digital out problems with Emu APS & kx

DasKapital · Jun 2, 2004, 08:08 AM

I have a problem hooking my Emu APS to my external DAC via the digital out on the E-drive. There is simply no sound...
If I choose "reset settings" in the settings menu I get sound output to the dac for about half a second. Then silence.
What could be wrong? I'm running the latest version of kx and I have win XP on a PIII 700Mhz. Emu APS.
Any suggestions would certainly be helpful.

Best regards,
Rickard

TravelRec. · Jun 4, 2004, 02:29 AM

Hi!

Check in kxmixer if all digital out faders are unmuted and at proper level. Check also in DSP if your digital out is connected to the sound source. Look on epilog for wires going to the desired output.

Greetings!

TravelRec.

miguel · Jun 4, 2004, 08:03 AM

I think the signal from front speakers is not routed to that out by default. you have to rewire in the DSP, have you done that? It's rather simple. In the default dsp the main signal goes from Timbre to A1/A2 in epilog. A1/A2 is the analog out in the card.

All you should need is to rewire that cable pair to your selected output. I think D1(L-R) is the digital out on the e-card and D2 (labeled A3/D2L and A4/D2R) is the digital out on the e-drive.

Just in case, are you using the MOC (multi output card) with the APS?