, i find the folder ATI, but not Support, and i go through every folder in their and not find that "7-4_vista32_dd_ccc_enu_44985".

After managing to install it, i also wanted more ram for the graphics, when i clicked search it wanted a inf file, which wasn't to be found anywhere in any of my ATI folders.

NOTE:
I have Windows 7 32bit Pro
ATI Mobility 3470
4GB RAM
Core 2 Duo 2.26ghz

ATI 4100 Support

ivanmmj — Fri, 20 Nov 2009 16:18:12 GMT

Hey guys! The new ATI 4100 are being used by Toshiba. (I'm not 100% sure what's different between them and the ATI HD 4200...)
I was hoping you guys can add support to it.

---------------
Display Devices
---------------
Card name: AMD M860G with ATI Mobility Radeon 4100
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x9713)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9713&SUBSYS_FF1F1179&REV_00

Let me know what else you need.

Acer laptop + ATI Mobility card + Catalyst 9.11 = No go

ToJa92 — Thu, 19 Nov 2009 16:34:14 GMT

Hello! It's my first post:D

Anyway, I have a Acer Extensa 5620G laptop with a ATI Mobility Radeon 2400 XT graphics card(running Windows XP SP3). Older 8.xx versions worked great with it(modded drivers of course).

However, when I tried to install 9.11(with this new installation manager), everything looked almost great with one exception - drivers could not be installed because they were unsigned(this was said at the end of the installation). I tried turning off the check for signed drivers in Windows XP but that did not have any effect. Do you guys have some advice?

EDIT: I managed to install Catalyst 9.1 with drivers, but it's using the old setup(not the new install manager).

Problem with Catalyst 9.11 (INF File not Found)

hcasquet — Wed, 18 Nov 2009 10:58:04 GMT

I'm trying to install Catalyst 9.11 on Windows 7 32bits.
I have a HP Pavilion dv6 with an ATI Mobility Radeon HD4530.
I've modded them with the mobility modder just like always,
but when it tries to install, it only says: INF File not Found. :(
I've had no problem so far with any other version before.
So this may be a problem within this new drivers set.
Have someone get this error too? Is there any solution? :confused:

Thanks in advance.

UPDATE: I have successfully installed the latest drivers from HP.
They are rather old and for vista only. But they work!
I have tried several times to install new ones just as i have wrote above,
but no one have been installed ok. I had installed before other modified drivers,
since 9.6 on Windows 7, but since i have tried to install those modified 9.11, i can't
install other modified drivers, than the official HP ones. Dunno why.

msxml6 q for Win 7 Pro 64 bit ?

J23 — Wed, 18 Nov 2009 06:34:31 GMT

Hi all. Great site. I will do the official "Hello" thing in a bit but as I have been going thru hell the past 3 weeks trying to get my HD Radeon 3670 to install with ccc (ver9.9 0r 9.10) on my Dell xps studio 1640 laptop I really need this fixed before I lose more time.
I currently have the Windows 7 Pro 64bit(via clean install) driver installed. It works about 40% of the time. Then it cacks out and I am unable to even run a screensaver or have my Zune 4.2 SW working above basic.
I've never used the modder tool so I want to make sure I get this right. Hence my header. Do I need to install the msxml for 7? If so which one? After this is done or not I would then dl'd the desktop 9.10 ,extract but stop @ install then run the mod tool. Is this correct? Any & all feedback is greatly appreciated.
Regards,
J23

My screen is black

Olle24 — Sun, 15 Nov 2009 12:31:07 GMT

I think I did something wrong because everytime I startup my computer and get past the Windows XP loading screen my laptop screen goes black.

First I extracted the files and used the moddtooland reeboted my computer, nothing happend. I installed once again and did not stop the install after I had extracted those files. After I installed the drivers I used the moddtool and reeboted my laptop, and now this problem shows up.

How can I fix this?

Using Radeon Mobility HD 3650 graphic card(PCi-E) and Asus x56ta computer.

CCC is not turning on.

Tomashek — Fri, 13 Nov 2009 14:53:53 GMT

Hi, I've tried to install newest drivers (CCC 9.10) for my mobility Radeon HD 3650. But I've got a problem, after the installation, Catalyst Control Center is not turning on, i tried to turn it in through right mouse button menu and start menu but it's not working. Whta to do?

ati modder error help plis

pindle — Thu, 12 Nov 2009 23:54:51 GMT

first installation of ati modder tool ended in a systemrevovery. i tried a 2.nd installation and it worked on the first view. but when i go to hardware/videocardsettings/driver there i can see a error ( 43 ) where is written to: videocard has stopped working because of this error.

when i start the comp there appear " no MOM.application found " aswell.
has someone an idea how to fix that???

amilo xi 1554
ati mobility radeon x1900 256 GDDR 3
intel core duo 1,6gh+1,6gh
2gb ram

Read more: [COLOR=#93a5d8]ATI Mobility Modder Version 1.2.1.0 Released - Page 2[/COLOR] [COLOR=#93a5d8]http://www.driverheaven.net/driverheaven-tools-discussion/187859-ati-mobility-modder-version-1-2-1-0-released-2.html#ixzz0WgzdbRPL[/COLOR]

�The system has not been modified� message after installing driver

Natnat — Thu, 12 Nov 2009 22:45:54 GMT

Hello

I am new here .... and this is all very new for me, here it goes

I installed windows 7 64 bit on my Sony vaio SZ-79GN when I tried to run the drivers for the Nvidia 8400M GS I realized that Sony does not supply driver, nor do the Nvidia drivers can be installed on the vaio. Eventually I found this site. I have followed the instruction for the nVidia Mobility Modder Tool, downloaded the correct driver (186.81) so far so good. Then I run the setup for the driver and ALAS! At the end of the installation I get the following message �the system has not been modified� I don�t know what else to do�.

installing Catalyst after using Mobility Modder on downgrade Vista to XP

jokjok — Thu, 12 Nov 2009 02:28:35 GMT

Hello,

So after a long & hard way I managed to downgrade from Vista to XP on my toshiba satellite A 350. I got the xp driver for Ati HD 3650 working, thanx to the Mobility Modder. (I got the driver from LG website)

Now, how can I install the catalyst control center? This is what I get when I try to install Catalyst:

< setup could not find a driver compatible with your current hardware or operating system. Setup will now exit >

Any ideas would be very welcome.

Thanx

ATI Mobility Radeon HD 2400 and AVIVO under Windows 7 (x64)

jkunze — Fri, 06 Nov 2009 01:03:22 GMT

Hi,

maybe somebody can help me. Last week I installed Windows 7 Professional. I modified the 64bit version of the latest Catyst Driver (9.10) with all components (Driver, CCC, Hydravision and Avivo) included in the subdirectory "packages".

But when I run setup in custom mode I only see entries for Driver, CCC and Hydravision.

Before the upgrade (under vista) I saw all components in custom setup.

Why can't I install Avivo? Have somebody the same problem? Or maybe a solution? I have a Mobility Radeon HD 2400 installed in my system.

I hope somebody can help me.

Thanks

Jens

Have to have or not with ATI Catalyst??

jpmackay — Wed, 04 Nov 2009 15:52:51 GMT

This morning I installed the program of ATI Mobility Modder but don't have the program of ATI Catalyst on my laptop, Compaq Presario M2105CA with XPRESS 200M graphic. So my question is that am I suppose to have the program of ATI Catalyst to work with ATI Mobility Modder or not necessary. Your help would be appreciated.

Thank you,

John

9.11 beta4 & 3470

joosimol — Tue, 03 Nov 2009 21:27:00 GMT

Hi there.

I have Ati mobility radeon hd 3470 and 9.10 (8.661.x) driver installed but trying to install the newest beta (ati-opencl-beta-driver-v2.0-beta4-vista-win7.zip) (8.670.x).

I'm also using Windows 7 64bit.

Modded with the newest mobilitymodder, changed all .inf files and still no luck. Everything else install nicely except the actual driver! What to do, what to do?

The error I'm getting is: "Driver Install: the driver package does not specify a hardware identifier".

Getting tired of Borderlands freezing again and again. I think it's Ati to blame here...so perhaps the beta could fix this :P

Will the Photoshop Benchmark work with Photoshop Elements?

shaman9876 — Sun, 01 Nov 2009 19:34:15 GMT

As the title say's will the Benchmark script work with Photoshop Elements 7?

Thanks.

setup.exe?

rockpk — Sun, 01 Nov 2009 11:00:30 GMT

Hi. i came to the mod tool for help because when i play assassin's creed for pc, i get up to the second memory block and there are sort of like scratches in the screen and i believe it is because of my old driver for my laptop. I just got this game today too so i know it can't be scratched. but anyway I came to your site and because i have a x1400 series ati modem, i did some research and apparantely downloading the 8.3 version is the best way to go for me. SO i did and got up to the part where it said run setup.exe.
Two things. 1. there is a setup application and a setup.exe.manifest (which one should i choose because the second one i can't open without some extractor i think
2. when i choose the first one, the same things downloaded when i originally installed the version 8.3

what do i do?