|
|||||||
| Notices |
 |
|
|
LinkBack | Thread Tools |
Mar 12, 2006, 08:41 PM
|
#1 |
|
DriverHeaven Newbie
Join Date: Mar 2006
Posts: 2
 |
ati all in wonder 2006 problem.
I am a new member with lots of questions and until now with no one to answer them.
I purchased a new ati all in wonder 2006 256mb bus agp 8x graphics card. I removed the drivers for the old geforce2 4x card and installed the new card. Upon boot up I get no video. Nothing, no beeps no splash screen nothing. I made sure the vga cable was installed properly as well as the card. Card is seated properly and cable is secure. I am running a P4VTB with a VIA PT800 chipset PC3200 DDR400 512mb. 5 pci slots and 1 8x agp slot. I noticed in the bios that the 8x selection is non existent and the agp 3.0 selection is greyed out with a default of enabled. Judging by the specs I would beleive the card is compatible with my mobo. I have tried the new drivers from the via arena as well as the latest drivers from biostar to no avail. I try to install the drivers for the ati but get a message saying that the hardware is not found and incompatible with my present graphics adapter. obviously since I am running the geforce but decided to give it a shot. ATI has been no help and neither has Biostar. I also updated the Bios and still no video. Purchased the card from dell on 3/7/06. Please somone end this nightmare.  |
|
|
|
Mar 12, 2006, 09:51 PM
|
#2 |
|
DriverHeaven Extreme Member
|
What power supply do you have?
|
|
|
|
|
Mar 12, 2006, 10:26 PM
|
#3 |
|
DriverHeaven Newbie
Join Date: Mar 2006
Posts: 2
|
I am running an atx 300W power supply.
|
|
|
|
|
Mar 13, 2006, 03:21 PM
|
#4 |
|
Noise? What noise?
|
If its a no name PSU I'd upgrade, even if it isn't I'd strongly consider an upgrade
|
|
|
|
