ATi Mobility Radeon 9700+Windows XP x64Version SP2

Kourabies

Hi there to all

im running winxp x64version with sp2 on a Fujitsu-Siemens Amilo A1630 Laptop.Although i manage to get all the 64bit software for the drivers installation part i still got a problem trying to apply the Display Driver. The specification for the Laptop are the following:

AMD Athlon 64 3700+ Clawhammer 2.0GHz processor (1MB cache).
512MB DDR RAM (2x 256MB) PC2700, 333MHz.
40GB (4200rpm, 2mb cache) hard drive.
128mb ATi Mobility Radeon 9700 dedicated graphics.
15.4" widescreen 1280 x 800 display.
Integrated 802.11b/g Ralink wireless.
NEC ND-6500A DVD+/-RW dual layer.
Memory card reader- SD, MMC and Memory Stick.

As i said before the problems remains in applying the driver for the Graphics Card.What i want to ask is:If i run the latest Catalyst Driver(8-1_xp64_dd_ccc_enu_57720.exe) and then apply the MobilityDotNET4 modder pack will it "play" on the Windows XP x64version with SP2????


Thnsk in advance

Kourabies

Just for the record i manage to find the solution by myself
no need to worry just to let it be known for other people.
Ati Mobility Radeon 9700 and generaly speeking Mobility support
has been stoped after Catalyst Driver Ver.6.6.
For anyone looking to find a driver for x64 version WinXP just follow the step discribed below.
1.Download ModtoolV4 (x64 version).
2.Download Ati Catalyst Driver (x64 version).
(any version before 6.6).
3.After downloading the driver run it.It will extract all of its
contents into a folder on c:\ATI.
4.Stop the installation process as long it starts.
5.Open ModtoolV4 and locate the ATI Folder.
6.Press the "GOMOBILE" button and wait till finished.
7.After finish it start automatic in any message about
"Driver not digital signature etc." click "Continue Anyway"
8. Wait until finished then reboot.
9. After starting up give the Catalyst Center a few seconds to
check and make the final configuration.
10.Reboot (if u want).
11.Configure the resolution u need and DONE.