can i unlock my ati x800pro's pipeline?

celica

i don't have vivo x800pro,i got ati one,is anyway i can unlock it ?thanks

bug77

No.

I can tell that you're new to this from the way you asked the question.

The thing is, you already have 12 active pipelines. You could enable extra 4 ones, but that would require hardware modifications to the card itself. I wouldn't recommend this to anyone who doesn't know exactly what he's doing.

Geminiwave

it works sometimes. most of the time it doesnt. Go check out rage3D for some details(I think its them that has the thing about non-Vivo) there are a very few people who have been able to do it.

Zebra

It is important that you have the VIVO version of the X800Pro first. You can identify it first off by looking at the box it came in, it's part of the SKU sticker. The other way to identify it, is by the yellow connector on the card at the same end as it's power connector. Then, you will need to pick up the flash program and the 16pipeline bios. It does NOT require any hardware modifications. Though the card will run hotter with the extra pipelines turned on.

I got everything I needed from here:
http://www.techpowerup.com/articles/...ng/vidcard/100

I started with the BIOS for the X800 Pro VIVO 16P (AGP) 256 MB. This will turn on the extra pipes without turning it into a X800XT PE. I would not flash right into a X800XT PE without a more adequate cooling solution.

Be sure to save your current BIOS first, in case you need to go back.