Quote:
Originally Posted by Maddogg6
SPDIF uses a single patch cable, but it supposed to be video grade (typically a RCA composit video cable), - tho some people report success with good quality audio patch cables - where a cheap video one should work.
|
Like the "Digital CD Cable" that came with my Audigy 2 ZS, then?
Quote:
|
I have my live connected to my A2 with a CD SPDIF cable -and it just plugs in. no soldering - its all inside the case and hidden... your choice, my way took some care that I connected to the correct pins on the AD_EXT header of my Live card - but on the A2 - its using the CD SPDIF input... it was quite easy once I knew what pins where what on the Live AD_EXT header.
|
So, using the "Digital CD Cable", from the CD SPDIF connector on the A2ZS to the AUD_EXT connector on the Live? How did you figure out on which pins to attach it on? On another note, how would i go about linking the A2ZS to a SW1000XG card?
Quote:
|
Note - if you run 1 stereo pair from one card to another - and apply effects to that - it will apply it to the entire mix - unlike using the MIDI sends - where you apply any of the 4 effects to a single MIDI channel if you like. It allows 4 additional 'discrete' MIDI send effects - but once mixed and sent to the other card - independence is lost and effects will be applied to what ever is on that output from the other card.
|
Does this still apply if i were to hook up my A2ZS card to a SW1000XG?