|
|||||||
 |
|
|
LinkBack (148) | Thread Tools |
Nov 16, 2004, 09:45 PM
|
#451 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 3
Rep Power: 0  |
well atleast one of the issues is resolved. My system wont reboot after tinkering with eax console and eax control panel at the sametime anymore but still no 3dsound in most games and only eax 3.0 in call of duty, is anyone else having the same issues with an audigy 1? I might have to revert back to original drivers to enable rear speakers in games
 .
|
|
|
|
Nov 16, 2004, 10:29 PM
|
#452 |
|
DriverHeaven Newbie
Join Date: Jul 2003
Posts: 3
Rep Power: 0 |
where to get EAX Games Effects¿
hey guys, i habe an audigy 1 and after the update looks like everything works ok.
i never used de eax effects..... i want to test it but cant figure where to select it..... i looked into the EAX Console but cant found it.... can someone tellme how i need to do it, thanks? |
|
|
|
|
Nov 16, 2004, 11:01 PM
|
#453 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 10
Rep Power: 0 |
i definitely patched audio/setup and stillnothing...i tried doing it manully too...the thing idont understand though is that after patching the dat file that gets patched only has like 3 entries in it for IDs... which to me seems like it didnt do ANYTHING good.
|
|
|
|
|
Nov 16, 2004, 11:18 PM
|
#454 |
|
Avril Fan
Join Date: Jun 2003
Location: somewhere in colombia, okok, bogotá city :p
Posts: 1,267
Rep Power: 0 |
so u extracted it and changed it and then u updated the data1.cab file with the new ctcomp.dat right¿?
and nothing happened? what card do u have again?
__________________
Oblivion ftw |
|
|
|
|
Nov 16, 2004, 11:26 PM
|
#455 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 10
Rep Power: 0 |
yes i applied the patch and i put it back into the cab (i re-extracted to make sure)...
I have an Audigy 2... its usually labeled as the "Value"...its an OEM card with model number SB0400 |
|
|
|
|
Nov 17, 2004, 09:54 PM
|
#456 |
|
DriverHeaven Newbie
Join Date: May 2003
Posts: 3
Rep Power: 0 |
I remember that starting from a certain audigy driver (perhaps the first with eax4? so the 4xx series?), on my sblive value, when I set an eq setting, it will go silent until I select the parametric equalizer and set it to normal, even though it's already on normal. After that, it would work, but it's really annoying. So I'm wondering if there's a way around this or what the last good version was? I'm thinking 383 maybe?
Thanks |
|
|
|
|
Nov 18, 2004, 07:23 PM
|
#457 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 10
Rep Power: 0 |
i finally for some audigy value drivers...not that that helps me sincei still can't install all the cool mixer stuff
any word on what ID my card has? Cause if i had that i might actually be able to intall thisSoundBlaster Audigy 2 Value - SB0400 |
|
|
|
|
Nov 18, 2004, 07:28 PM
|
#458 | |
|
Apple Fanboy?
|
your audigy 2 value is not a true audigy card (no 10k2) chip
i doubt the ZS software will work for you
__________________
Chris - The Aussie Super Mod
Driverheaven Rules - Sig Request Thread How you can help DriverHeaven by using Digg! Driverheaven Super-Moderator Quote:
|
|
|
|
|
Nov 18, 2004, 10:03 PM
|
#459 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 10
Rep Power: 0 |
apparently not...i've tried everything... i have drivers, but they are choppy in every game... i know this is a common problem... what was the solution?
|
|
|
|
|
Nov 18, 2004, 10:42 PM
|
#460 |
|
PAX Tweaker, PAX Expert.
|
I know my audigy 2 6.1 card is
 I'd just used PAX drivers mind said official Audigy 2 ZS now in my dxdiag box   
__________________
"XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" |
|
|
|
|
Nov 20, 2004, 02:18 PM
|
#461 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
help with neo6
i have everything working except the neo6 update, seems that everytime i try to put the dts neo6 update in than the eq dosent work. can you explain to me what im doing wrong. i have a audigy 2 platinum card.
|
|
|
|
|
Nov 21, 2004, 09:44 PM
|
#462 |
|
PAX Tweaker, PAX Expert.
|
You might need PFMod hack to installed it.
__________________
"XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" |
|
|
|
|
Nov 22, 2004, 06:16 PM
|
#463 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 10
Rep Power: 0 |
I FINALLY got the darn thing to install over my Audigy 2 Value... all i needed was the right hardware id...for those of you wondering...
SB Audigy 2 Value - SB0400 - ID : 08100001 However...i'm still having problems. I can't get the EAX console or the Equalizer up..and my "YourCPL" says "error yourcpl" in the control panel. The YourCPL still RUNS, its just displays wrong, but the regular Creative equalizer stuff won't start because it says it can't find the hardware to support it. I followed the instructions...so what am i missing?  Cheers! |
|
|
|
|
Nov 22, 2004, 10:52 PM
|
#464 |
|
DriverHeaven Senior Member
Join Date: Aug 2004
Location: Wu Han, Hu Bei, P.R.China
Posts: 1,236
Rep Power: 0 |
I think you'd better install Audigy2 value software. Audigy2 ZS software is not able to fully work with this value card.
__________________
Fashion keeps us alive. Being racist is most stupid thing in the world. I am not a toy of political games that get played by politician. [COLOR=yellow][COLOR=red]YouP-PAX[/COLOR] [COLOR=blue]Please visit[/COLOR] www.YouP-PAX.org [COLOR=blue]to discuss the computer mods. The latest YouP PAX modded drivers are provided on the site.[/COLOR][/COLOR] |
|
|
|
|
Nov 24, 2004, 12:27 AM
|
#465 |
|
DriverHeaven Junior Member
Join Date: May 2004
Posts: 20
Rep Power: 0 |
Hey I really wanna try this out with my regular Audigy 2, but the first 4 download links are down and the iso download keeps stopping at like 94-99 percent. I have the disc that came with my regular Audigy 2. You think that would work or do I have to keep searching for links?
|
|
|
|
|
Nov 24, 2004, 06:30 AM
|
#466 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
Nice guide, but can I use Audigy 2 ZS Platinum Pro drivers in to my Audigy 2 Platinum EX card. Actualy they are almost same, the difference is that ZS is 7.1 and my Platinum EX is 6.1. I dont care much for the software advantages, but I have 7.1 speakers.
10x |
|
|
|
|
Nov 24, 2004, 06:48 AM
|
#467 | |
|
Apple Fanboy?
|
the hardware only supports 6.1, so unless you use a second card connected via s/pdif correctly, then you will still only have 6.1 sound
__________________
Chris - The Aussie Super Mod
Driverheaven Rules - Sig Request Thread How you can help DriverHeaven by using Digg! Driverheaven Super-Moderator Quote:
|
|
|
|
|
|
Nov 24, 2004, 07:09 AM
|
#468 | |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
Quote:
I also have an external AV reciever which i s 7.1 if I connect it trough s/pdif into the External drive of the card, what sound will I recieve? Some kind of virtual 7.1? Or 6.1 What will happend if I use ZS Platinum Pro drivers? |
|
|
|
|
|
Nov 24, 2004, 02:10 PM
|
#469 | |
|
Apple Fanboy?
|
i'm talking about a second sound card in the computer connected via s/pdif (which is sterep only) to receive the missing one channel
__________________
Chris - The Aussie Super Mod
Driverheaven Rules - Sig Request Thread How you can help DriverHeaven by using Digg! Driverheaven Super-Moderator Quote:
|
|
|
|
|
|
Nov 24, 2004, 06:43 PM
|
#470 |
|
DriverHeaven Newbie
Join Date: Jun 2003
Posts: 11
Rep Power: 0 |
Works great. Installed ZS driver on my old Audigy.
__________________
Asus P4C800-E DeLuxe v2.0 - BIOS 1020 beta 1 P4 3000E @ 3675 - ZALMAN CNPS 7000B-Cu 1GB OCZ EL DDR PC-4000 Dual Channel Gold Crucial RADEON™ 9800 Pro 128MB Creative Audigy Platinum Hitachi DeskStar 7K250 160GB 2x Seagate Barracuda IV 80GB SigmaDesigns H+ Q-Tech. Ultra Quiet 300W PSU AOpen HQ45 case with modded exhaust |
|
|
|
|
Nov 25, 2004, 02:48 AM
|
#471 | |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
Quote:
|
|
|
|
|
|
Nov 25, 2004, 03:35 AM
|
#472 | |
|
Apple Fanboy?
|
you'll need a CD_SPDIF cable (often comes with SB cards)
aswell as the pinouts for the ZS's AD_EXT and the pinout for the motherboards onboard S/PDIF header (you need one that has an S/PDIF input pin) check the m/b manual to see if you have one and post back please
__________________
Chris - The Aussie Super Mod
Driverheaven Rules - Sig Request Thread How you can help DriverHeaven by using Digg! Driverheaven Super-Moderator Quote:
|
|
|
|
|
|
Nov 25, 2004, 04:50 AM
|
#473 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
10x again for hellping
My motherboard is Asus P4C800 Deluxe. There is integratet SPDIF port, but there is also SPDIF Out pins(for additional SPDIF Module). You can see the manual if I`m wrong- http://www.asus.com.tw/support/downl...00.pdf~zaqwedc The pins are - 1 - +5V 2 - empty 3 - SPDIFOUT 4 - GND Actually , I`m with Platinum EX so I dont have AUD_EXT. But I have 2 SPDIF in/outs - 1 optical and 1 normal. |
|
|
|
|
Nov 25, 2004, 04:57 AM
|
#474 | |
|
Apple Fanboy?
|
hmm no input so that doesn't help
my gigabyte board has an input on the motherboard…
__________________
Chris - The Aussie Super Mod
Driverheaven Rules - Sig Request Thread How you can help DriverHeaven by using Digg! Driverheaven Super-Moderator Quote:
|
|
|
|
|
|
Nov 25, 2004, 05:21 AM
|
#475 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 5
Rep Power: 0 |
So, there is no way.... unfortunatly , futured upgrade is no acceptable at this moment due to finatial problems
. 10x again anyway
|
|
|
|
|
Nov 26, 2004, 09:05 AM
|
#476 |
|
DriverHeaven Junior Member
Join Date: Nov 2004
Posts: 28
Rep Power: 31 |
Does the latest Creative Compatibility patch (ver 7.3.0.0) work with the latest Audigy 2 ZS driver addition:
Digital Rights Management 1.84.0055 for Sound Blaster Audigy 2 and Audigy 2 ZS series audio devices (25 Nov 2004) They say it combines all 3 previous Audigy 2 ZS Driver Updates.. ?? |
|
|
|
|
Nov 26, 2004, 10:43 AM
|
#477 |
|
DriverHeaven Junior Member
Join Date: Nov 2004
Posts: 28
Rep Power: 31 |
the Audigy2 ZS iso link is ridiculous, its goin at 3.2kbps!!
Cant anybody host this through some sort of p2p network? (Emule or Bittorrent).. Coz I really think somebody should torrent this, makes it easier for everybody wanting to download it |
|
|
|
|
Nov 26, 2004, 05:16 PM
|
#478 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Posts: 2
Rep Power: 0 |
The main sad point is that All Audigy 2 drivers do NOT allow to use Advanced EQ presets normally. When you click on them in SurMix you don't hear anything. Finally, you can hear, for instance Drum'n'Bass, but only when you move slider up or down. Even when you SAVE the settings, you hear (No Effects) instead Drum'n'Bass...
Does anybody have any solution/patch. I use 444 drivers from A2 on my SB0220. Drivers are OK. But Muxer sucks with them ((
|
|
|
|
|
Nov 26, 2004, 07:28 PM
|
#479 |
|
DriverHeaven Newbie
Join Date: Nov 2004
Location: Germany
Posts: 12
Rep Power: 0 |
More sources for the ISO
Hello.
I read this thread since I got a used Audigy for two weeks and am going to mod it as soon as I have the ISO on disk. I seeked mydrivers.com and they have several mirrors. file2.mydrivers.com/sound/A2zsDrvDisk.ISO file.mydrivers.com/sound/A2zsDrvDisk.ISO http://file3.mydrivers.com/files/sound/A2zsDrvDisc.ISO http://file4.mydrivers.com/files/sound/A2zsDrvDisc.ISO I tried out all links, they don't differ in speed, really. Greets, Aleterocker Last edited by Aleterocker; Dec 2, 2004 at 08:50 PM. |
|
|
|
|
Nov 29, 2004, 09:35 AM
|
#480 |
|
DriverHeaven Newbie
Join Date: Jun 2004
Posts: 15
Rep Power: 0 |
I was wondering if anyone has their onboard audio (AC97?) working in explicitive cohesion with an SBLive! or Audigy? I have an A7V8x-x with 'soundmax cadenza' onboard and a 5.1 sb in slot 3. I managed to get this
dirty mofo and have both the sbliveFF00 and smax devices showing up.The sb is finally working as I hoped it would when I bought the !! thing last century. WOOT! Can I continue to somehow use my cases front mic+phone jack (routed in/out onboard audio)? I looked at the pin-out images pinned in this forum but don't recognize the match to my case connectors (left,right,gnd,mic,ect) on that image, its all spdif things. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
|
|
Network:
