Install Audigy4 drivers on your SB Live!/Audigy/Audigy 2/Audigy2 ZS

pepeluis · Jan 17, 2005, 09:14 AM

I use windows mixer and doesn't work. My mic only works with official Auidigy 2 oem drivers. The modded drivers disables microphone

and I have to enable the internal sound card only for mic and work with both.

thomasabarnes · Jan 17, 2005, 09:46 AM

First, if you are using onboard sound, disable it in BIOS and uninstall the onboard sound driver. If you followed the instructions I wrote in my previous post and your mic still doesnt work, all I can say is make sure you completely uninstalled all the soundcard software and drivers, and use Driver Cleaner in safe mode. Also use Cab Cleaner: http://driverheaven.net/showthread.php?t=56277

Then, reinstall the Creative_PAX-NewYearv1.2 release.

If your mic doesnt work after this, I dont know what's wrong.

vick04 · Jan 17, 2005, 10:19 AM

what happened to support for audigy in 1.2? :\ i tryed to install it and it said the device is not reconized

pepeluis · Jan 17, 2005, 11:28 AM

thomasabarnes I try it but doesn't work. Only mic with normal drivers

thomasabarnes · Jan 17, 2005, 11:29 AM

I have an Audigy, and I'm using v1.2. Recheck that you properly uninstalled the previous driver.

classic_leon · Jan 17, 2005, 12:01 PM

pepeluis, I think the problem is that a part of Audigy2 OEM's circuit and ID files are removed by Creative. Hence, OEM's DAT file cannot 100% match for Audigy2 ZS's if your card has been modded to be Audigy2 ZS.

thiruvil · Jan 17, 2005, 12:44 PM

Is it possible to get 7.1 sound out of an Audigy 2 oem with these drivers. I selected 7.1 but I can't get side right to output so I assume this is a hardware issue?

classic_leon · Jan 17, 2005, 01:10 PM

You can't directly get it to 7.1,'cos Audigy2 ZS has one more DAC than Audigy2 OEM. But you can get 7.1 through adding one more DAC, if you have a build-in sound card on your mobo with SDPIF_IN. Check Audigy2_EXT and connect PIN 19 of your Audigy2 OEM and SPDIF_IN of your build-in sound card by a electronic wire. Install both YouP PAX drivers(compulsory) and build-in sound card drivers. Then you get 7.1! And Audigy2 users also can do this to get 7.1.
I posted about modding SBLive4.1 to be SBLive5.1 before. You could check these posted to get some more information.

But, Audigy2 ZS(7.1) users cannot get 8.1 through this kind of modding procedure.

XibaD · Jan 17, 2005, 04:36 PM

classic, you think PaX will mod a driver for SB0410 users???

pepeluis · Jan 17, 2005, 05:27 PM

My mic works!!!!!

Thanks for all!!!

thomasabarnes · Jan 17, 2005, 07:05 PM

Quote:

Originally Posted by pepeluis

My mic works!!!!!

Thanks for all!!!

Well, what did you do to fix the problem? The solution may be helpful to others.

pepeluis · Jan 18, 2005, 01:40 AM

It was my stupidiy! Past week I change the location of my pc and I have connected the mic to the digital ouput!!! Sorry! u_u

Can I install Audigy 2 ZS apps with the Audigy 2 to ZS method? (using ctcomp y pcmod.dll?) with this awesome PAX 1.2 drivers?

RCOrdorica · Jan 18, 2005, 02:28 AM

Here is an American host (based out of Los Angeles, CA) for everyone who is getting slow download speeds from mydrivers.

http://ordorica.org/index.php?id=31

It is hosted off of my site.

Thanks for the awesome drivers.

classic_leon · Jan 18, 2005, 04:31 AM

Quote:

Originally Posted by XibaD

classic, you think PaX will mod a driver for SB0410 users???

No, sorry. Creative removed some files in this sound card's ID.

guru · Jan 18, 2005, 04:35 AM

Quote:

Originally Posted by RCOrdorica

Here is an American host (based out of Los Angeles, CA) for everyone who is getting slow download speeds from mydrivers.

http://ordorica.org/index.php?id=31

It is hosted off of my site.

Thanks for the awesome drivers.

thanks

.

IRONMAN · Jan 18, 2005, 04:37 AM

so.

i finaly get everything working.

And its working realy good.

So: Bix THANK for the good work. I /and i think not only me/ apreaciate thhe work !!

cu

classic_leon · Jan 18, 2005, 06:21 AM

Quote:
Originally Posted by RCOrdorica
Here is an American host (based out of Los Angeles, CA) for everyone who is getting slow download speeds from mydrivers.

http://ordorica.org/index.php?id=31

It is hosted off of my site.

Thanks for the awesome drivers.

Thank you RCOrdorica! I have posted your link on the first page.

Robert McClelland · Jan 18, 2005, 11:57 AM

Hey Um the bit thingie still stay unknow singal on my sound card from new pax1.2 drivers. I send you my dxdiag when I get home.

XibaD · Jan 18, 2005, 02:39 PM

Classic one more quest. :

How can you tell me about the 64 3D hw voices of the sb live! value enabled with winxp drivers vs the non-64 3D hw voices (I don't know how much they are) with the official creative or the youp modded ones? Can youp fix the next drivers to perform the same as the winxp drivers in matter of 3D hw voices?

I say it, because in 3Dmark with winxp drivers I could pass the 3 sound tests but with other drivers I could not.

(And It seems the SB 24bit has 64hw voices too)

qu3x^ · Jan 18, 2005, 06:41 PM

Hi there.

I only registert because I get so interessted on this thread.
I will ask classic_leon cuz i think he knows what he does. Creative only told me "Just watch in the KnowlegdeBase so on so on..."
My question to classic_leon is:

Are these modded drivers also compatible with HyperThreading or are there any known hints to get this working for me. If u know the squeal and die problem, u see I´ll got owned by Creative. :/ (Audigy 2 Platinum)

My frist system was build on an older Northwood with 2,66 Ghz no HT an my soundcard was detected as [A400] in the AudioHQ.
Now with my newer mashine. P4 3,2 Ghz HT the card gets detected as [DE80] on the AudioHQ. Since i assambled my new PC I get the squeal and die problem.
I also looked for kX Project but they dont support EAX; and I only play with my mashine.

Here are is my Dxdiag if needed:

------------------
System Information
------------------
Time of this report: 1/19/2005, 00:21:07
Machine name: QU3X-GAMED
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2_gdr.040517-1325)
Language: German (Regional Setting: German)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 10/26/04 17:00:58 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs), ~3.2GHz
Memory: 2046MB RAM
Page File: 186MB used, 3246MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0904 32bit Unicode
-------------
Sound Devices
-------------
Description: SB Audigy 2 Audio [DE80]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_10021102&REV_04
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.12.0001.0444 (English)

P.S.: Sorry for the bad english, hope this explanation works.

MasterBash · Jan 18, 2005, 08:22 PM

Well I just reinstalled XP... I installed these drivers and they don't work... I get the question mark thing in device manager. Could it be because I removed all drivers from the WinXP cd?

If so, can anyone please tell me the files that their drivers use... under driver details in device manager? Thanks.

XibaD · Jan 18, 2005, 09:24 PM

For classic_leon

more accurate post of what I said before about voices in sb live (I think it's also this way in SBLive 5.1 too)

Here's the dxdiag extract of the winxp native drivers for my CT4830 sb live value 4.1:

Description: Dispositivo de ondas SB Live!
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0002&SUBSYS_80271102&REV_07
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: emu10k1m.sys
Driver Version: 5.12.0001.3300 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/17/2001 20:19:26, 283904 bytes
Other Files:
Driver Provider: Microsoft
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 5000, 100000
>>>Static/Strm HW Mix Bufs: 64, 60<<<
>>>Static/Strm HW 3D Bufs: 64, 60<<<
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run

Double value on creative drivers modded or not. Why is this value doubled with winxp drivers (a real value, for 3DMark 2003 catches it)? Can you ask YouP if he can fix this value in the next release of the drivers?

Thank you

pAq85 · Jan 19, 2005, 03:50 AM

i also noticed that winxp drivers allows 64 voices, but in my case i can't run 3rd sound test in 3dmark03 because it saids that there is not enough free voice channels (or sth like that).

PS Yesterday i sold my live and i'm going to buy a2zs today

XibaD · Jan 19, 2005, 04:31 AM

But I CAN run that test, what it means?

auky · Jan 19, 2005, 05:51 AM

after uninstalling the pax1.2, i'm getting an unknown device in the device manager. i've tried uninstalling and reinstalling the original driver from my audigy2 cd but to no avail. anyone can help me out? what's the unknown device?? it pops up everytime i restart my computer. it's fix after installing pax1.2.

the reason i uninstall pax1.2 is that i get hard lockup while loading windows in the welcome screen after restarting my pc. pls help!!!!

classic_leon · Jan 19, 2005, 06:02 AM

AudigyX NEW YEAR PACKAGE

some pictures about new software working on Audigy(multi-language supported):

classic_leon · Jan 19, 2005, 06:05 AM

AudigyX NEW YEAR PACKAGE
On Audigy2 Platinum/Audigy2 ZS Platinum/Audigy2 ZS Platinum Pro: (multi-language supported)

classic_leon · Jan 19, 2005, 06:16 AM

LIVE 2005 NEW YEAR PACKAGE
On SBLive!: (multi-language supported)

classic_leon · Jan 19, 2005, 06:18 AM

Jof · Jan 19, 2005, 07:53 AM

Do the new live! drivers come out with the software package, or earlier?

Jan 17, 2005, 09:14 AM	#211
pepeluis DriverHeaven Newbie Join Date: Jun 2004 Posts: 14 Rep Power: 0	I use windows mixer and doesn't work. My mic only works with official Auidigy 2 oem drivers. The modded drivers disables microphone and I have to enable the internal sound card only for mic and work with both. Last edited by pepeluis; Jan 17, 2005 at 11:19 AM.

Jan 17, 2005, 09:46 AM	#212
thomasabarnes DriverHeaven Maniac Join Date: Jan 2003 Location: USA Posts: 1,315 Rep Power: 44 System Specs	First, if you are using onboard sound, disable it in BIOS and uninstall the onboard sound driver. If you followed the instructions I wrote in my previous post and your mic still doesnt work, all I can say is make sure you completely uninstalled all the soundcard software and drivers, and use Driver Cleaner in safe mode. Also use Cab Cleaner: http://driverheaven.net/showthread.php?t=56277 Then, reinstall the Creative_PAX-NewYearv1.2 release. If your mic doesnt work after this, I dont know what's wrong. __________________ May a song always touch you in a positive way. Sonar 8 Producer Edition, Vista Ultimate 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

Jan 17, 2005, 11:29 AM	#215
thomasabarnes DriverHeaven Maniac Join Date: Jan 2003 Location: USA Posts: 1,315 Rep Power: 44 System Specs	I have an Audigy, and I'm using v1.2. Recheck that you properly uninstalled the previous driver. __________________ May a song always touch you in a positive way. Sonar 8 Producer Edition, Vista Ultimate 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

Jan 17, 2005, 12:01 PM	#216
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	pepeluis, I think the problem is that a part of Audigy2 OEM's circuit and ID files are removed by Creative. Hence, OEM's DAT file cannot 100% match for Audigy2 ZS's if your card has been modded to be Audigy2 ZS. __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR]

Jan 17, 2005, 01:10 PM	#218
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	You can't directly get it to 7.1,'cos Audigy2 ZS has one more DAC than Audigy2 OEM. But you can get 7.1 through adding one more DAC, if you have a build-in sound card on your mobo with SDPIF_IN. Check Audigy2_EXT and connect PIN 19 of your Audigy2 OEM and SPDIF_IN of your build-in sound card by a electronic wire. Install both YouP PAX drivers(compulsory) and build-in sound card drivers. Then you get 7.1! And Audigy2 users also can do this to get 7.1. I posted about modding SBLive4.1 to be SBLive5.1 before. You could check these posted to get some more information. But, Audigy2 ZS(7.1) users cannot get 8.1 through this kind of modding procedure. __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR]

Jan 17, 2005, 10:19 AM	#213
vick04 DriverHeaven Newbie Join Date: Jan 2005 Posts: 2 Rep Power: 0	what happened to support for audigy in 1.2? :\ i tryed to install it and it said the device is not reconized

Jan 17, 2005, 11:28 AM	#214
pepeluis DriverHeaven Newbie Join Date: Jun 2004 Posts: 14 Rep Power: 0	thomasabarnes I try it but doesn't work. Only mic with normal drivers

Jan 17, 2005, 12:44 PM	#217
thiruvil DriverHeaven Newbie Join Date: Jan 2003 Posts: 2 Rep Power: 0	Is it possible to get 7.1 sound out of an Audigy 2 oem with these drivers. I selected 7.1 but I can't get side right to output so I assume this is a hardware issue?

Jan 17, 2005, 04:36 PM	#219
XibaD DriverHeaven Junior Member Join Date: Dec 2004 Posts: 67 Rep Power: 0	classic, you think PaX will mod a driver for SB0410 users??? __________________ AMD Athlon XP 2400+ => 2280 (217x10.5,1.8v) // Gigabyte3D Cooler Pro Abit NF7 2.0 // 2 x 512 DDR 400 => 434 Seagate 80GB & Seagate 40GB // Club3D 6600GT AGP // Sound Blaster Audigy 2 => Audigy 2 ZS

Jan 17, 2005, 05:27 PM	#220
pepeluis DriverHeaven Newbie Join Date: Jun 2004 Posts: 14 Rep Power: 0	My mic works!!!!! Thanks for all!!! Last edited by pepeluis; Jan 17, 2005 at 06:04 PM.

Jan 18, 2005, 01:40 AM	#222
pepeluis DriverHeaven Newbie Join Date: Jun 2004 Posts: 14 Rep Power: 0	It was my stupidiy! Past week I change the location of my pc and I have connected the mic to the digital ouput!!! Sorry! u_u Can I install Audigy 2 ZS apps with the Audigy 2 to ZS method? (using ctcomp y pcmod.dll?) with this awesome PAX 1.2 drivers?

Jan 18, 2005, 02:28 AM	#223
RCOrdorica Windows Hacker Join Date: Nov 2002 Location: UCSD Posts: 56 Rep Power: 0	Here is an American host (based out of Los Angeles, CA) for everyone who is getting slow download speeds from mydrivers. http://ordorica.org/index.php?id=31 It is hosted off of my site. Thanks for the awesome drivers.

Jan 18, 2005, 04:37 AM	#226
IRONMAN DriverHeaven Newbie Join Date: Jan 2005 Location: Europe - Germany - Erlangen Posts: 14 Rep Power: 0	so. i finaly get everything working. And its working realy good. So: Bix THANK for the good work. I /and i think not only me/ apreaciate thhe work !! cu

Jan 18, 2005, 06:21 AM	#227
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	Quote: Originally Posted by RCOrdorica Here is an American host (based out of Los Angeles, CA) for everyone who is getting slow download speeds from mydrivers. http://ordorica.org/index.php?id=31 It is hosted off of my site. Thanks for the awesome drivers. Thank you RCOrdorica! I have posted your link on the first page. __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR]

Jan 18, 2005, 11:57 AM	#228
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Some Where in Ohio Posts: 6,346 Rep Power: 103 System Specs	Hey Um the bit thingie still stay unknow singal on my sound card from new pax1.2 drivers. I send you my dxdiag when I get home. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun"

Jan 18, 2005, 02:39 PM	#229
XibaD DriverHeaven Junior Member Join Date: Dec 2004 Posts: 67 Rep Power: 0	Classic one more quest. : How can you tell me about the 64 3D hw voices of the sb live! value enabled with winxp drivers vs the non-64 3D hw voices (I don't know how much they are) with the official creative or the youp modded ones? Can youp fix the next drivers to perform the same as the winxp drivers in matter of 3D hw voices? I say it, because in 3Dmark with winxp drivers I could pass the 3 sound tests but with other drivers I could not. (And It seems the SB 24bit has 64hw voices too) __________________ AMD Athlon XP 2400+ => 2280 (217x10.5,1.8v) // Gigabyte3D Cooler Pro Abit NF7 2.0 // 2 x 512 DDR 400 => 434 Seagate 80GB & Seagate 40GB // Club3D 6600GT AGP // Sound Blaster Audigy 2 => Audigy 2 ZS

Jan 18, 2005, 06:41 PM	#230
qu3x^ DriverHeaven Newbie Join Date: Jan 2005 Posts: 1 Rep Power: 0	Hi there. I only registert because I get so interessted on this thread. I will ask classic_leon cuz i think he knows what he does. Creative only told me "Just watch in the KnowlegdeBase so on so on..." My question to classic_leon is: Are these modded drivers also compatible with HyperThreading or are there any known hints to get this working for me. If u know the squeal and die problem, u see I´ll got owned by Creative. :/ (Audigy 2 Platinum) My frist system was build on an older Northwood with 2,66 Ghz no HT an my soundcard was detected as [A400] in the AudioHQ. Now with my newer mashine. P4 3,2 Ghz HT the card gets detected as [DE80] on the AudioHQ. Since i assambled my new PC I get the squeal and die problem. I also looked for kX Project but they dont support EAX; and I only play with my mashine. Here are is my Dxdiag if needed: ------------------ System Information ------------------ Time of this report: 1/19/2005, 00:21:07 Machine name: QU3X-GAMED Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2_gdr.040517-1325) Language: German (Regional Setting: German) System Manufacturer: To Be Filled By O.E.M. System Model: To Be Filled By O.E.M. BIOS: BIOS Date: 10/26/04 17:00:58 Ver: 08.00.09 Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs), ~3.2GHz Memory: 2046MB RAM Page File: 186MB used, 3246MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.0001.0904 32bit Unicode ------------- Sound Devices ------------- Description: SB Audigy 2 Audio [DE80] Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_10021102&REV_04 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: ctaud2k.sys Driver Version: 5.12.0001.0444 (English) P.S.: Sorry for the bad english, hope this explanation works.

Jan 18, 2005, 08:22 PM	#231
MasterBash DriverHeaven Newbie Join Date: Jan 2005 Posts: 1 Rep Power: 0	Well I just reinstalled XP... I installed these drivers and they don't work... I get the question mark thing in device manager. Could it be because I removed all drivers from the WinXP cd? If so, can anyone please tell me the files that their drivers use... under driver details in device manager? Thanks.

Jan 18, 2005, 09:24 PM	#232
XibaD DriverHeaven Junior Member Join Date: Dec 2004 Posts: 67 Rep Power: 0	For classic_leon more accurate post of what I said before about voices in sb live (I think it's also this way in SBLive 5.1 too) Here's the dxdiag extract of the winxp native drivers for my CT4830 sb live value 4.1: Description: Dispositivo de ondas SB Live! Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_1102&DEV_0002&SUBSYS_80271102&REV_07 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: emu10k1m.sys Driver Version: 5.12.0001.3300 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 8/17/2001 20:19:26, 283904 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Full Cap Flags: 0xF5F Min/Max Sample Rate: 5000, 100000 >>>Static/Strm HW Mix Bufs: 64, 60<<< >>>Static/Strm HW 3D Bufs: 64, 60<<< HW Memory: 0 Voice Management: Yes EAX(tm) 2.0 Listen/Src: Yes, Yes I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Registry: OK Sound Test Result: Not run Double value on creative drivers modded or not. Why is this value doubled with winxp drivers (a real value, for 3DMark 2003 catches it)? Can you ask YouP if he can fix this value in the next release of the drivers? Thank you __________________ AMD Athlon XP 2400+ => 2280 (217x10.5,1.8v) // Gigabyte3D Cooler Pro Abit NF7 2.0 // 2 x 512 DDR 400 => 434 Seagate 80GB & Seagate 40GB // Club3D 6600GT AGP // Sound Blaster Audigy 2 => Audigy 2 ZS

Jan 19, 2005, 03:50 AM	#233
pAq85 DriverHeaven Newbie Join Date: Jun 2004 Posts: 4 Rep Power: 0	i also noticed that winxp drivers allows 64 voices, but in my case i can't run 3rd sound test in 3dmark03 because it saids that there is not enough free voice channels (or sth like that). PS Yesterday i sold my live and i'm going to buy a2zs today __________________ [color=white]PCArena.pl reviewer. [/color]

Jan 19, 2005, 04:31 AM	#234
XibaD DriverHeaven Junior Member Join Date: Dec 2004 Posts: 67 Rep Power: 0	But I CAN run that test, what it means? __________________ AMD Athlon XP 2400+ => 2280 (217x10.5,1.8v) // Gigabyte3D Cooler Pro Abit NF7 2.0 // 2 x 512 DDR 400 => 434 Seagate 80GB & Seagate 40GB // Club3D 6600GT AGP // Sound Blaster Audigy 2 => Audigy 2 ZS

Jan 19, 2005, 05:51 AM	#235
auky DriverHeaven Newbie Join Date: Oct 2003 Posts: 9 Rep Power: 0	after uninstalling the pax1.2, i'm getting an unknown device in the device manager. i've tried uninstalling and reinstalling the original driver from my audigy2 cd but to no avail. anyone can help me out? what's the unknown device?? it pops up everytime i restart my computer. it's fix after installing pax1.2. the reason i uninstall pax1.2 is that i get hard lockup while loading windows in the welcome screen after restarting my pc. pls help!!!! Last edited by auky; Jan 19, 2005 at 07:11 AM.

Jan 19, 2005, 06:02 AM	#236
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	AudigyX NEW YEAR PACKAGE some pictures about new software working on Audigy(multi-language supported): __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR] Last edited by classic_leon; Jan 19, 2005 at 06:27 AM.

Jan 19, 2005, 06:05 AM	#237
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	AudigyX NEW YEAR PACKAGE On Audigy2 Platinum/Audigy2 ZS Platinum/Audigy2 ZS Platinum Pro: (multi-language supported) __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR] Last edited by classic_leon; Jan 19, 2005 at 06:23 AM.

Jan 19, 2005, 06:16 AM	#238
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	LIVE 2005 NEW YEAR PACKAGE On SBLive!: (multi-language supported) __________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR]

Jan 19, 2005, 06:18 AM	#239
classic_leon DriverHeaven Senior Member Join Date: Aug 2004 Location: Wu Han, Hu Bei, P.R.China Posts: 1,236 Rep Power: 0	__________________ Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR]

Jan 19, 2005, 07:53 AM	#240
Jof DriverHeaven Junior Member Join Date: Jan 2005 Posts: 22 Rep Power: 0	Do the new live! drivers come out with the software package, or earlier?

LinkBacks (?) LinkBack to this Thread: http://www.driverheaven.net/audio-general-technical-discussion/63660-install-audigy4-drivers-your-sb-live-audigy-audigy-2-audigy2-zs.html
Posted By	For	Type	Date
Planet 3DNow! Forum - Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS	This thread	Refback	Sep 21, 2009 03:11 PM
Audigy 2 ZS worth upgrading? - Head-Fi: Covering Headphones, Earphones and Portable Audio	This thread	Pingback	Sep 8, 2009 04:25 PM
audigy2: audioHQ einstellungen nach neustart weg? - Planet 3DNow! Forum	This thread	Refback	Jul 26, 2009 04:25 PM
download creative sb0410 \| VIRGILIO Ricerca \| Web	This thread	Refback	Jun 22, 2009 10:10 AM
How to get decent sound out of a creative audigy 2 ZS? - Head-Fi: Covering Headphones, Earphones and Portable Audio	This thread	Refback	Jun 14, 2009 09:24 PM
Audigy 4 modded stuff for Audigy 2/Audigy/Live! - Overclockers NZ Forums	This thread	Refback	Jun 9, 2009 11:25 AM
creative sblive sb0410 drivers download - Computer Driver Download Center swicki - powered by eurekster	This thread	Refback	Apr 15, 2009 01:42 PM
Audigy @ Audigy 2 ZS - lookbeyond.de	This thread	Refback	Apr 11, 2009 05:32 PM
creative sblive sb0410 drivers download - Computer Driver Download Center swicki - powered by eurekster	This thread	Refback	Mar 24, 2009 01:06 PM
Audigy 2 (ZS) @ Audigy 4 Treiber - Forum de Luxx	This thread	Refback	Feb 27, 2009 10:17 AM
creative sblive sb0410 drivers download - Computer Driver Download Center swicki - powered by eurekster	This thread	Refback	Feb 10, 2009 06:46 AM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Seite 2 - Planet 3DNow! Forum	This thread	Refback	Jan 20, 2009 05:31 AM
re: Help!! Need Audigy 2 drivers! - Page 2 - Neoseeker Forums	This thread	Refback	Dec 28, 2008 06:11 AM
CREATIVE FULL DRIVER CT4830	This thread	Refback	Nov 23, 2008 12:47 PM
SoftMod (Driver Modificati) Schede Creative - Pagina 16 - Hardware Upgrade Forum	This thread	Refback	Oct 13, 2008 05:14 PM
Moteur de recherche lo.st : Infos, Photos, Videos	This thread	Refback	Aug 14, 2008 09:05 PM
Sound Blaster Audigy 4 & Software - ForumBase	This thread	Refback	Aug 8, 2008 03:18 PM
SoftMod (Driver Modificati) Schede Creative - Pagina 32 - Hardware Upgrade Forum	This thread	Refback	Jul 27, 2008 07:00 PM
sb audigy 2 zs audio * Creative USB Sound Blaster Audigy 2 ZS Video Editor % JILNUL.INFO	This thread	Refback	Jun 26, 2008 10:46 AM
Probleme mit Audigy 4 + Teufel Concept E - Multimedia - Kaltmacher Netzwerk	This thread	Refback	Jun 13, 2008 08:50 PM
Teufel : Concept E Magnum oder G ?? - Seite 5 - Forum - CHIP Online	This thread	Refback	Jun 3, 2008 02:03 PM
Drivers Audigy4 se sblive!/audigy/audigy2/zs - Insomnia.gr	This thread	Refback	Apr 21, 2008 12:58 AM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Planet 3DNow! Forum	This thread	Refback	Mar 27, 2008 03:05 PM
because of kX audio drivers... - Guru3D.com Forums	This thread	Refback	Mar 19, 2008 12:02 PM
Audigy 2 (ZS) @ Audigy 4 Treiber - Forum de Luxx	This thread	Refback	Mar 16, 2008 04:50 PM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Planet 3DNow! Forum	Post #0	Refback	Mar 15, 2008 09:02 AM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Planet 3DNow! Forum	This thread	Refback	Mar 11, 2008 12:23 AM
mutar desde live 5.1 a Audigy2 zs - Pgina 7 - Comunidad N3D	This thread	Refback	Mar 9, 2008 04:11 PM
Best drivers for Audigy 2 ZS?? - Rage3D Discussion Area	This thread	Refback	Mar 6, 2008 12:39 PM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Seite 25 - Planet 3DNow! Forum	This thread	Refback	Mar 4, 2008 02:46 PM
EMU 0404 virtual surround in games? - Page 2 - Head-Fi: Covering Headphones, Earphones and Portable Audio	This thread	Refback	Mar 3, 2008 11:05 AM
SoftMod (Driver Modificati) Schede Creative - Pagina 30 - Hardware Upgrade Forum	This thread	Refback	Mar 3, 2008 09:44 AM
Planet 3DNow! Forum - Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS	This thread	Refback	Mar 2, 2008 04:31 PM
Reply to a thread - Neoseeker Forums	This thread	Refback	Mar 1, 2008 12:06 PM
Drivers! Get Your Drivers! - Neoseeker Forums	This thread	Refback	Feb 29, 2008 11:37 AM
Pax 1.2 - Modifizierte Audigy 4 Treiber für Audigy 1 + 2 + ZS - Seite 2 - Planet 3DNow! Forum	This thread	Refback	Feb 28, 2008 01:03 PM