MMC 9.14 Released (at last) discuss and vote here

**Spyre** · May 24, 2006, 01:55 PM

Resolved Issues

The following section provides information on issues that have been resolved with the latest release of the ATI Multimedia Center™. These include the following:

An AVI file can now be played back when a TV recording is also taking place
Launching the radio no longer results in the Select the default FM Radio device being listed as "Unknown AVStream Source 1"
The TV Source is no longer listed as "Unknown AVStream Source 1" in the "Scan for Channels" dialog box that appears during the TV initialization
A "No Signal Found" message is no longer displayed in the center of the screen after re-launching the MMC after its initial launch
Using GuidePlus+ to set a scheduled recording no longer results in the recording failing to activate
Creating a scheduled recording and selecting Start in Eazylaunch, no longer results in the recording starting in a windowed mode after restarting the MCE system
Argentina is now set to PAL_N_COMBO resolving issues that may have been experienced when using the TV
Using the MMC to watch TV followed by launching GuildPlus+, no longer results in the TV station change to channel 2
An ATIMMC.EXE error message is no longer displayed when using the ATI MMC to run a TV scan under the Windows operating systems

Known Issues with the ATI Multimedia Center™

The following section provides information on known issues and product limitation for the ATI Multimedia Center™ 9.14. These include the following:

Entering the Broadcast time option and selecting to start watching a TV program from the beginning after watching TV for an extended period of time may result in the Time Shift slider bar moving to the beginning, but the playback of the video remains in the same place. Further details can be found in topic number 737-21519
Scheduling a TV recording using any supported format, may on rare occasions result in the scheduled recording failing to start until using the mouse to click on any portion of the ATI MMC. Further details can be found in topic number 737-20031
Starting a UTV session, followed by switching from UTV to Component/S-Video, and then back to UTV may result in a momentary flash of static video and audio before the UTV session resumes normally. Further details can be found in topic number 737-21498
Setting the region to PAL may result in the UTV window appearing slightly off center. Further details can be found in topic number 737-21513
When playing a timeshifted file in EAZYLOOK™ mode the content cannot be exported by pressing the "Record" button on the remote control. Further details can be found in topic number 737-22384

H3X4D3C1M4L · May 24, 2006, 08:01 PM

It installed properly for me at least, thats 2 extra points from me.

Gonna see how it holds up, not getting my hopes up here.

ROBSCIX · May 24, 2006, 08:41 PM

It still has TV on Demand running By Default. A note when you install a new MMC and leave your Remote wonder software alone when they released a new version you MMC will crash on startup. So it seems that it is the MMC but in actuality it's the Remote wonder software. So I am assuming since they released a new Remote wonder version at the same times as the MMC the RW software must need to be installed also..I also have the MMC9.13 installed and all seems fine. The reg fix works to turn of TV on demand, same as older verions.

H3X4D3C1M4L · May 25, 2006, 10:06 AM

I gave it a 5.

Poor poor image quality, froze my computer (hardlock) once in 27 runs.
Crashes if I use Remote Wonder plugins for WM9 or Windows Volume Control
Slows down
Won't record in MPG or AVI format if I set the option no matter what, always .vcr

ROBSCIX · May 25, 2006, 11:06 AM

Well if you leave it stock, without applying the *.reg fix then the TV shows SD:240i -which yes is rather poor. If you apply the REG fix then it resorts to 480i which is a little better. I still cannot figure out why it does this? -I mean the resolution change..Wouldn't ATI figure that guys want the best picture quality Possible? -well the only way to get the best picture quality possible is to use the REG fix..

CJLMTLCA · May 25, 2006, 11:07 AM

Here's what i did:
Uninstalled MMC 9.13
Uninstalled PC/Encoder 9.13
Uninstalled MMC DAO 9.13
Uninstalled Remote Wonder 3.03 (got that dll register error)
Uninstalled CCC 6.4
Uninstalled Display Driver
Then:
Installed CCC 6.5
Installed Remote Wonder 3.04 (no dll error... good)
Installed MMC DAO 9.14
Installed PC/Encoder 9.14
Installed MMC 9.14
Added resolution with powerstrip and turned off TOD in registry.

FA. Just like before. Same things that i complained about in 9.13 thread are still here.
TOD still always on (ok hack the registry, whatever, not my idea of user-friendly).
No pause while recording.
Horrible static blast when TV starts, always scares me and leaves me wondering if i blew my speakers.
Channel change is not very smooth (software or hardware fault?).
TV keeps popping to front while browsing GP+, how annoying.
NOW button in GP+ brings you to current time slot but doesn't change TV channel like 9.08 used to. Actualy, TV should be in GP+ window, like before
and pressing a program in the guide should bring up it's info and not change TV only if you double-click or something. Just like a satellite's guide, you can browse and pull up program info and not disrupt what you are watching.
Still can't record... ???... I schedule something for 10:30, i come back at 10:35, is it recording? Can't tell if it's doing anything. I then minimise my windows to find the 'do you want to run scheduler' window. Nice. Ask me when it's time to record if i want to run it. Once that's done... ?... Schedule something else, again, nothing seems to be working.
GP+ isn't streamlined with the rest of MMC, that's the problem.
I rebooted to start TV from a fresh boot, tried switching inputs, which seems to be better now, then noticed that TOD is on... ???... Registry LiveMode is still 1, LIVE is showing at the bottom of TV panel but the progress bar is moving and HD is working... ???... Check in Library and yup, TOD entry right there... Have to look into this.

I guess it's like CCC releases, we expect the world to be changed and just set ourselves up for disappointment. Maybe by MMC 9.75 things will be better. In the meantime i will go to ebay, get a VCR from 1982 and have better functionality then 21st century hardware/software.

H3X4D3C1M4L · May 25, 2006, 03:08 PM

Even with regfix I still get poor quality

Robert McClelland · May 25, 2006, 05:28 PM

Did they fix the tv sound delay?

ROBSCIX · May 25, 2006, 06:27 PM

@RObert, I found that the AV sync issue was related -atleast for me- to the TVoD being on 100% of the time. Once that has been turned off then it's fine.
@CJL, Is it possible that the TVoD is turned on for the other inputs? -Svideo and Composite? -also I found that I needed to do the reg fix a few times before it actually took! I am serious..I would reload MMC and notice it said 240i again that tells me TVoD is on once again..now for some reason it's off and is staying off. So if you turn it off it should stay off for TV. This FIX also gives you 480i back..without it the TV is running in 240i which is half the quality, I don't know or care why ATI is doing this by default but I want it off. AS I said though sometimes you have to apply that fix a few times before it takes for whatever reason..lol
Also if you cycle through the MMC's inputs such as s-video and composite it'll turn TVoD back on for TV...this is veru annoying..

garfield · May 25, 2006, 06:44 PM

I am still using a all-in-wonder 9600 card and the tv is unwatchable. Not only is the quality poor but the bottom of the picture is missing and everyone has long heads. I rechecked the region settings and it says United States of America. Oh, and by the way I am getting an audio echo delayed by almost a second. How can they release this stuff without some testing on the lower end cards. We may have not spent as much money as some people but for $200 I expect better than this.

CJLMTLCA · May 26, 2006, 04:39 PM

Ok, i checked the registry and yes, livemode is back to 0, so i 1ed it and launched TV. No TVoD, ok. I then switched over to composite where TVoD was off, then to s-video and got the 'do you want to enable TVoD...' message so i answered no, then went back to TV and TVoD is running. Ha! Is there an Association Of TV On Demanders Of North America that i don't know about? Does ATI get royalties everytime TVoD is on?
However, for me it says 480i with it running... ???...
Let's try this again...

Computer, execute regedit.

Beep! regedit is now initiated.

ROBSCIX · May 26, 2006, 06:58 PM

Yes, if you cycle through the inputs it'll turn TVoD back on because thats the default. When I open my MMC I look and if it says 240i then I know TVoD is back on but it says 480i now. it'll tell you that you shouldn't have TVoD on for input's like S-video and composite then when it rolls back to Tuner it turns it back on because those inputs turn it off -does that make sense? - I just don't understand why ATI wants guys watching the TV in 240 interlaced instead of 480interlaced which is better Video Quality. It' hard to tell why ATI does anything..

CJLMTLCA · May 26, 2006, 08:05 PM

ok, i turned it off again... i just wasn't sure about the 240i story. Regardless of TVoD being on or off, mine always shows 480i...

BTW, anyone have corruption when dragging TV?

ROBSCIX · May 27, 2006, 05:31 PM

Nope I can drag the whole window or I can resize it etc. It behaves as it should. I am not sure why you would be getting such corruption going on.

H3X4D3C1M4L · May 27, 2006, 10:43 PM

That corruption happened to me until I reset all my hardware to stock clock speeds.... could have something to do with it but then again I've started OCing like a hero lately and my MMC didn't do that