DriverHeaven.net - View Single Post

Maddogg6 · Nov 8, 2007, 04:19 PM

CC# 16-19 are for 10K2 cards only... so they will mean nothing for you.

Also, Vienna 2.4 is supporting SF2.1 features (for X-FI support), kX only supports SF 2.01 features - and those modulator routing is SF 2.1 IIRC... so, you maybe able to adjust them in vienna, but kX wont use them (SF was designed with 'backwards compatibility' in mind)

as far as I know, to have the mod wheel to cause a varying volume, as opposed to the default of applying to pitch is not possible. You can do it manually by sending a series of CC7 in the waveform you desire. Sonar had ability to DRAW waveforms in the CC editor of the piano roll editor easily (was dropped tho).

You could also..
Open the kX Router - Save kX router settings...
Then Assign a kX Synth MIDI channel to use say FXB 11/12 for SEND A/B FXBuss - and connect Max M's Tremolo DSP plugin (*I think* its packaged with his UFX plugin pack - search the kX DSP forum - stickied at the top) to FXBuss 11/12... I think you'll like his tremolo effect - as it includes panning too

Then assign an un-used CC in kX Automation to control what ever you want (like depth) - and send that CC to kX CONTROL midi port.

Maddogg6's System Specs
Processor:	P IV (630) 3.0 Ghz
RAM:	2 x 512MB DDR2
Graphics:	FX6600
Mainboard:	Intel 915PCY
Operating System:	Windows XP

Nov 8, 2007, 04:19 PM	#2 (permalink)
Maddogg6 Tail Razer Join Date: Jun 2005 Location: Bernyurass, AZ - USA Posts: 3,665	CC# 16-19 are for 10K2 cards only... so they will mean nothing for you. Also, Vienna 2.4 is supporting SF2.1 features (for X-FI support), kX only supports SF 2.01 features - and those modulator routing is SF 2.1 IIRC... so, you maybe able to adjust them in vienna, but kX wont use them (SF was designed with 'backwards compatibility' in mind) as far as I know, to have the mod wheel to cause a varying volume, as opposed to the default of applying to pitch is not possible. You can do it manually by sending a series of CC7 in the waveform you desire. Sonar had ability to DRAW waveforms in the CC editor of the piano roll editor easily (was dropped tho). You could also.. Open the kX Router - Save kX router settings... Then Assign a kX Synth MIDI channel to use say FXB 11/12 for SEND A/B FXBuss - and connect Max M's Tremolo DSP plugin (I think its packaged with his UFX plugin pack - search the kX DSP forum - stickied at the top) to FXBuss 11/12... I think you'll like his tremolo effect - as it includes panning too Then assign an un-used CC in kX Automation to control what ever you want (like depth) - and send that CC to kX CONTROL midi port.