Vista and XP Driver Support for Audigy, Xtreme Audio, and Xfi cards - Page 18

Robert McClelland · Feb 13, 2008, 12:37 PM

Quote:

Originally Posted by Kalimdor

Greetings,

Need to clarify something. My apologies for my outmost noobness in this area.

Im using an Audigy 1 Platinum EX card. Will these drivers work for the card?

If so, it will be soft-modded into X-Fi?

If these drivers are not compatible or have certain hardware issues, what the next best softmod i could use for my card?

Thank you for your time and patience, hope to hear from ya'll soon.

Ya it should if not please try it you never know.

Robert McClelland · Feb 13, 2008, 12:38 PM

Quote:

Originally Posted by maggreg

I sucsesfully enabled the DTS/Dolby Decoder in WXP & W2k3 on my card (Fatality Platinum) with replace and hex editing compatebility string of .dat files (%windir%\system32\data)
original file for my card is ctp046Aw.dat and is replaced with ctp0465w.dat
the compadebility string is in hex offsets 480h (32h-3Eh) and 4B8 (FCCCFEC9F8C9F9CBCBFEFE00h-FCCCFEBD8CBD8DBFBFFEFE00)

this is the link of moded and orginal files from two diferent driver sets:
Moded&Original

maggreg I really need added to my messeger. I think you become my part my team if you want I don't know hex numbers ect.. I need someone thats good at it

. thanks.
Thanks I take look at them

ever bit helps.
Did mic issue fix work?

avp · Feb 13, 2008, 02:37 PM

Robert I want to thank you for all you hard work.
I have Audigy 2ZS. I have a slight problem with the drivers above v3.63.03d when changing master volume in Creative Mixer all sliders move but only only left and right channels output sound. If I use Windows Mixer than all 5.1 levels change. Maybe you can look into this.
Also any more help with the Equalizer and out of memory message?

Kalimdor · Feb 13, 2008, 03:00 PM

Greetings,

Ive tried the 04 release and the installation was ok.

I got a fuzzing sound from my center speaker and later found out it was because of the digital out option being checked.

Do i have any options using the Creative Audio HQ to test the speakers or any sort of program recommended? I find the Surround Mixer and other stuff useful esp being able to customize the enviroment type.

What are ur suggestions pls.

Im using the Audigy 1 Platinum EX.

Thank you in advance.

Robert McClelland · Feb 13, 2008, 03:47 PM

Quote:

Originally Posted by avp

Robert I want to thank you for all you hard work.
I have Audigy 2ZS. I have a slight problem with the drivers above v3.63.03d when changing master volume in Creative Mixer all sliders move but only only left and right channels output sound. If I use Windows Mixer than all 5.1 levels change. Maybe you can look into this.
Also any more help with the Equalizer and out of memory message?

For that you might have replace the old pfmod.dll to make it work

found here PfMod.dll - FileFront.com

Robert McClelland · Feb 13, 2008, 03:48 PM

Quote:

Originally Posted by Kalimdor

Greetings,

Ive tried the 04 release and the installation was ok.

I got a fuzzing sound from my center speaker and later found out it was because of the digital out option being checked.

Do i have any options using the Creative Audio HQ to test the speakers or any sort of program recommended? I find the Surround Mixer and other stuff useful esp being able to customize the enviroment type.

What are ur suggestions pls.

Im using the Audigy 1 Platinum EX.

Thank you in advance.

Try this

SpkCal.zip - FileFront.com

djmaxi · Feb 13, 2008, 07:26 PM

Quote:

Originally Posted by maggreg

I sucsesfully enabled the DTS/Dolby Decoder in WXP & W2k3 on my card (Fatality Platinum) with replace and hex editing compatebility string of .dat files (%windir%\system32\data)
original file for my card is ctp046Aw.dat and is replaced with ctp0465w.dat
the compadebility string is in hex offsets 480h (32h-3Eh) and 4B8 (FCCCFEC9F8C9F9CBCBFEFE00h-FCCCFEBD8CBD8DBFBFFEFE00)

this is the link of moded and orginal files from two diferent driver sets:
Moded&Original

maggreg THANX A MILLION TIMES, DE VERDAD MUCHISMAS GRACIAS and of course I cannot forget about Robert too.

Guys, you make possible to have something ever better than the original in the way it should be.

KEEP IT UP and join forces!!

Many thanks from me and all my friends in Argentina that follows this ansome work

maggreg · Feb 13, 2008, 08:41 PM

@djmaxi thanx

i find 3 more files working with my card:
ctp0460w.dat, ctp0466w.dat, ctp0550w.dat (with 550 decoder working but connectors from front panel is disabled)
ctp0468w.dat, ctp0469w.dat, ctp0464w.dat also working but is identical like ctp0465.dat

Robert McClelland · Feb 13, 2008, 10:45 PM

Quote:

Originally Posted by maggreg

@djmaxi thanx

i find 3 more files working with my card:
ctp0460w.dat, ctp0466w.dat, ctp0550w.dat (with 550 decoder working but connectors from front panel is disabled)
ctp0468w.dat, ctp0469w.dat, ctp0464w.dat also working but is identical like ctp0465.dat

Maggreg I try that file you put up with dobly hehe well I did reinstalled I get sprakies noise threw my speakers I think you where missing files from that lol. So I reinstalled my driver and there gone lol. I'm glad your trying too

I need all help I can get lol.

Robert McClelland · Feb 13, 2008, 10:49 PM

Quote:

Originally Posted by djmaxi

maggreg THANX A MILLION TIMES, DE VERDAD MUCHISMAS GRACIAS and of course I cannot forget about Robert too.

Guys, you make possible to have something ever better than the original in the way it should be.

KEEP IT UP and join forces!!

Many thanks from me and all my friends in Argentina that follows this ansome work

Thanks for coment

That means I did fix mic issue after all?

djmaxi · Feb 13, 2008, 11:24 PM

Mic issue is fixed, and about the dolby mod here is working like charm. I`m having an Xtremegamer Fatal1ty.
In every situation you have those noises Robert?

Robert McClelland · Feb 13, 2008, 11:38 PM

I need look at tomorrow more

maybe I put worng one in lol

djmaxi · Feb 14, 2008, 12:04 AM

Last minute updated after another reinstall!!!

The decoder is working great, the problem is that the flexijack option is just greyed and it`s locked, so flexijack is always working as Digital I/O and I�m unable to select it as analog input or mic in. The 20db boost works but is not enough to get something from the mic, with it I can hear something, but without it is just impossible to get some signal from the mic using the flexijack.

Any idea?

Robert McClelland · Feb 14, 2008, 01:00 AM

Like I said I have look at durning weekend

If there a fix it won't come to Tuesday let you know.

bachikho · Feb 14, 2008, 07:57 AM

@robert: with 4.03 driver set, i can't access graphic equalizer (it says "out of memory"), does 4.04 set fix that (au2ZS with XP 32 bit english)?