Mic+Traktor: help routing

Master DJ · Oct 1, 2004, 08:04 AM

HI!
I use Traktor in this way: 4-5 for master and 6-7 for monitor.
But mic is udible only in 6-7, why??
I have to listen to mic only for master (4-5).
Please help me to route dsp.

byebye

Nando Dominguez · Oct 1, 2004, 08:23 AM

Hi, can you please explain how is your DSP setup or even better post a picture of it?

Nando

Master DJ · Oct 1, 2004, 01:49 PM

It's a 1024 value.

dsp Configuration: DEFAULT
4.1 config (no sub active, no surround)
ac97: mic active

I hope u'll give me a tip!

byebye

Nando Dominguez · Oct 1, 2004, 07:07 PM

Hi again Master DJ. I think the best thing you could do should be using the ProFx from LeMury instead of the default. I made an experimental preset for you:
http://www.iespana.es/NandoDominguez/Master%20DJ.kx

In the MX6 in5 controls Monitor (6-7) in6 is Master (4-5) in 1 is Mic in. The R button sends the signal to rec out which I sent to out 3-4 in k1lt (monitor). At this point I have to tell you that I just have one amp so I can't try it so check it in your system. So if you want any signal in monitor check this button. Optionally you could add reverb or delay or both of them to the mic in using S1 or S2.
Tell me if it works and/or ask me more.

Nando

Master DJ · Oct 1, 2004, 09:50 PM

Nando u're great..but when i try to load file in dsp i read "invalid file" then i cant try your preset. DAMN!

My KX release is 3537.
Try to give me an image of your dsp routin configuration.

byebye

Nando Dominguez · Oct 1, 2004, 11:45 PM

Sorry. The problem is that I've got an audigy, not a live and sometimes the presets don't work.
Here is a picture:
http://www.iespana.es/NandoDominguez/Dibujo.JPG

mic in, monitor and main are SRC plugs from the ProFX suite, I just renamed them. Not very sure about the outputs. Try these or other outputs in the k1lt plug. The only thing that you have keep in mind is that in MX6 the M button sends signal to main and R sends to record outputs. So everything connected to MX6 can be sent to both outputs the way you like. Please tell me how it works cause a dj friend of mine is wanting to do the same.
Cheers
Nando

Master DJ · Oct 2, 2004, 06:15 AM

No way, Nando!

With your config i have no ASIO, then traktor is MUTE.
I neeed a routing with ASIO support.
If u help me i will be very happy, i have to do a party tonite, but this problems seems to be without resolution

Im waitin for new routing

byebye

**dj_stick** · Oct 2, 2004, 06:24 AM

do you mean ASIO outputs? use the kX router to help you there

don't forget to change the settings of the src plugins

Nando Dominguez · Oct 2, 2004, 09:37 AM

>>don't forget to change the settings of the src plugins

Oops... sorry again, I forgot to tell you that. Thanx Chris. Yes you have to setup the SRC/mic as AC97 mic in, for SRC/monitor FxBus6/7 and for SRC/main FxBus4/5. All of this was done in the preset I sent you, but not explained. I also forgot that in MX6 the E button means enabled. Important.

PD. If you are not going to record you shouldn't need any asio channel.

**dj_stick** · Oct 2, 2004, 06:32 PM

in the default routing ASIO outs 4/5, 6/7 match the kX Wave outs so there should be no need to change the kX Router