Mr. Ulmo

I have an Acer Aspire 7720G, with a Mobility Radeon HD 2600.

I use Windows XP SP2

Catalyst Software Suite v7.11

Lightsmark 2007 gives error :
ERROR: OpenGL 2.0 capable graphics card is required.

Other OpenGL apps works, but are wery slow, like there is no hardware acceleration

OpenGL does not work,
DirectX works

Everything else is working without a hitch

dadaniel

The Mobility Radeon X2500 in my Acer Travelmate 5720G is detected as X1700! Whats wrong?

PiDesign

I use HP-Compaq 8510p dual boot XP (with Vista pre-installed). Follow each modded installing step without any problems but finally XP could not see the new driver Catalyst 7.11 I'm not sure what's wrong... Anyone could hepl???...
I'm not sure that installing Catalyst on drive D XP) is right or have to switch to drive C Vista)???

cebolao

Wow, seems like there are alot of people here having problems with the HD2600!
Does any other owner of a HD2600 have this:

I also got a very odd problem on my ASUS F3SA-A1 HD2600 512Mb, and wondering if any of the gurus could shine some light on this.

I cant display a native resolution of 1680X1050 on a 22 inch screen.
Tried 4 different monitors, tried catalyst 7.4 all the way to 7.11! Tried PowerStrip. Tried Ati tools. NOTHING WORKS I asked people from notebookreviews, and called the vendors, and nothing. And finally i got a reply from Asus tech support saying it that theres a driver being developed for this:
[COLOR=#000080]version is V8.44-071116a1-056577C_logo_Vista32_64.[/COLOR]

[COLOR=white]Does this make any sence to any of you gurus?[/COLOR]
[COLOR=#ffffff]Detailed description of this proble is at this thread:[/COLOR]
ASUS F3SA-a1 DIV output no higher than 1440X 900! - Page 7 - Notebook Forums and Laptop Discussion

Any tips would be great!
thanx

BTW i have a case number at asus: 192-923
If you have the same issue, call them and include your name with the above number. Maybe that will speed things up with the fix

pmedicmatt

recently upgraded to vista 32. inspiron 1501, amd turion x64, radeon 1150, 2G ram. have tried every avail latest versions 7.10-7.12 of catalyst/drivers from ati/dell. have even tried the mobmoddy per your instructions. Nothing has helped. Upon install/reboot, get blue screen with jumbled/flickering white squares after logging into vista and then shuts down to restart in safe mode. Then I have to system restore to an earlier point. Only thing that works is to allow vista to install shadow copy of generic driver which recognizes the radeon 1150 as radeon 200m. Please help!!!! Any thoughts/recommendations on just doing a clean install with vista 64?

cotas33

well i am wondering if i was suppose to mod vista to or how does it work cause when i browse to the folder like told on here i hit modify and it just freezes ...... im h=gessing im doing something wrong:P


need a tip or 2 thankx

cotas33

ahhh never mind i had a brain fart i forgot to extract it first:P

thankx it did the job !!!

kromar

hi, i need some help with this. i have a ibm t40p with a ati mobility fire gl 9000 what driver do i need exactly for this card?

Drakeero

I know that this is a really newbie question, but I am having trouble finding the download for the Mobility Modder. I checked the link at the top of the screen, however the page it leads me to does not have a download link. The image halfway down the screen is just that, an image.

I do use Firefox because Internet Explorer is bugged and won't run. I do use a scriptblocker but I have allowed Driver Heaven through. On the download page it does not notify me of any other websites trying to execute scripts.

I have completely cleared my cache, cookies, and browsing history and have had no change.

If it helps any to note... when I tried to log into Driver Heaven to post on these forums the icicles got in the way and I was unable to input my username. I had to block all images from Driver Heaven in order to log in. I went back to the download page and now there isn't any hint of a download link anywhere.

Akalabeth

Hi all,

I have an Acer 7720G with ATI Mobility Radeon HD 2600.

The last week i installed XP Sp2 and the 7.11 Catalyst with the help of the great Mobility Modder.
Today i see the 7.12 Cata, i tried to install them in the same manner as the 7.11 but nothing ç_ç...
I receive the error: "Setup did not find a driver compatible whit this hardware or software configuration" or something like that (the same error that i "bypassed" with the MobyModder with 7.11).

EDIT: Trying to reinstall the 7.11 and now i receive the same error O_o

Can someone help me?

Thanx in advance

fergard

Got the same problem as a little higher has posted. I've gor Acer Aspire 4920G with X2500 card, but after such "patching" new driver recognizes it like X1700... The interresting thing is that DirectX 10 works correctly and all my perfomance has not changed... That is only a "grammar" mistake, or there's something more than just incorrect label of video-card?

nelvinchi

Hi - i hope someone can help!!
I have an IBM X31 running Vista, but i can't find out exactly which card i have - the chipset is reported as ATI MOBILTY RADEON - i think it's a ATI Mobility RADEON M6C-16h - does anyone know if the card is know as anything else/model number etc?
I have tried running the modded driver install, but the ATI Installmanager app crashes with DetectionManager.dll as the faulting module.

I'm currently using the Microsoft Standard VGA Graphics Adapter - which is pants!

Any help would be appreciated - even if it's confirmation that i won't get a non-generic diver to work!

Thanks!

**Edit**

I think the card is either a ATI Mobility Radeon 7000 or 7500 - i note that on the supported video card list for XP, the 7500 is supported, and so is the ATI Mobility RADEON - any chance of VISTA support for these cards?

By the way, my device ID's are:
PCI\VEN_1002&DEV_4C59&SUBSYS_052F1014&REV_00
PCI\VEN_1002&DEV_4C59&SUBSYS_052F1014
PCI\VEN_1002&DEV_4C59&CC_030000
PCI\VEN_1002&DEV_4C59&CC_0300

PLEASE HELP ME!!!

MANY THANKS IN ADVANCE!!

Thalys

Hello,...

I searched for a site with all resolutions supportet by your software. This is because i habe a ASUS Laptop with a ATI HD2600 Card with 512 MB. I wanted to connect ist to my LCD-TV with 1366x768 resolution, but the driver shipped with the book only supports 1280x768. I have little black spaced at the sides.
I looked on your side but didn't find something that could give me the information if i use your tool, that i will surely have this resolution.
So i'm asking here. When using your software with the latest catalyst driver, is it possible to switch to 1366x768 resolution?
Thanks in advance... and please excuse my bad english, i am from germany...

Sincerly ... Thalys

SuperShadow

Any chance on getting support for the Mobility FireGL 5600? From the PCI DeviceID it appears to be a HD 2600 with different subsystem tag:

HP/Compaq 8510w
ATI Mobility FireGL V5600

Here are the 2 lines out of the driver inf from HP that works (and that match my PCI info):

"ATI Mobility FireGL V5600" = ati2mtag_M76, PCI\VEN_1002&DEV_9581&SUBSYS_30DF103C
"ATI Mobility Radeon HD 2600" = ati2mtag_M76, PCI\VEN_1002&DEV_9581&SUBSYS_30C5103C

Thanks,

almaster666

hey
i have a toshiba satellite with ATI Mobility Radeon x1400
Intel Centrino Duo 1.6GHz
1024Mo
Windows XP Home SP2
i ran the modder

when i try to run the setup from: C:\ATI\SUPPORT\7-12_xp32_dd_ccc_wdm_enu_55811\Driver

i get a message saying "Setup did not find a driver compatible with your hardware or operating system. Setup will now exit."

please help

__________________
Toshiba Satelite A100-662
ATI Mobility Radeo x1400 (512MB)

eastcoast

whenever I close and then open the lid of my laptop, all the icons get rearranged and open windows get resized. it's as if the screen resolution is being decreased and then increased again.

I have a HP 8510p notebook. it has a ATI HD 2600 graphics card inside. I installed the latest catalyst driver with the modtool.

anyone else had that problem with cat 7.12?

pcpanik

The Mobility Modder worked fine with my Acer 7720G and Vista 32Bit.

Now i've changed to Vista 64 bit and got problems.

After modding and installing 7.12 Driver and Catalyt, my external EIZO L885 (20,7") display only works with 1280x1024 instead of 1600x1200px. It's found as a Plug&Play display.

I've uninstalled 7.12 and tried out original acer driver. But with the result, that it says, that the ATI driver doesn't work or is not installed right.

Without any driver I can set the resolution to 1600x1200px but the picture is quiet bad and it flickers. (Not in 1280x1024)

So I've changed back to the modded 7.12, but the resolution problem is still here.

My Graphic Card is the HD2600. Maybe it can't work at 1600+1200 or with an EIZO L885 ?

Anyone who can help me please? Thanks.

aminetirecht

Please HELP !

i have a NOOTBOOK FUJITSU SIEMENS lifebook E7010 with " ATi Radeon Mobility 7500 (LW) (M7) "

i have downloaded the driver for my video card from Fujitsu Siemens Computers

there is only one driver and it's out of date /2002/ and i have problems with newer Games

like" World of warcraft (c)2004 "

-----

I have installed the Lastest Driver for ATi from www.driverheavendownload.net

it work but it Disabled the Direct3D .. Error WHCL signature .. and i cant test the Direct3D ..

there is only the DirectDraw ..

and i have the same problem with OmegaDrivers ..

-----------------------------------------------------------------

i tired searshing for drivers for a long time .. PLEASE HELP ME !

and this is my Full configuration
----------------------
Machine name: USER
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: FUJITSU SIEMENS
System Model: LIFEBOOK E7010
BIOS: PhoenixBIOS 4.0 Release 6.0.
Processor: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz
Memory: 510MB RAM
Page File: 156MB used, 1092MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode


-------------

ERROR :

manufacturer. Direct3D functionality not available. You should verify that the driver is a final version from the hardware manufacturer.

-----------------------------

PLEASE HELP ME !! ..

Tell me what to do . and what driver i should download

what is the solution of my problem .?

and Sorry For the Bad English /

and THANK YOU VERY MUSH

SpooZ

Thanks alot for a great program.
Modified the latest catalyst 8.1 Beta. and it works great on vista ultimate x64 SP1 on my HP/Compaq nx9420 with ATI Mobility X1600

SSilence

Well, I just installed Catalyst 8.1 after a "passage through" the Mobility Modder: the result is simply perfect! Only the screen refresh rate decides by himself to be 59 Hz instead of 60 Hz any time I start the computer, but I don't think it is a Mobility Modder related problem: it appeared since Cat 7.11, not before (I use the MM since Cat 7.4).
Your program is perfect, thank you for your work!

__________________
My computers - Laptops
1)Packard Bell Easynote R8770. Centrino@1.8GHz Dothan, 1GB DDR333 ram, 100GB hdd, Ati Mobility Radeon 9700 128MB, Vista Ultimate SP1;
2)Compaq Presario v6131EU. Turion64X2 tl-50@1.6Ghz, 1GB DDR667 ram, 100GB hdd, GeForce Go 6150, XP Media Center.
My computers - Desktops
1)AMD Duron@1.0GHz Morgan, 256MB ram, 20GB hdd, MoBo ECS K7VZA, Asus v9400 Magic 128MB, Win 2000 Professional; (Out of order: PSU failure damaged MoBo)
2)Intel Pentium4HT@3.2GHz Prescott, 1GB DDR2 400 ram, hdd1 200GB & hdd2 500GB (both SATA II, 16 MB cache), chipset Ati Xpress200, Nvidia GeForce 6800GS 256MB, Vista Ultimate SP1. (Still resisting to time attacks...)

nico-tt

Hello all,

I have been experiencing the following problems with Mobility Radeon 9000 IGP; and Mobility Modder 4 (V 0.8.8.0) and the game Half Life Episode 2:

I can run HL2 and HL2 Episode 1; but when I try to run Episode 2 with Cathalyst 6.2 modded with the Modder it says the driver is out of date and when I choose continue anyway it says it needs Direct X 8, even if the card supports 9......; I have tried with modded Cathalyst 7.12; 7.11; 7.10; 7.9 and the game starts says "loading" and then it throws me away to the desktop....

Apart from that Direct X 9 tests all pass; everything else runs smoothly but with these game I have a problem..

All help will be strongly appreciated

Thanks in advance

p.s. the laptop is HP-Compaq nx9110; Intel Pentium 4 3.2GHz; 1.12 GB RAM+128 MB shared for the video

alucard_uk

hey guys i just installed the 7.12 modded drivers on my mobility radeon x600 and the ccc doesn't start up it gives me this error message:

Could not load file or assembly 'CLI.Implementation, Version=2.0.2895.26427, Culture=neutral, PublicKeyToken=90ba9c70f846762e' or one of it's dependencies. The system cannot find the file specified.

anyone know what it is? thx a lot

zedox

I modded the latest 8.1 catalyst driver for xp to use with my X2300

When I point the Device Manager to the modded files it begins to copy them over then asks for a file that it can't find...

"The file 'atiolglg.xml' on ATI Technologies Inc. Installation DISK (VIDEO) is needed."

Any help would be appreciated!

Qiac

Hi
i have installed the latest 8.1 catalyst driver and i have ati mobility radeon hd 2600 xt
when i put monitor by DVI to my laptop i cant get the 1680x1050 resolution allthough the monitor
supports it
i would appreciatate any help!

ilyeah

hi!
i have ASUS G2Pb laptop with ATI X1700
new runing under winxp sp2 mce
i want to change my os to vista 32

[COLOR="RED"]question: may i modify latest ati driver for vista 32( now 8.1) under XP and after upgrade to vista use this modified driver?[/COLOR]

p.s. sorry 4 my bad english

Miguel_k

Hi

I have the info you need to add the HD 2700:

Card name: ATI Mobility Radeon HD 2700
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x9583)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9583&SUBSYS_11071734&REV_00
Display Memory: 2034 MB
Dedicated Memory: 243 MB
Shared Memory: 1791 MB
Current Mode: 1920 x 1200 (32 bit) (59Hz)
Monitor: Standard PnP-skærm
Driver Name: atiumdag,atiumdva,atiumd64.dll,atiumd6a.dat,atitmm 64.dll
Driver Version: 7.14.0010.0549 (English)
DDI Version: 9Ex
Driver Attributes: Final Retail
Driver Date/Size: 1/13/2008 19:59:35, 3117568 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D6C3-11CF-A176-0D31A1C2CA35}
Vendor ID: 0x1002
Device ID: 0x9583
SubSys ID: 0x11071734
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled

Name: ATI Mobility Radeon HD 2700
Device ID: PCI\VEN_1002&DEV_9583&SUBSYS_11071734&REV_00\4&32D D34CB&0&0008
Driver: n/a

Let me know if you need more info.

Thanks for making the modder, it's great!

Arkitek22

This program is really good. Thanks a lot, I updated my ATI Mobility Radeon X600.

Greatful guy here!!!

crosswine2000

[COLOR=white]Hello! I'm just a newbie here. The latest ATI driver is Catalyst 8.2. Will this do with your modder? I have an old Sony PCG-K35 with an ATI IGP 345M and my search for an update led me to this forum. Can I use your modder on this unit? I've been having some problems lately (ATI External Event Utility Module has ecountered a problem and needs to ...). Does updating my driver address this problem? Also, the ATI downloads page has broekn down the download. What happens if I choose to download only that for Display Drivers? Thanks. Any input will be much appreciated.[/COLOR]
[COLOR=white]Here are some of my unit's specs.:[/COLOR]

[COLOR=white]Mobile Intel[/COLOR]

[COLOR=white]® Pentium® 4 Processor[/COLOR]

[COLOR=white]532 (3.06GHz1, 1MB L2 Cache)[/COLOR]

[COLOR=white]Front Side Bus Speed[/COLOR]

[COLOR=white]533MHz[/COLOR]
[COLOR=white]Chipset[/COLOR]
[COLOR=white]ATI Radeon™ IGP 345M[/COLOR]
[COLOR=white]Integrated Wireless LAN[/COLOR]
[COLOR=white]IEEE 802.11b/g[/COLOR]

[COLOR=white]LCD[/COLOR]

[COLOR=white]15.4” WXGA with XBRITE™[/COLOR]

[COLOR=white]Technology (1280x800)[/COLOR]
[COLOR=white]Hard Drive[/COLOR]
[COLOR=white]80GB[/COLOR]

[COLOR=white]Memory[/COLOR]

[COLOR=white]1GB[/COLOR]

[COLOR=white]Graphics[/COLOR]
[COLOR=white]ATI Radeon™ IGP 345M[/COLOR]
[COLOR=white]128MB Video RAM (shared w/ Main[/COLOR]
[COLOR=white]Memory)[/COLOR]

SSilence

I keep modifying every new version of the Catalyst using your Mobility Modder and everything runs finely on my Mobility 9700: allright both with Cat 8.1 and 8.2.
Just a pair of questions (just for "culture", since I keep the CCC because it's ATi official, but I only use the Ati Tray Tools):
1. Can I mod the drivers only or do I have to download & edit the "drivers + English CCC" package?
2. What do I have to do if I want the CCC language to be for example Italian (since I am Italian, you see...)?
In other words: does the Mobility Modder affect also the CCC or the drivers only?
Thank you and go on this way!

__________________
My computers - Laptops
1)Packard Bell Easynote R8770. Centrino@1.8GHz Dothan, 1GB DDR333 ram, 100GB hdd, Ati Mobility Radeon 9700 128MB, Vista Ultimate SP1;
2)Compaq Presario v6131EU. Turion64X2 tl-50@1.6Ghz, 1GB DDR667 ram, 100GB hdd, GeForce Go 6150, XP Media Center.
My computers - Desktops
1)AMD Duron@1.0GHz Morgan, 256MB ram, 20GB hdd, MoBo ECS K7VZA, Asus v9400 Magic 128MB, Win 2000 Professional; (Out of order: PSU failure damaged MoBo)
2)Intel Pentium4HT@3.2GHz Prescott, 1GB DDR2 400 ram, hdd1 200GB & hdd2 500GB (both SATA II, 16 MB cache), chipset Ati Xpress200, Nvidia GeForce 6800GS 256MB, Vista Ultimate SP1. (Still resisting to time attacks...)

Spike

Thanx everyone for the responses. i will need to look into the new chipsets and add those with the subsys numbers

SSilence the modder is written to mod all, but you can always select the driver only when you install the driver after modding it.

For the Direct3D problems that some have i need to look into that.

__________________