kronns

hi from spain and excuse me for my english. I'm getting 8300 with atix1900xtx, Intel core duo 3 ghz, 2 gigas ram. I was read other similar user scores and all people get more 10000 For example this http://service.futuremark.com/compare?3dm05=1977696
http://service.futuremark.com/compare?3dm05=2101454
. In using catalyst 6.10 i was tryed other drivers but the situation is the same ¿why this? ¿whats the problem? you can see my computer specifications

CPU Info
CPU 1/1
Intel(R) Pentium(R) D CPU 3.00GHz
Manufacturer Intel
Family Intel(R) Pentium(R) D CPU 3.00GHz
Architecture 64-bit
Internal Clock 3.0 GHz
Internal Clock Maximum 3.0 GHz
External Clock 200.0 MHz
Socket Designation CPU 1
HyperThreadingTechnology Available - 2 Logical Processors
Capabilities MMX, CMov, RDTSC, SSE, SSE2, PAE, NX
Version Intel(R) Pentium(R) D CPU 3.00GHz
Caches
Level 1 32 KB
Level 2 4 MB
Level 3 0 B

Display Device 1/1
Radeon X1900 Series Driver 6.14.10.6641

Description Radeon X1900 Series
Manufacturer ATI Technologies Inc.
Total Local Video Memory 1.00 GB
Total Local Texture Memory 1.00 GB
Total AGP Memory 512 MB
Driver File ati2dvag.dll
Driver Version 6.14.10.6641
Driver Details 8.301-060926a-036790C-ATI
Driver Date 9-26-2006
Driver WHQL Certified true
Max Texture Width 4096 px
Max Texture Height 4096 px
Max User Clipping Planes 6
Max Active Hardware Lights 8
Max Texture Blending Stages 8
Fixed Function Textures In Single Pass 8
Vertex Shader Version 3.0
Pixel Shader Version 3.0
Max Vertex Blend Matrices 37
Max Texture Coordinates 8
VGA Memory Clock 0.0 Hz
VGA Core Clock 375.000000000

Memory Info
Total Physical Memory 2.00 GB
Free Physical Memory 1.66 GB
Total Pagefile Memory 3.35 GB
Free Pagefile Memory 3.06 GB

Motherboard Info
Supported Slot Types ISA, PCI, AGP
Manufacturer ASUSTeK Computer INC.
Model P5VDC-X
Version Rev 1.xx
BIOS Vendor American Megatrends Inc.
BIOS Version 0601
BIOS Release Date 08/22/2006
BIOS Properties Plug and Play, Flash
AGP
Revision 3.5
Rate 1x, 2x, 4x
Available Rate 0x00000007
Selected Rate 0x00000000
Aperture Size 0 B
Sideband Addressing supported (disabled)
Fast Write supported (disabled)

Hard Disk Info
Hard Disk Drive 1/2
Name ST3160827AS
Manufacturer (Unidades de disco estndar)
Capacity 149.05 GB
Model ST3160827AS
Interface Type IDE
Hard Disk Drive 2/2
Name ST380011A
Manufacturer (Unidades de disco estndar)
Capacity 74.53 GB
Model ST380011A
Interface Type IDE




powe suply akasa 500w

X1800XTTOP

Im not sure, but this;
VGA Memory Clock 0.0 Hz
VGA Core Clock 375.000000000

Doesnt look right at all. Start the Catalyst Control Center and check your overdrive tab and see if your clocks are set to their correct values.

bug77

1. You didn't install the motherboard drivers (though you probably would get lower than 8.8k if this was the case).
2. You switched from an nVidia card and didn't do a clean Windows install.

kronns

yes in the overdrive tab the values are ok core clock 650 and memory is right also.

kronns

thanks for the answer
1) i have installed the last via hyperion drivers
2) My last card was a ati x800 and i was reinstalled the system for install the new x1900xtx

X1800XTTOP

The motherboard information doesnt show that you have PCI-E support, wich is needed for the X1900XTX. But then again, i dont understand how you possible could boot if you DIDNT have a PCI-E slot. Are you sure you´ve installed the correct drivers?

kronns

my motherboard is a asus P5VDC-X, pone que el puerto pci-e es PCI-E X16 (max. X4 mode). could be the problem the max. x4 mode?

But with this benchmark i think that the problem isnt the x4 slot, this slot cuould set 200 points more o less in 3d mark but no 3 or 4000 points