Lex Nahumury

Well, ProFx ADC plugin has little to nothing to do with 24/96 stuff,
so you should be able to get native 16/48 signal from those 2 extra UDA outputs
with ~10dB SNR improvement (unless there are some sb0240 quirks)

As for 24/96 stuff on CL cards+kX; I never even bothered to figure that mode out simply because ASIO 24/96 is not supported by kX. In other words; useless(to me)!

Anyway, at least that ProFx version works with all driver releases from 34 to 37 .

Lex Nahumury

I noticed some users don't know this but;

There are two ProFx v3.08 versions available for download;

One is compatible with all 3534 to 3537 driver releases,
the other is compatible with all 3538 driver releases.

http://members.home.nl/nahutec/ProFx/profx3x.htm

In other words; ProFx v3.x works with ALL kX driver releases!
[COLOR="Silver"](well, ...should work )[/COLOR]

Will SHeppard

Just to say - the ProFX plugs are great!

didymus

any preset .kx that supports the latest profx i can download???

__________________
[Intel Core2Duo E7650 @ 3.2Ghz] [GigaByte GA-P35C-DS3R vF4] [ASUS EN8800GTS 320MB @ 650Mhz/1000Mhz] [Corsair Twin2X2048-6400 2x1GB DDR2 800MHz @ 4-4-4-12(1:1) ] [LG L226WTQ 22" Widescreen] [Hitachi 320GB SATAII 7200RPM/16MB] [LG DVDRW 18x] [CoolerMaster Elite RC-333 ATX Chasis] [SB Audigy 2ZS/Klipsch Promedia GMX A2.1] [Razer Copperhead Temptest Blue] [Antec 550w Truepower Trio] [WinVista Ultimate]

trex_daemon

I need a little explanation on how Profx:MX8, for example works.
I have an sblive 0220 and i am using kx since the beginning. I managed to do a few good presets, but now i wanted to migrate to profx instead of the Xrouting and fxbus and epilog.
So, i managed to find out a lot of thing but i don't know how to do this:
I want to be able to control the level of all the 6 channels (F, Rear, C+SUBB) Reverb and Chorus. I put a few SRC with the corresponding FXBuses and i connected them to MX8. The Output of the MX8 i connected to surrounder.
But i don't know if this is correct, because has the outputs labelled Send2 ... something like this, and one of them Recording. I know what to do with that, but what about the rest ? Any help is appreciated. If you want to help, i can put the preset i made to the kx preset exchange page. Thank you.

Maddogg6

Controlling all volumes - imo - is easier using Epilog instead of Kxlt (specially since I have Multimedia keys on my PC's keyboard, and can use that volume control to control 'Master' volume.... but theres 1,000 ways to skin a cat with kX - it may depend on DSP resource usage - and what exactly you are trying to accomplish too ?? (which you didnt mention anything other than controlling all outputs?? - all outputs used separately, like surround sound? - or for monitor sends to band mates who wish to have varying levels in their 'mix'... ??)

Russ

Just thought I would mention that the current ProFx version appears to work with kX 3539.

BenOBS

I would like to know if there is an easy way to "modify" the k2lt to be able to reach the last 2 channels of a A2 ZS ? Can we modify a existing choice in the drop box to point theses outputs?

thomasabarnes

I know I don't need to tell you this, LeMury (you know I like and am used to that name), but 3538 final or 3539 is finally out. I haven't even installed it, yet.

But when I do, I would sure like to be able to use it with ProFX!

See you, oh dear fellow.

__________________

May a song always touch you in a positive way.
Sonar 8 Producer Edition, Vista Ultimate 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P
My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

ReWired

ProFX for 3538L works perfect with 3539

thomasabarnes

Thanks ReWired. That's good news.

__________________

May a song always touch you in a positive way.
Sonar 8 Producer Edition, Vista Ultimate 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P
My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

Lex Nahumury

If Epilog supports those 2 (extra??)channels you mention, then Yes, (theoreticly) is should be possible for me to modify k2lt to support them too.
However, I dont have a ZS to test/verify and frankly I know little to nothing about how a ZS differs from any 'regular' A2 card.

BTW: What KX_OUT port numbers are you reffering too?

/Lex.

Lex Nahumury

Hey Thomas,
No prob with the name.
I haven't been able to test 39 myself yet, but as the good folks here have been reporting,
it should work since Profx doesn't rely on KXGUI related stuff is and therefore less sensitive
to driver version changes.

Only if there are major changes beeing made to KXAPI (which so far has only happend once with the introduction of 38), it is necessary for me to update Profx.

(Nevertheless, it wouldn't hurt either to recompile Profx with 39 just to be sure)

Cheers,

/Lex.

cybermelcon

Okay, I'm old school, and know I'm blowing it somewhere. I followed the directions pretty carefully, and for some reason I'm not able to identify any change in the KX mixer visually. Also Since I've re-installed the KX version 5.10.0.3537 prior to downloading and um... installing this ProFX (seemingly to no avail) I can see no difference.

By no means does my KX Control Panel resemble this --> ProFx Version 3.x

But my problem isn't as much visually as it is my inability to pipe an audio saignal through the mic/line (line2) of my SoundBlaster's physical front access panel.

I'm pretty much willing to do anything to get this to function effectively. My brain is getting fried over this, and any help would be greatly appreciated.

__________________
Melcon Wagner

cbjaust

I have an Audigy (SB0090) and a LiveDrive! IR (that kx dtects a LiveBay2) and have absolutely no probs with the set-up of either the kx drivers (3538) or the ProFX plugins (props to LeMury!) and it looks the same as the link you posted.

have you made sure that the input that you want sound from is correctly configured in the kx mixer?

It's likely to be something simple like that, otherwise something must have gone awry - obviously - when you did the install.

post the output of the kx manager -> about box, maybe there's something to see...

Cheers

Russ

Those pictures are the GUI for the ProFx plugins themselves (not kX Mixer... ProFX does not change kX Mixer).

Make sure that you download the correct version of ProFx for kx 3537.

Make sure that you register the plugin (double click on the file you downloaded (after putting it where you want to keep it)).

Open the kX DSP and load the ProFx plugin that you want to use.

Double click on the plugin in the DSP window to open the GUI/Tweak window for that plugin.

TravelRec.

Hi LeMury,

would it be possible, to write a plugin like the famous MX8 in the same style (meters and scribble-stripe), but with up to 12 mono input channels with balance slider and 3 different stereo output busses, routable via buttons from each channel? This plugin should work as a monitoring / FX mixer for recording sessions. Then I could throw my dusty monitor mix plugin away, that fills up the whole screen

Thank you in advance!
TravelRec.

__________________
Always take a look behind.

Lex Nahumury

Hey TravelRec,
Possible of course, but I have switched entirly to laptops so I don't have access to a PC+CT card anymore. Actualy I was thinking of buying an Audigy PCMCIA card but that thing sucks so I bought an Echo PCMCIA instead hence no kX "joy" anymore
sry!

Estarriol

Heh Lex I own Audigy ZS & both Echo Ingidos... Yeah, output on A2ZSnb sucks, but have you ever tried to use a standard headset microphone with Echo? A2ZSnb really kicks ass with skype, I can alter the sound the way I want, and simulateneously record my dialogs (using sends)... I think A2ZSnb is really cool with all those awesome routing possibilities in a small notebook. :-)

Lex Nahumury

Yup, I guess A2ZSnb is good for skype etc.(has Mic In)
But than again, so does my notebook's crappy onboard soundcontroller/ac97

I use my stuff for Music production and audio programming,
so good driver support, and most importantly;
"Open source" drivers/HW-information is far more important to me than a buld in Mic In pre-amp.
Echo is (afaik) the only company providing source code and hw info on their
soundcard products.

I have no doubt that A2ZSnb is a good piece of hardware.
However, it is (intentionaly?) crippled by CT drivers/software.
(Much the same as with good old sblive cards, hence kx project)
Well, I'm not going to wait till CT decides to release full HW-info on A2ZSnb.

Cheers,
/Lex.

TravelRec.

Oh - that´s really a shame to lose such a great programmer I recently upgraded my system with another tower PC with lot more power under it´s case and I love the great expandability of creative PCI-cards . Hm - anyway, thank you for all.

P.S.: What´s about the current storm-tide? All okay in holland?

__________________
Always take a look behind.

Lex Nahumury

Maybe someday I'll buy a used A2ZSnb (for little money) just to fool around with it. We'll see.

I haven't noticed much from the storm tide yet.
Let's hope it stays that way! Thanks for asking.

Cheers,

/Lex

TravelRec.

Oh yes, AudigyZS2NB is a cool thing, maybe Eugene can put an eye on it to fix the current problems.

OT: It seems the great barrier before rotterdam was a good idea /OT

__________________
Always take a look behind.

rboula

Are they compatible with kx 3539 driver?

Lex Nahumury

yes.

sonofscream

and compatible with 3541?

TravelRec.

Yeess!

__________________
Always take a look behind.

gooday

good work, I like it very much

Doug W

Should 3544a work with ProFX 3538? I am having some issues and trying to find out if I just messed up the installation. 3544a seems to work fine for me with the default DSP but not with ProFX.

Thanks

Russ

Which plugin is giving you trouble? ProFx works fine for me in 3544a, but I have really only used ADC and the peak plugins thus far.

[COLOR=Gray]<edit>[/COLOR]
BTW: You are aware that FxBus uses new assignments now, right?
i.e.
Wave devices uses FxBus 0-7 now, and MIDI uses 12/13.

I just tested SRC, ADC, MX6 and kxlt and they all worked for me [COLOR=Gray](well except for the issue with the analog rear speakers with my card and kxlt)[/COLOR] with my 10k1 card.
[COLOR=Gray]</edit>

<edit2>
[/COLOR]Also [COLOR=Gray](due to the above)[/COLOR], make sure to rebuild your configs, and not load older one's [COLOR=Gray](especially if the config included kX Router info)[/COLOR].[COLOR=Gray]
</edit2>
[/COLOR]