3543 bug reports (24 bit asio, E-DSP)

**Eugene Gavrilov** · Jul 16, 2008, 07:29 PM

please report your bug reports here

E.

lhyyy · Jul 17, 2008, 07:04 AM

ASIO can not work in vista sp1

and the ASIO control panel can not open

card is sb0350 10K2

JGSF · Jul 17, 2008, 12:25 PM

Hi!

reporting...

1820/1212 v1 (both based on the em8810 1010 card)

No analog sound output, and can't initialize the audiodock, v3542 works fine.

dsp peak meter shows activity though.

What additional information should I provide?

thanks

**Eugene Gavrilov** · Jul 18, 2008, 03:39 PM

JGSF:
try 'edspctrl -defaults' from the command line
it will reset your card details and upload the firmware
if this does not work, capture edspctrl output and send it by e-mail

E.

JGSF · Jul 18, 2008, 04:11 PM

edspctrl -defaults did it.

Thank you...

and sorry, I didn't know about this.

Maddogg6 · Jul 19, 2008, 12:52 AM

24/48 does work now. (did not in 3538M - I never tested 3539/3540/3541/3542)

and 24/96 WDM still doesn't seem to do any SRC - and All I have is 48khz SPDIF sources.

But, I was under the impression the Master Volume sliders were removed - that must just be in Vista...

Heres my about info...

Quote:

----Hardware / Software configuration---------------
Driver Name:kX Audio Driver (Debug)
Driver Date: Jul 17 2008 03:17:25
Driver Version: 5.10.00.3543 - debug
DB Name:LiveBay2
SB0350 10k2 [b800]
PCI Information:
Device: 41102 Subsys: 20021102 ChipRev: 4
Card is '10k2'
Card has MPU device
Card model is '5.1'
Card is Audigy2-compatible
Card HAS AC97 codec
Codec name: Unk AC97-codec [83847650]
3D Extension: SigmaTel 3D Enhancement
Codec is 2.0 compliant
Capabilities[6a90] : -headphone out-
DAC resolutions : -16-bit- -20-bit-
ADC resolutions : -16-bit- -20-bit-
Ext Capabilities [605]: -var rate PCM audio- -slot/DAC mappings-
Port: b800 Irq: 0x7(7)
Playback buffer: 20a0
Record buffer: 4000
Number of AC3 buffers: 4
Tank memory: 256 kb
GSIF buffer: 256 samples
OS version: [2 5 1 Service Pack 2; 2 5 1 Service Pack 2; 156 148]

Guess my needing windex was 'pre-mature'

(edit: mostly because I read '24/96' when it is '24/48' - doh!) - but its definitely a step in the right direction - and could prove useable /edit)

Any case - I meant no offense in my only thanking E. - Thanks to *every one* who contributes in any way to kX project.

I'll have to load some older 16/48 projects to see how ASIO performance stacks up against V3538M. Will report back with anything significant.

Thanks again everyone.

edit: there seems to be a very slight clicking that wasn't present in 3538M - CPU useage seems a little more too as well - in Default, and all 10K2 timing modes. Increasing Latency had no effect on the clicking sound. /edit

dejovu · Jul 19, 2008, 04:57 PM

Thank you for such a nice software.

My PC has three audigy2(one sb0240 with drive and two sb0244) cards and one E-MU 0404 card.
audigy2 cards work,but E-MU 0404 card doesn't output anything.
'edspctrl -defaults' said that
http://www.driverheaven.net/attachme...1&d=1216500968
'...
==== Current E-DSP status
Card: 'SB0240 10k2 [8000]
...'.
Does 'edspctrl' initialize only one card or drive?

If my mistake or stupidity caused it,I'm sorry.

XP SP3,Athlon64 4800+(AM2),4GB RAM(3.5GB available)

JGSF · Jul 20, 2008, 01:16 AM

Quote:

Originally Posted by Maddogg6

(...)there seems to be a very slight clicking that wasn't present in 3538M - CPU useage seems a little more too as well - in Default, and all 10K2 timing modes. Increasing Latency had no effect on the clicking sound. /edit

I am having clicks in the default asio mode too, but map/irq/event mode solves it here.

Eugene said in another thread that 24-bit transfers are not fully hardware-accelerated, so maybe that explains the extra cpu usage.

Maddogg6 · Jul 20, 2008, 01:37 AM

Quote:

Originally Posted by JGSF

I am having clicks in the default asio mode too, but map/irq/event mode solves it here.

Eugene said in another thread that 24-bit transfers are not fully hardware-accelerated, so maybe that explains the extra cpu usage.

It happens in 16/48 playback. I'll try that mode - thanks.

JGSF · Jul 20, 2008, 11:40 AM

Oh, ok... I was using 24/48.

JGSF · Jul 20, 2008, 12:03 PM

Quote:

Originally Posted by dejovu

Thank you for such a nice software.

My PC has three audigy2(one sb0240 with drive and two sb0244) cards and one E-MU 0404 card.
audigy2 cards work,but E-MU 0404 card doesn't output anything.
'edspctrl -defaults' said that
http://www.driverheaven.net/attachme...1&d=1216500968
'...
==== Current E-DSP status
Card: 'SB0240 10k2 [8000]
...'.
Does 'edspctrl' initialize only one card or drive?

If my mistake or stupidity caused it,I'm sorry.

XP SP3,Athlon64 4800+(AM2),4GB RAM(3.5GB available)

I don't know if edspctrl also recognizes the "$" parameter but you could try:

edspctrl -defaults $<number>

where <number> will be 0,1,2 or 3, depending of the card order

dejovu · Jul 21, 2008, 07:40 AM

Quote:

Originally Posted by JGSF

I don't know if edspctrl also recognizes the "$" parameter but you could try:

edspctrl -defaults $<number>

where <number> will be 0,1,2 or 3, depending of the card order

Thank you.
I tried immediately.

But they output the same message as 'edspctrl -defaults'.

Russ · Jul 21, 2008, 01:05 PM

Quote:

Originally Posted by JGSF

I don't know if edspctrl also recognizes the "$" parameter but you could try:

edspctrl -defaults $<number>

where <number> will be 0,1,2 or 3, depending of the card order

With kX Console the "$" parameter needs to be the first parameter. In any case, edspctrl does not currently support that parameter.

@dejovu
You can try this version if you want, which includes the (optional) "$" parameter (should be the first parameter). It is untested as I do not have an EMU card (nor multiple cards for that matter), but I do not think you should have any problems with it.

i.e. (usage)
edspctrl2 $<number> -defaults

JGSF · Jul 21, 2008, 04:23 PM

Quote:

Originally Posted by Russ

With kX Console the "$" parameter needs to be the first parameter. In any case, edspctrl does not currently support that parameter.
(...)

Oops, didn't know.

Sorry then, I hadn't used the $ parameter since kx drivers incorporated the 2nd ac97 codec routing options in the main panel, and to be honest, never realized about the parameter order before.

dejovu · Jul 21, 2008, 04:56 PM

Quote:

Originally Posted by Russ

With kX Console the "$" parameter needs to be the first parameter. In any case, edspctrl does not currently support that parameter.

@dejovu
You can try this version if you want, which includes the (optional) "$" parameter (should be the first parameter). It is untested as I do not have an EMU card (nor multiple cards for that matter), but I do not think you should have any problems with it.

i.e. (usage)
edspctrl2 $<number> -defaults

It's just perfect.　My E-MU 0404 have begun to sing.

Thank you very much,and I'm sorry for my poor poor English.

It's my successful message.
>edspctrl2 $3 -defaults
==== E-mu E-DSP initialization
==== FPGA appears to be already programmed
==== Dock is not connected
==== E-DSP Parameters were reset to defaults
==== Current E-DSP status
Card: 'E-0404 10k8 [9800]'
Options: 1 - Hamoa
Hana ID: 15
Versions: 1.1, 31.31, 31
Dock is Powered-On. [0x1]
WClock: 0 [Int 48]
Def clock: 48000
HANA is UnMuted
HANA IRQs: f
SPDIF mode [10]:
Out: Consumer
In: Consumer; Not Valid
Optical Type: [3] -- Input: ADAT, Output: ADAT
MIDI In: 0202, none [1]
MIDI Out: c
LEDs: 0 12 0
ADC pads: f - Dock_1 Dock_2 Dock_3 0202_1
DAC pads: 1f - Dock_1 Dock_2 Dock_3 Dock_4 0202_1
Dock misc: [0] DAC mute: 0000 headphones: 0
ADAT Locked : 24000
SPDIF Locked : 192000
BNC Locked : 24000
SPDIF Locked : 24000
reg 14-1f:[1f] [1f] [1f] [1f] [0] [0] [0] [0] [1f] [1f] [1f] [1f]
reg 30-3f:[1f] [1f] [1f] [1f] [1f] [1f] [1f] [1f] [0] [0] [1f] [1f] [1f] [1f] [1f]

Russ · Jul 21, 2008, 10:33 PM

Quote:

Originally Posted by JGSF

Oops, didn't know.

No biggie, I only mentioned it so as to not confuse any kX newbies. In any case, you had the right idea.

Quote:

Originally Posted by dejovu

Thank you very much,and I'm sorry for my poor poor English.

Glad I could help

JGSF · Jul 22, 2008, 10:21 AM

Hey guys... could you see if this happens to you to?

- have an asio app running
- save the default dsp settings
- load the dsp settings from the file you saved

no sound

Russ · Jul 22, 2008, 10:36 AM

Quote:

Originally Posted by JGSF

Hey guys... could you see if this happens to you to?

Do you mean people with EMU cards?
I tested with my live card and had no problems...

JGSF · Jul 22, 2008, 11:07 AM

Quote:

Originally Posted by Russ

Do you mean people with EMU cards?
I tested with my live card and had no problems...

I meant all...

It seems to be an issue with emu cards then.

JGSF · Jul 23, 2008, 01:07 PM

fxbus32 seems to cause it (audigy2's have fxbusX instead in the dsp).

If I save a setup that doesn't use it, I still have audio output when I load it again.

dxg · Jul 27, 2008, 12:06 AM

Sound doesn't work.. using 10k2 (audigy2zs), vista sp1.
I get weird static, noises and things.
Sort of like I use to before the 4GB ram issue was fixed..

Doesn't matter which output device I try.. master, 4/5, HQ, windows can't create test sound.

Jul 16, 2008, 07:29 PM	#1
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,037 Rep Power: 56	3543 bug reports (24 bit asio, E-DSP) please report your bug reports here E.

Jul 17, 2008, 07:04 AM	#2
lhyyy DriverHeaven Newbie Join Date: Jan 2008 Posts: 4 Rep Power: 0	ASIO can not work in vista sp1 and the ASIO control panel can not open card is sb0350 10K2 Last edited by lhyyy; Jul 17, 2008 at 07:11 AM.

Jul 17, 2008, 12:25 PM	#3
JGSF DriverHeaven Senior Member Join Date: Jul 2004 Posts: 450 Rep Power: 0	Hi! reporting... 1820/1212 v1 (both based on the em8810 1010 card) No analog sound output, and can't initialize the audiodock, v3542 works fine. dsp peak meter shows activity though. What additional information should I provide? thanks Last edited by JGSF; Jul 17, 2008 at 05:26 PM.

Jul 23, 2008, 01:07 PM	#20
JGSF DriverHeaven Senior Member Join Date: Jul 2004 Posts: 450 Rep Power: 0	fxbus32 seems to cause it (audigy2's have fxbusX instead in the dsp). If I save a setup that doesn't use it, I still have audio output when I load it again. Last edited by JGSF; Jul 27, 2008 at 01:37 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kX ASIO not working/ASIO Control Panel will not open	Russ	ASIO	24	Jul 18, 2008 07:32 AM
Microsoft Exchange bug?	MitchRapp	Applications, Software and Tweaking	0	Jul 16, 2008 02:50 PM
AMD Radeon HD 4870 X2 1GB Preview - R700 a bit early	Iria	Other Tech News	1	Jul 15, 2008 12:22 PM
ASIO Monitoring & Latency Weirdness (Good news for ASIO users!)	Nappylady	General Discussion	1	Mar 10, 2005 09:17 AM
Nero 6 Recode introduces 'bug' that could wipe hard drive	Dom	Other Tech News	0	Jul 31, 2003 01:37 PM

Jul 18, 2008, 03:39 PM	#4
Eugene Gavrilov kX Project Lead Programmer and Coordinator Join Date: Dec 2002 Posts: 3,037 Rep Power: 56	JGSF: try 'edspctrl -defaults' from the command line it will reset your card details and upload the firmware if this does not work, capture edspctrl output and send it by e-mail E.

Jul 18, 2008, 04:11 PM	#5
JGSF DriverHeaven Senior Member Join Date: Jul 2004 Posts: 450 Rep Power: 0	edspctrl -defaults did it. Thank you... and sorry, I didn't know about this.

Jul 19, 2008, 04:57 PM	#7
dejovu DriverHeaven Newbie Join Date: Jul 2008 Posts: 3 Rep Power: 0	Thank you for such a nice software. My PC has three audigy2(one sb0240 with drive and two sb0244) cards and one E-MU 0404 card. audigy2 cards work,but E-MU 0404 card doesn't output anything. 'edspctrl -defaults' said that http://www.driverheaven.net/attachme...1&d=1216500968 '... ==== Current E-DSP status Card: 'SB0240 10k2 [8000] ...'. Does 'edspctrl' initialize only one card or drive? If my mistake or stupidity caused it,I'm sorry. XP SP3,Athlon64 4800+(AM2),4GB RAM(3.5GB available)

Jul 20, 2008, 11:40 AM	#10
JGSF DriverHeaven Senior Member Join Date: Jul 2004 Posts: 450 Rep Power: 0	Oh, ok... I was using 24/48.

Jul 22, 2008, 10:21 AM	#17
JGSF DriverHeaven Senior Member Join Date: Jul 2004 Posts: 450 Rep Power: 0	Hey guys... could you see if this happens to you to? - have an asio app running - save the default dsp settings - load the dsp settings from the file you saved no sound

Jul 27, 2008, 12:06 AM	#21
dxg DriverHeaven Newbie Join Date: Mar 2005 Posts: 9 Rep Power: 0	Sound doesn't work.. using 10k2 (audigy2zs), vista sp1. I get weird static, noises and things. Sort of like I use to before the 4GB ram issue was fixed.. Doesn't matter which output device I try.. master, 4/5, HQ, windows can't create test sound.