DriverHeaven.net - ATI Graphic Cards

Eyefinity - 5XXX Cards - Resolutions.

SeraphicSorcerer — Fri, 20 Nov 2009 13:02:05 GMT

Just thought I'd post this, (and I think AMD should pay this guy for HIS hard work, and/or hire him)

Widescreen Fixer - imk.cx

But this will Help you fix that sick feeling you would get otherwise from not fixing the aspect ratio across multiple monitors.

I plan on using it when I get this Saphhire 5970, I am waiting for, Might have to wait til my Bday though (Jan 24th) :P

Anyhow thought I'd post it for you peeps.

radeon mobility x1300 help

migar200 — Fri, 20 Nov 2009 02:54:08 GMT

i need some help, i have a inspiron 6400 notebook with a centrino duo T2400 1.83 ghz and 2 gb in ram, i have a graphic card ati radeon mobility x1300 but i have a opengl1.1 and the technics specifications say the graphic card support opengl 2.0, so i have a new program for animation thats required opengl 1.3 at least, i go to ati page for download the lastest drivers, and doesnt work, i still have the opengl1.1, what can i do help me please. thanks

Upgrading questions

OldBuzzard — Thu, 19 Nov 2009 20:52:42 GMT

OK folks, I'm looking at a pair of 4870s that I just bought, which are going to be replacing my trusty old 3870 X2.

One is an ATI branded one with the 'dust buster' HSF which exhausts to the outside of the case, and the other is a Sapphire with the 'open' HSF that will be exhausting some hot air into the case.

I'm thinking that for better 'heat management', that I would want to put the Sapphire in the top slot and the ATI in the bottom so that the ATI won't be drawing hot air coming from the Sapphire. Your thoughts on this would be appreciated.

Now another question arises as well. I'm going to be crossfiring them, and would like to do it with the least amount of hassle. However, I have 9 OSs to consider.

Would it be best to:

1. Install ONE, and then update the drivers in each OS, then shutdown and install the 2nd in crossfire?

2. Install both in NON Crossfire mode, install drivers, and then put on the ribbon and enable crossfire?

3. Install both in Crossfire. I think that I've read that trying to do directly to Crossfire can cause issues, so I'm looking for answers.

Finally, I'm also running two monitors. Once in Crossfire, do I run both monitors from the first card, or one monitor from each?

Any help would be greatly appreciated.

Finally buying a new card... EAH5750

MitchRapp — Thu, 19 Nov 2009 20:12:34 GMT

NCIX.com - Buy ASUS Radeon HD 5750 700MHZ 1GB 4.6GHZ GDDR5 2XDVI HDMI Display Port DIRECTX11 PCI-E Video Card - EAH5750/2DIS/1GD5/A In Canada.

What do u guys think
will my PSU be ok with this puppy? (check specs <---)

Diamond ati 2600XT 256mb PCI- CS:S loses monitor signal, sounds echo

casem0ds — Thu, 19 Nov 2009 03:30:49 GMT

Ok so not sure what drivers I'm on, but when I play CS:S, the monitor signal will go out and at the same time, the sound will stutter or echo, but the rest of the machine is working fine.

Does anybody know what causes this problem?

I have ran ubuntu memtest and it's not the RAM as other people suggested.

xp pro legit
athlon le-1640
2 gigs ram

ATi HD 5970 Released

BigBodZod — Thu, 19 Nov 2009 02:12:16 GMT

Just an FYI ;)

Clicky!!!

Hmm, since I have an Cooler Master CMStacker 830 Chassis I should have no issues with the length of this card :D

Should I Upgrade?

drwho — Tue, 17 Nov 2009 19:03:18 GMT

Well, its getting close to Xmas again and as such I always upgrade something on my computer. I'm currently running a HIS HD-4870 X2 video card and have been looking at the 5870 which recently has made an appearance. So, is it worth the money to go from a 4870 X2 to the 5870 right now at this point and time?

HIS X1650 pro agp crushing problem!

cihatb — Mon, 16 Nov 2009 13:51:15 GMT

I searched nearly 100 forums but i didnt solve my problem, my friend told this forum hope u help me :(

my problem is my graphic cards crushes

i connected the card connected power cabble i installed lastest driver @ ati's offical site(Catalyst 9.8 btw i tried many drivers; original given driver with card,7.8,8.1,8.2,9.2)i restarted.Everythng goes well but when i start a game or execute too much programmes, the screen bounces up-down and says Going for power save. :(:confused::x:mad::eek::uhoh:

My PSU is Everest 440W

Microsoft Windows XP
Version 2002
Service Pack 3

AMD SEMPRON PROCESSOR 2800+
1.60Ghz 1,43 GB RAM
VIA CHIPSET
Sony SDM-HX75 LCD Monitor

Hope u help me

thx for comments...

radeon 9100 - 2. monitors

zen04 — Mon, 16 Nov 2009 01:13:48 GMT

Hi

I have Radeon (Manli) 9100 and here is the problem:

I cant set that 2nd monitor to work (dual monitor)

I have 2 CRT monitors ( MAG and LG)

when i connect one of them into LCD port ( with AGP adapter) i can see monitor and when i Enable it (clone with main) nothing happens monitor stays in stand-by mode.

I have tried with LG and MAG monitor it is same.

TV-out works fine it is OK.

Can someone help me ? i dont know what to do any more...

this drivers im using:
http://support.amd.com/us/gpudownloa...rer300-xp.aspx

T60p Graphics Card Problems

kastuart2 — Wed, 11 Nov 2009 19:10:12 GMT

I just recently installed windows 7 pro on my laptop and am experiencing a video playback issue. When I play movies from sites such as hulu and put it in fullscreen, the video framerate is slow. The driver for my graphics card has not been updated for windows 7, so I tried the mobility modder with the latest vista catalyst drivers and no effect. Anything else I can try? My video's came in clear when windows xp pro was installed before. My computer specs are below.

Lenovo Thinkpad T60p
Intel Centrino Duo Processor 2.16ghz
3gb Ram
ATI FireGL V5200 256mb graphics card
100gb hard drive

ATI still unable to get 1080p HDMI/VGA right...

Judas — Mon, 09 Nov 2009 18:54:51 GMT

So i've been once again ripping my hair out over the distruction of a relatively "working" CCC that has removed so many bloody options and left us with a terrible UI..

While yes that's driver related..

I think the biggest problem is the issues still plagued by the HDMI connections and even starting to affect their VGA abilities unfortunately.

I setup a HD4870 on a 1080p Samsung LN40B650 (newest revision) and i've never had so many issues before with VGA connections. I did get 1080p working @ 60hz via VGA, but HDMI still a horrible mess.

In the hopes of resolving all the issues, i got a HD 5770, and things have not only gotten worse, but it's basically unuseable on hdmi/vga fronts completely.

I cannot select anything above 1360x768 without distortion or problems. The HDMI output gives me a 1920x1080 desktop, but is interlaced and stuck at 30hz, it also gives me lines and an occasional shot of green instead of white.. which initially i cropped up to being hdmi cable issue, but alas, not only several cables including a 3ft Monster overpriced cable, but a different video card. Why can't ATI get hdmi right?

Why can't i get VGA working at all to? Suddenly it's stuck at 30hz or below as well, AND i can't get a picture at all at anything above 1360x768.

the newer CCC's FORCE options don't list anything beyond the typical "unrecognized monitor" options not does it allow me to force anything at all, select a resolution in the force list, and the apply or ok buttons do nothing.

Unfortuneately, unless i can get this resolved for the customer i've got within the next 30 minutes, the 5770's are going back.

In a crazy attempt to get something at least to work and confirm, a 5870 also produces the same exact results.

Now figureing this is perhaps, well as claimed to be samsung specific, i cannot get a panasonic plasma OR Toshiba LCD to work at all either, the Video card JUST won't work...

Any solutions obviously welcomed..

Latest updates installed, latest drivers, windows vista or win7 x64...

ATI Eyefinity HD 5870 2GB Eyefinity in the wild

Zardon — Fri, 06 Nov 2009 19:20:16 GMT

The Radeon HD 5870 "six" or Eyefinity edition has been spotted over at pcpop.com. The card has TWICE the amount of memory (2gb) when compared with the standard model and has not five but SIX Mini-DisplayPort outputs.

The card abandons DVI and HDMI outputs for the plethora of Displayport outputs and the upper section of the backplate has been kept free for a heat exhaust system. As well as the mega memory count AMD have included both 8 pin and 6 pin PCI express power connectors and the standard 1GB version ships with two 6 pin connectors.

This will more than likely be a limited run edition as there will be a very small audience demanding six screen capabilities. Looks mega though doesn't it?

Allan Campbell: Heaven Media

Attached Thumbnails

ati_omega_xp2k_48442-install problems

c0796 — Sun, 01 Nov 2009 23:49:44 GMT

I may have been given incorrect info about installing these drivers. I mentiond that I uninstalled everything ATI and asked if I install the Omega drivers will I need to install anything ATI? I was advised Omega will incluse everything. I am guessing that is incorrect as I am having issues. Even though I select the ATI tray tools to be installed they are not installing therefore I cannot adjust anything as suggested with install isues. Checked my mobo for anything out of date, updated an audio driver but all else seems to be up to date. I am obviously no software/hardware expert but something is amiss. I have attached a dxdiag report.

If anyone has the patience, would you be so kind to mention what I need to do to correctly install these drivers to work? Do I need to uninstall anything and start over? What else needs to be installed, i.e. VGA driver of some sort?

Thanks for any help.

Attached Files

DxDiag.txt (45.2 KB)

The official "I got an HD5000 series card" thread

kris23 — Fri, 30 Oct 2009 22:25:07 GMT

ATi's benchmark dominating GPUs have been on the market for a while now. The first cards on the market to support DirectX 11 and have a slew of impressive numbers while doing it.

So, who has one of these next gen cards in their system and how do you like it so far? Happy? Disappointed? Or simply unimpressed?

Discuss!

sapphire radeon hd3650 agp no signal

madimp76 — Thu, 29 Oct 2009 19:42:21 GMT

Hi, this is my first post so bare with me,

So my problem,i have a new hd 3650 agp card as my x1650 card crapped out. i fit the card and turn on the p.c.This appears to boot up but there is no signal to the monitor.The fan on the card is spinning and i believe i have connected it right. i've tried updating the bios agp driver,unstalling old ati driver i'm at a total loss.
My specs;
mobo, asus p4s800d-x
cpu, int p43.0gz HT
ram, 3GB
PSU, 500W COOLMASTER EXTREME POWER PLUS
OS, Winxp 32bit

Would really like some help with this.
Thanks.