DriverHeaven.net - View Single Post - After 25% OC unable to get to Windows but boots?

mkk's System Specs
Processor:	Intel E7200 @ 3.8GHz (1.35V, 9x422, Thermalright 120Ultra, Scythe Slip Stream 800rpm fan)
RAM:	8GB DDR2 @ 422MHz (2GB Kingston ValueRAM PC6400, 1.8V)
RAM Timings:	5-6-6-19
Graphics:	HD3870 (800/1201) + Accelero S1 (fanless)
Mainboard:	Gigabyte P35-DS3 r2.1 (default FSB/NB voltages)
Power Supply:	FSP Epsilon 600
Operating System:	Vista x64
Primary Display:	BenQ G2400W (1920x1200)
Cooling:	CM Stacker 810, six Nexus DiskTwin for HDDs, two ADDA 1000rpm fans at about 600rpm for case exhaust.
Hard Drive 1:	2x Samsung 640GB HD642JJ
Hard Drive 2:	3x Samsung 500GB HD501LJ
Hard Drive 3:	Samsung 250GB
Hard Drive 4:	Some older Samsung drives ready to hotplug for backups.

Dec 23, 2007, 08:50 PM	#2 (permalink)
mkk Hezbollah supporter Join Date: Oct 2003 Location: Gefle, Sweden Posts: 3,116 System Specs	You will probably have to raise the CPU voltage a little bit. There might be some basic guide to overclocking on this forum.