ProFX and WinMM Recording

MontecristoCigar · Dec 24, 2006, 12:33 PM

Would somebody be so kind as to give me a quick overview on how to record with say... Windows Sound Recorder using ProFX?

I have things setup as follows for testing purposes:
[SRC (FXBus 0/1)]-[L/R] -> [In1L/In1R]-[MX6]-[RecL/RecR] -> [Out8L/Out8R]-[k2lt (WinMM Rec)]

There is clearly an output from FXBus 0/1, which I set to record and unmuted in MX6, yet I get nothing when trying to record in applications that don't support ASIO. The way I understand it, WinMM Recording just "maps" itself to Windows recording (which isn't muted), is that correct?

Any insight on this would be great!

Russ · Dec 24, 2006, 03:16 PM

Quote:

Originally Posted by MontecristoCigar

I have things setup as follows for testing purposes:
[SRC (FXBus 0/1)]-[L/R] -> [In1L/In1R]-[MX6]-[RecL/RecR] -> [Out8L/Out8R]-[k2lt (WinMM Rec)]

Make sure that recording is enabled for that channel in MX6 ("R" button should be RED, and you should see movement on the built in "Record" peak meter).

MontecristoCigar · Dec 24, 2006, 04:24 PM

Well, I'll tell you what, I'm not sure what I did, but it works now...

The record button was red before, but I wouldn't get any feedback from the record peaks. Maybe a bad connection in the DSP window?! Either way, I'm not complaining...

Chester01 · Dec 25, 2006, 12:45 AM

also be sure to have your x-tram enabled, otherwise windows mm recording wont work properly (I do not know the minimum amount of x-tram, set in 'Settings ->Setup Buffers').

MontecristoCigar · Dec 25, 2006, 11:07 AM

Quote:

Originally Posted by Chester01

also be sure to have your x-tram enabled, otherwise windows mm recording wont work properly (I do not know the minimum amount of x-tram, set in 'Settings ->Setup Buffers').

Hm... Good advice. Thanks!

So many things I didn't know about from when I was just using kX "out of the box". I've got alot to learn!

Things have been sounding a heck of alot better since I've leanred to use the DSP window properly though.

chezca · Nov 19, 2008, 09:27 AM

goog

Dec 24, 2006, 12:33 PM	#1
MontecristoCigar DriverHeaven Newbie Join Date: Dec 2006 Posts: 8 Rep Power: 0	ProFX and WinMM Recording Would somebody be so kind as to give me a quick overview on how to record with say... Windows Sound Recorder using ProFX? I have things setup as follows for testing purposes: [SRC (FXBus 0/1)]-[L/R] -> [In1L/In1R]-[MX6]-[RecL/RecR] -> [Out8L/Out8R]-[k2lt (WinMM Rec)] There is clearly an output from FXBus 0/1, which I set to record and unmuted in MX6, yet I get nothing when trying to record in applications that don't support ASIO. The way I understand it, WinMM Recording just "maps" itself to Windows recording (which isn't muted), is that correct? Any insight on this would be great!

Dec 25, 2006, 12:45 AM	#4
Chester01 DriverHeaven Senior Member Join Date: Jan 2004 Location: St. Cloud, MN Posts: 487 Rep Power: 0	also be sure to have your x-tram enabled, otherwise windows mm recording wont work properly (I do not know the minimum amount of x-tram, set in 'Settings ->Setup Buffers'). __________________ COMP: Dual Intel PIII 733 Mhz; GeForce 4 Ti 4600; 1.128 Gb RAM; SB0350 (Audigy 2 ZS Platnium) STEREO(I UPGRADED):Crown Audio K1 and K2 amplifiers (4000 watts at .1% THD ), JL 13w7 Subwoofer (6.5 CF) (2) 18" PR's, Klipsch SB-1's, some cement blocks for speaker stands...

Nov 19, 2008, 09:27 AM	#6
chezca DriverHeaven Newbie Join Date: Nov 2008 Posts: 1 Rep Power: 0	Re: ProFX and WinMM Recording goog

Dec 24, 2006, 04:24 PM	#3
MontecristoCigar DriverHeaven Newbie Join Date: Dec 2006 Posts: 8 Rep Power: 0	Well, I'll tell you what, I'm not sure what I did, but it works now... The record button was red before, but I wouldn't get any feedback from the record peaks. Maybe a bad connection in the DSP window?! Either way, I'm not complaining...