Line IN ?

noflip

ok first of all im a noob with the kx drivers so my question will be simple - how to get the line in input working. i have an electric guitar and i want to use it with guitar rig but before all of that i need to find a way to setup the line in input cause right now i cant hear any sound coming from the guitar. i tried everything in the mixer but nothing seems to unmute the line in input even if it says its unmuted. my card is sb0222 and i use the default DSP setup, i also have asio4all installed.
when i was using the normal SBlive driver it was as simple as selecting the line in input and pluging in the guitar but i probably am not doing something right here (there are a lot of sliders you know )

Russ

For use with MME or ASIO4ALL:

On the Recording page of kxmixer:
Make sure that the Master Recording level is set to 100.
Unmute the AC97 Recording level slider and set the level to 0 dB.

On the AC97 page of kxmixer:
Make sure that the GAIN slider is not muted.
Select Line In as the AC97 source in the AC97 Source selection combo-box.

-

Using kX ASIO is a little more complicated due to the ASIO mapping issue that exists with Live! 5.1 models.

On the Ins and Outs page of kX Mixer:
Unmute the AC97 In slider and set the level to 0 dB.

On the AC97 page of kX Mixer:
Make sure that the GAIN slider is not muted.
Select Line In as the AC97 source in the AC97 Source selection combo-box.

In the DSP window:
Disconnect the connections between the top 2 pins of prolog and xrouting,
Connect the top 2 pins of prolog to the ASIO 4/5 connectons on epilog.

Set your host software to use kX ASIO 4/5.

If that does not work, try selecting different stereo pairs for input, in the host software, until you find the one that works.

noflip

10x a lot. the thing is that i actually did all of that and it still didnt work and thats why i posted this thread. but when i reinstalled the drivers everything was fine. thanks for the ASIO setup i needed that info