X-Fi card is killing me..

Shawno667 · Aug 16, 2008, 08:55 PM

Card- SB604? X-Fi Fatality Pro, it has the fatty heatsink and red led.
i bought it on ebay from canada, only a couple provinces away..
anywho, it said guaranteed against doa, comes with just the card..

Im now trying to install it, second PCI slot in my DFI UltraD board..
im only running an 8600GTS aswell.
I have tried the latest drivers from creative... thus started in saying "my device is not seen by software" , so i took it out, and reseated and then tried, it got going and updating windows drivers, i click Continue Anyway when the popup warning comes up..Now the problems, my computer ether locks up now during the ending of this.. or next restart on the windows boot screen the blue bars keep going and going or stop...after a few trys, i get past
and i check my device manager..
Creative X-Fi Audio processor (WDM) is up there with a yellow circle.
the status says "This device cannot start. (Code 10)"
????! I have tried now, YouP-Pax 6.0 WDM driver installs, Guru3D Driver Cleaner each time!, i am now about to try out YouP-PAX-Fiv3.63.03
and see to folllow this...
(Solution to Mod XFI Xtreme music OEM -> Retails . Successful with me)

Well let you know, if it goes or not... please looking for help!!
thanks
Shawn

Shawno667 · Aug 16, 2008, 09:46 PM

well, PAXFI3.6 or whats it called... i did cab and driver clean in safemode, rebooted and started/installed PAX, near updating the files i got a blue screen bsod.. something about ht2kok file?? i restarted, and tried with the WDM setup.exe file..and got another blue screen of death... gar, im going to try 1 last time with PAX6.0 and do it all in safemode..
1 last time..

cozumel · Aug 17, 2008, 06:18 AM

Hi & welcome to DH.

Sorry that no-one was able to get back to you yet.

How did the new drivers go?

RIV@NVX · Aug 17, 2008, 06:28 AM

Are you sure that the card is working? I had similiar issues recently when dealing with a broken Audigy.

BiGBrOwNPimpsta · Aug 20, 2008, 05:08 PM

Quote:

Originally Posted by Shawno667

Card- SB604? X-Fi Fatality Pro, it has the fatty heatsink and red led.
i bought it on ebay from canada, only a couple provinces away..
anywho, it said guaranteed against doa, comes with just the card..

Im now trying to install it, second PCI slot in my DFI UltraD board..
im only running an 8600GTS aswell.
I have tried the latest drivers from creative... thus started in saying "my device is not seen by software" , so i took it out, and reseated and then tried, it got going and updating windows drivers, i click Continue Anyway when the popup warning comes up..Now the problems, my computer ether locks up now during the ending of this.. or next restart on the windows boot screen the blue bars keep going and going or stop...after a few trys, i get past
and i check my device manager..
Creative X-Fi Audio processor (WDM) is up there with a yellow circle.
the status says "This device cannot start. (Code 10)"
????! I have tried now, YouP-Pax 6.0 WDM driver installs, Guru3D Driver Cleaner each time!, i am now about to try out YouP-PAX-Fiv3.63.03
and see to folllow this...
(Solution to Mod XFI Xtreme music OEM -> Retails . Successful with me)

Well let you know, if it goes or not... please looking for help!!
thanks
Shawn

which drivers from creative did you try?

poshkid · Aug 22, 2008, 05:17 AM

I had a same issue with an extreme music x-fi card. (BSOD if drivers install or drivers didn't install at all). It's a hardware issue..!

Please send back the card at your earliest !

Aug 16, 2008, 08:55 PM	#1
Shawno667 DriverHeaven Newbie Join Date: Aug 2008 Posts: 2 Rep Power: 0	X-Fi card is killing me.. Card- SB604? X-Fi Fatality Pro, it has the fatty heatsink and red led. i bought it on ebay from canada, only a couple provinces away.. anywho, it said guaranteed against doa, comes with just the card.. Im now trying to install it, second PCI slot in my DFI UltraD board.. im only running an 8600GTS aswell. I have tried the latest drivers from creative... thus started in saying "my device is not seen by software" , so i took it out, and reseated and then tried, it got going and updating windows drivers, i click Continue Anyway when the popup warning comes up..Now the problems, my computer ether locks up now during the ending of this.. or next restart on the windows boot screen the blue bars keep going and going or stop...after a few trys, i get past and i check my device manager.. Creative X-Fi Audio processor (WDM) is up there with a yellow circle. the status says "This device cannot start. (Code 10)" ????! I have tried now, YouP-Pax 6.0 WDM driver installs, Guru3D Driver Cleaner each time!, i am now about to try out YouP-PAX-Fiv3.63.03 and see to folllow this... (Solution to Mod XFI Xtreme music OEM -> Retails . Successful with me) Well let you know, if it goes or not... please looking for help!! thanks Shawn

Aug 17, 2008, 06:18 AM	#3
cozumel I'm dangerous but cute... Join Date: Apr 2006 Location: Under the waves... Posts: 3,619 Rep Power: 42 System Specs	Hi & welcome to DH. Sorry that no-one was able to get back to you yet. How did the new drivers go? __________________ Don't worry about money - Be a beach bum! Scuba Rocks

Aug 17, 2008, 06:28 AM	#4
RIV@NVX Freedom is a feature. Join Date: Jul 2002 Location: Croatia, Rijeka Posts: 4,480 Rep Power: 53 System Specs	Are you sure that the card is working? I had similiar issues recently when dealing with a broken Audigy. __________________ -- Vedran

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Killing palmtrees	Duranix	Heavenly Visions	12	Aug 1, 2006 12:11 AM
Temps are killing me!!	RTilbury	Hardware Discussion & Support	9	Sep 3, 2005 02:20 PM
have u ever thougth on killing one?	Shadow Lady	Off-Topic Forum	19	Nov 24, 2004 12:19 PM
This A7V333 is killing me....	gonx_me	Motherboards, Networking and Misc Forum	6	Dec 11, 2002 12:39 AM
8500DV is killing me !!!	microman	Windows XP/2K Radeon Display Drivers	12	Jun 26, 2002 12:03 AM

Aug 16, 2008, 09:46 PM	#2
Shawno667 DriverHeaven Newbie Join Date: Aug 2008 Posts: 2 Rep Power: 0	well, PAXFI3.6 or whats it called... i did cab and driver clean in safemode, rebooted and started/installed PAX, near updating the files i got a blue screen bsod.. something about ht2kok file?? i restarted, and tried with the WDM setup.exe file..and got another blue screen of death... gar, im going to try 1 last time with PAX6.0 and do it all in safemode.. 1 last time..

Aug 22, 2008, 05:17 AM	#6
poshkid DriverHeaven Newbie Join Date: Aug 2008 Posts: 14 Rep Power: 0	I had a same issue with an extreme music x-fi card. (BSOD if drivers install or drivers didn't install at all). It's a hardware issue..! Please send back the card at your earliest !